Kent · England
Stocker's Head Fire Rated Sealant
Specialist fire rated sealant for Stocker's Head: careful preparation, the right product and tidy work. Call for a quick quote.
- Open holes round services passing through fire walls
- Gaps flagged on a fire risk assessment
- Standard silicone or caulk in a fire-stopping gap
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
About our fire rated sealant in Stocker's Head
We often work from an action list drawn up by a fire risk assessor for buildings in Stocker's Head. If you share the list, we can quote for the gaps that need fire-rated sealant. We work on pipe & cable gaps, plasterboard & masonry and service penetrations, and people most often call us about gaps left after a refit or conversion and cracked or shrunken fire-rated sealant.
Somewhere as small as Stocker's Head, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
A one-year guarantee comes as standard.
- Where
- Stocker's Head (TN27)
- Region
- Kent
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Signs you need fire rated sealant in Stocker's Head
In some buildings the gap was filled with the wrong thing in the first place: ordinary expanding foam, standard silicone or decorators’ caulk where a fire-rated seal was needed. It may look fine, but it is not a fire-rated seal.
Signs it’s time to call us include:
- Joints picked up in a fire-stopping survey
- Open holes round services passing through fire walls
- Door frames with gaps between frame and wall
- Fire stopping disturbed by later work
If you look after a church, hall or community building such as Church of St Peter and St Paul, service openings in its walls need the right fire-rated sealant, as in any building.
What your quote should include
- The length of the guarantee
- How the joint is cleaned and prepared
- What insurance they hold
- Whether VAT is included
Why it’s worth doing now in Stocker's Head
For some gaps, sealant isn’t the right answer and another system is needed. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap is not suitable for sealant, we’ll tell you. Around Stocker's Head, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote.
Why us?
- A 12-month guarantee on all work
- Any old sealant cut out fully, not covered over
- We’re fully insured
- Rated 4.9 stars on Google
See our cost guide and our reviews.
Places near Stocker's Head
Also in Stocker's Head
Fire rated sealant around Stocker's Head
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you let a flat or house near Charing station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Managing a site like Charing Church of England Primary School? Then service openings in fire-resisting walls need checking after any refurbishment.
Stocker's Head is about 6 miles north-west of Ashford, in Kent. Stocker's Head gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our area takes in 922 places across Kent. Our Chelmsford page covers work nearby.
We work across TN27 for fire rated sealant and the streets around it. Other places close to Stocker's Head include Charing Hill (1 mile west), Stalisfield (2 miles north), Stalisfield Green (2 miles north), Paddock (2 miles east) and The Valley (2 miles north). Within a short drive, we also cover Maidstone (13 miles west), Ashford (6 miles south-east), Canterbury (12 miles east), Sittingbourne (9 miles north), Whitstable (13 miles north-east) and Faversham (7 miles north-east).
Around Stocker's Head
In Stocker's Head, that means homes and buildings near King's Head Public House and Spuckles and Kennelling Woods. The closest station to Stocker's Head is Charing station, about 1.3 miles south-west of the centre. A little further out are Newnham Castle (4.7 miles north).
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Allow for resealing whenever new services are run
- Ask which product was used before you paint
- Look in service cupboards and ceiling voids from time to time
- Store the list of sealed gaps with your building paperwork
Do not drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Catching it then saves a separate visit later.
What we do, step by step
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it usually takes a few hours for a handful of gaps, and longer for a whole building. Somewhere as small as Stocker's Head, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- Clear the area around the work
- Plan for the work area to be out of bounds to pets and children
- Mention if the joints have been sealed before
Get a quote
Need a quote? Please ring 0345 464 0079 or send us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Read more
What affects the cost of fire rated sealant
Jobs vary more than people expect. What affects the quote:
- The size of the job
- How much old sealant there is and how hard it is to remove
- How many areas need sealing
- How easy the joints are to reach
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.
Asking for a quote
When you call or email, it’s useful to know:
- Whether it has been sealed before
- What’s wrong with the joints now
- Any access issues, like height or stairs
- Photos by email, if that is easy
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. Whenever you are ready, call 0345 464 0079 or send us an email.
Common questions in Stocker's Head
Can you help a landlord with a rental near Charing station?
Yes, we work for landlords and agents. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before any work starts.
Do you cover Stocker's Head for fire rated sealant?
Yes, Stocker's Head is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or email us and let us know what needs doing, and we’ll give you a clear quote.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in.
How much does fire rated sealant cost in Stocker's Head?
It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or email us with a short description of the job.
Can you fill the gap behind a fire door frame?
Yes, where the gap suits a sealant detail. We seal the frame-to-wall gap, not the door itself, and we’ll mention anything we notice about the door.
Do you offer different sealant colours?
Yes. White, clear and grey are common, and other colours are available for many products, and we agree the colour with you before work begins.
Do you carry out fire risk assessments?
No. We work from the specification you give us.
Can you tell me how many minutes the seal will last?
Ratings and certificates are not something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves.
What we cannot put right
To be straight with you, some problems need a different trade:
- Openings too large for sealant, which need batts, boards or another system
- Doors that aren’t fire doors in the first place
- Construction that does not provide fire resistance on its own
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
What we seal
- Linear gaps
- Pipe & cable gaps
- Door frames
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry