Kent · England

Sand Mastic in Stocker's Head

We cover Stocker's Head for traditional burnt sand mastic around sash and case windows and doors in stone and brick. Old sealant removed completely, joints prepared properly and a 12-month guarantee.

  • Modern sealant on a period surround
  • Gaps where the frame meets the masonry
  • Mastic round period door frames that has failed

Sand mastic near Stocker's Head

Leave it or put it right?

New sash windows are a major, costly change, and in listed buildings it may need consent. Where the frames are in good order, new mastic seals the surround. Where a wall is exposed, as many are in small places like Stocker's Head, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.

Why Stocker's Head customers choose us

  • More than 20 years in sealant work
  • Old sealant always removed completely
  • Domestic, commercial and hotel work
  • Neat joints and a tidy finish

Take a look at our cost guide or customer reviews.

Sand mastic for homes and businesses in Stocker's Head

We work across Stocker's Head renewing sand mastic on sash windows and doors. Every joint is cleaned out and filled by hand, finished to suit the masonry. We’re often asked to deal with mastic round period door frames that has failed and wind and rain getting in round a sash window, on period & listed homes, sash and case windows and timber door frames.

Outdoor sealant needs dry, clean surfaces, so work on frames around Stocker's Head is planned for dry weather. Tell us about access to every side of the house, including upper-floor windows.

A one-year guarantee comes as standard, so you are not left on your own once the job is done.

Where
Stocker's Head (TN27)
Region
Kent
Cover
A year, on every job
Quotes
Quoted before any work starts
Call
0345 464 0079
Updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

Frames and glazing around Stocker's Head

London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. With historic houses such as Belmont House and Gardens (about 3.9 miles north) nearby, there’s older building stock in the area around Stocker's Head as well as newer homes. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic.

If you let a flat or house near Charing station, cracked sand mastic around sash windows lets in the draughts tenants complain about. For an older house near a landmark such as Church of St Peter and St Paul, the joint between an old wall and a newer frame is usually the first place rain gets in.

Stocker's Head is about 6 miles north-west of Ashford, in Kent. Every kind of property in Stocker's Head is covered for sand mastic, old or new, large or small. Every job comes with our 12-month guarantee. We cover 922 towns and villages across Kent, from the larger towns to small villages. For nearby work, see our Chelmsford page (39 miles or so).

Our applicators cover all of TN27 for sand mastic. Nearby, we also carry out sand mastic in Charing Hill (1 mile west), Stalisfield (2 miles north), Stalisfield Green (2 miles north), Paddock (2 miles east) and The Valley (2 miles north). Further out, we also cover Maidstone (13 miles west), Ashford (6 miles south-east), Canterbury (12 miles east), Sittingbourne (9 miles north), Whitstable (13 miles north-east) and Faversham (7 miles north-east).

Around Stocker's Head

We work in homes and buildings around King's Head Public House and Spuckles and Kennelling Woods. For rail, the closest station is Charing station, about 1.3 miles south-west of the centre. Nearby you’ll also find Newnham Castle (4.7 miles north).

Map of Stocker's Head © OpenStreetMap contributors

Signs you need sand mastic in Stocker's Head

Paint, silicone or cement used over old mastic causes problems. They don’t suit the joint and we normally remove them.

The most common problems we see are:

  • Tired mastic found when preparing windows for paint
  • Weathered mastic on the most exposed windows
  • Mastic dropping out of the joint
  • Gaps between timber frames and stone or brick

Schools such as Charing Church of England Primary School are buildings too, and larger buildings have plenty of frames, and the mastic around each one ages.

Comparing quotes

  • Whether they seal over old material or remove it
  • How the colour is chosen
  • How long the guarantee is
  • Who turns up on the day

Choosing a sealant specialist

Keeping the joints in good condition

Aftercare is simple:

  • Clear gutters so water doesn’t pour onto the windows
  • Take care around the mastic when scraping paint
  • Ask a joiner to look at soft timber first
  • Check the mastic when you check the paintwork

Don’t run silicone over the new mastic. If you see a crack, ask us to take a look before trying a quick fix.

Sound mastic protects the frame. Once it fails, water can sit against the timber, which can lead to rot.

Your questions about sand mastic in Stocker's Head

Will you come out to Stocker's Head?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Do you work for landlords with property near Charing station?

Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.

Can you do several jobs on one visit?

Yes. Several rooms, windows or areas can go on one quote.

Will the old sealant be removed?

Yes. We cut out all the old sealant and clean the joint before resealing.

Can you work on commercial sites?

Yes. Larger jobs can be planned room by room or area by area.

Can you replace silicone on a period window with sand mastic?

Generally, yes. Once the silicone is out and the joint prepared we point it with sand mastic.

Is it possible to paint over sand mastic?

It’s traditionally left unpainted, which is what traditional guidance recommends. Ask us before decorating.

Do you have insurance?

Yes. Full insurance covers our work.

Landlords, agents and businesses in Stocker's Head

We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.

What the job involves on each surface

Timber door frames

Sand mastic is used round timber door frames too. The method is the same as for windows.

Tenement and terrace windows

Upper-floor windows need access planning. Tell us the height and we’ll confirm what’s needed.

What affects the quote in Stocker's Head

The price is agreed before any work begins. It takes into account:

  • Mould in or behind the old joints
  • Which sealant suits the joint
  • Whether the work is at height
  • Working hours on commercial sites

Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.

What we need to know

Before you ask for a quote, have a think about:

  • Where the property is
  • How we’d reach the joints
  • The problem you’ve noticed
  • Pictures of the joints, sent by email

Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job, and we’ll take it from there.

What we do, step by step

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours per window, depending on the condition of the joints. In a small place like Stocker's Head, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. Each surround is checked first.
  2. We rake out the old mastic and clean the joint.
  3. We fill deep gaps so the new mastic isn’t too thick.
  4. New sand mastic is applied and shaped by hand.
  5. We finish the mastic to a tidy line.

Before we arrive

  • Tell us about access, such as stairs, a lift or high-level joints
  • Try not to wet indoor joints just before the visit
  • For business premises, tell us about site rules or sign-in

Getting a quote

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you are ready, ring 0345 464 0079 or email us.

Get a quick quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job