Kent · England
Remedial sealant & repairs in The Valley, Kent
Removing failed, mouldy or leaking sealant and putting it right in The Valley, with a 12-month guarantee on every job. Ask us for a quote.
- Sealant that came away because the surface wasn’t prepared
- A second bead peeling off the first
- Wide, uneven beads that look worse than the old ones
Remedial sealant in The Valley
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We are fully insured ARBOMaster approved applicators, and remedial work carries our one-year guarantee. We’re often asked to deal with sealant peeling off a dusty or damp surface and caulk or the wrong sealant used in a wet area, on failed movement joints, leaking tray & enclosure joints and mouldy bath & shower sealant.
Being in a small place like The Valley makes no difference to the job itself: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
A 12-month guarantee comes as standard, so you’re not left on your own once the job is done.
- Where
- The Valley (ME13)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Honest limits
We won’t take on work that will not last, so here’s what sealant cannot put right:
- Cracks in the fitting rather than the joint
- A tray or worktop that needs refixing first
- Sealant in an older building that needs testing for asbestos first
If you’re not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Surfaces we seal
- Mouldy bath & shower sealant
- Failed movement joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Expansion joints
- Leaking tray & enclosure joints
Landlords, agents and businesses in The Valley
If you manage several properties in or around The Valley, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and photos by email help.
We also work for property managers and facilities teams in The Valley and across Kent. We can quote a run of properties together, and we’re fully insured for the work.
The process
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes a few hours for most joints, depending on how much old sealant has to come out. In a small place like The Valley, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
How to prepare
- On commercial sites, let us know about site rules
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any water getting in
Ask for a quote
To get a quote, phone 0345 464 0079 or drop us an email with the location and a short description of the problem. You’ll have a clear quote before any work starts.
Related advice
Why deal with it now?
A joint that has failed twice will fail again unless the cause is dealt with. Taking time to find the cause, whether it’s movement, a leak or the wrong product, is what stops it happening again. Where a wall is exposed, as many are in small places like The Valley, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- A 12-month guarantee on all work
- 20+ years of sealant experience
- We leave the area clean and tidy
- Fully insured
Take a look at what affects the cost and our reviews.
Remedial sealant in The Valley: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as Church of St Lawrence, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
The Valley is about 6 miles south-west of Faversham, in Kent. Homes, rented property, offices and hotels in The Valley is covered for remedial sealant. The work is guaranteed for a year. Our area takes in 922 places across Kent, large and small. There’s also a page for Chelmsford, roughly 36 miles from The Valley.
All of ME13 is covered for remedial sealant. We also cover the places around The Valley: Stalisfield Green (1 mile south), Stalisfield (1 mile south), Eastling (2 miles north), Throwley Forstal (2 miles east) and Throwley (2 miles north-east). Further out, we also cover Maidstone (12 miles west), Ashford (8 miles south), Canterbury (12 miles east), Sittingbourne (7 miles north-west), Whitstable (12 miles north-east) and Faversham (6 miles north-east).
Around The Valley
We work in homes and buildings around Spuckles and Kennelling Woods and The Plough Inn and the streets around them. For rail, the closest station is Charing station, roughly 3.2 miles south. A little further out are Newnham Castle (2.3 miles north).
Nearby places to The Valley
Other services in The Valley
Common problems we fix in The Valley
Joints that move need sealant that can stretch. A bath that flexes, a tray that rocks or a building joint that opens and closes will split a rigid or thin bead.
Look out for any of the following:
- Wide, uneven beads that look worse than the old ones
- Sealant peeling off a dusty or damp surface
- Decorators’ caulk around a bath or shower
- Dark patches showing through the sealant
Rented homes near Charing station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
What to look for in a quote
- How the colour is chosen
- What preparation is included
- Whether they seal over old material or remove it
- What happens if they find a problem under the old sealant
Quotes for remedial sealant in The Valley
For a quick quote, just ask. What matters most is:
- How many rooms, windows or areas are involved
- When we can work, for business premises
- How much old sealant there is and how hard it is to remove
- The size of the job
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Helping us quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- The problem you’ve noticed
- Photos by email, if that is easy
- Where the property is
- How we’d reach the joints
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, ring 0345 464 0079 or send us an email.
Keeping the joints in good condition
So the new joints stay in good condition:
- Act on a lifting corner right away
- Have loose fittings fixed before resealing
- Keep the room well ventilated
- Do not add new sealant on top of old
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
Leaks through failed sealant grow over time. Each use pushes more water behind the bead, into floors, walls or ceilings. Sorting it early limits the damage.
Questions from The Valley
Can you do remedial sealant in The Valley?
Yes, The Valley is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or email us and tell us what needs doing.
Do you cover smaller places like The Valley?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is it worth trying it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and we clear up when we are done.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We will tell you what we’re using and why.
What if resealing won’t fix my leak?
That is why we look for the cause first. If the fault is elsewhere, you’ll know before any work is done.