Kent · England
Remedial Sealant in Stalisfield Green
Failed sealant joints in Stalisfield Green need attention? We remove the old material, prepare the joints and seal them properly.
- Caulk or the wrong sealant used in a wet area
- Gaps opening along the back of the worktop
- Leaks that keep coming back after resealing
What remedial sealant looks like in Stalisfield Green
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to Church of St Mary include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant. Letting a property close to Charing station? Then botched sealant from a previous quick fix is easier to strip out between tenants.
Stalisfield Green is about 6 miles south-west of Faversham, in Kent. Anywhere in ME13, we can carry out remedial sealant at your property. 922 places in Kent are on our list. Our Chelmsford page covers work nearby (37 miles or so).
All of ME13 is within our area for remedial sealant. Streets in the area include Hillside Road and Stalisfield Road, and we cover them all. If you’re just outside Stalisfield Green, we cover Stalisfield (1 mile east), The Valley (1 mile north), Stocker's Head (2 miles south), Charing Hill (2 miles south) and Eastling (2 miles north). We also work in nearby towns such as Maidstone (12 miles west), Ashford (8 miles south), Canterbury (12 miles east), Sittingbourne (7 miles north-west), Whitstable (12 miles north-east) and Faversham (6 miles north-east).
What’s near Stalisfield Green
We work in homes and buildings around The Plough Inn and Spuckles and Kennelling Woods and the streets around them. The nearest railway station is Charing station, roughly 2.5 miles south of the centre. Nearby you will also find Newnham Castle (3 miles north).
Remedial sealant in Stalisfield Green, done properly
A movement joint stops working when its sealant splits or sets hard. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. We are often asked to deal with products that weren’t meant for the joint and smears and lumps from a botched reseal, across failed movement joints, botched or over-sealed joints and leaking tray & enclosure joints.
Homes around Stalisfield Green are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Each job carries a 12-month guarantee, whatever its size.
- Where
- Stalisfield Green (ME13)
- Region
- Kent
- Guarantee
- One year on every job
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of remedial sealant
The price is agreed before any work begins. It’s based on:
- The size of the job
- How many areas need sealing
- Whether the work is at height
- The old material and how stubborn it is
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
What we need to know
When you call or email, these details help:
- Roughly how big the job is
- Whether it has been sealed before
- Where the property is
- Photos by email, if that’s easy
Getting a quote is simple: tell us what needs doing and where and its rough size. A few photos by email make the job easier to understand.
How to look after the new joints
So the new joints stay in good condition:
- Air the bathroom so the sealant can dry
- Check ceilings under showers for marks
- Check trays and worktops don’t move
- Don’t wait for a small gap to become a leak
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into whatever is behind or below. Sorting it early limits the damage.
FAQs for Stalisfield Green
I let a flat near Charing station. Can you help?
Yes. We work for landlords and letting agents as well as householders. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Is Stalisfield Green within the area you cover?
Yes. Stalisfield Green is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is there any odour?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Is it worth trying it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Where is Mr Mastic based?
We are based in Crawley, West Sussex, and we work across South East England, London and Scotland.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we’re using.
Nearby places to Stalisfield Green
What else we do in Stalisfield Green
Work for landlords, hotels and businesses
For anyone letting property in or around Stalisfield Green, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
Surface by surface
Worktops & kitchens
A loose worktop splits its sealant. That needs refixing before resealing, and we’ll tell you if we find it.
Movement & expansion joints
A sealant stuck to the back of the joint cannot stretch. Backing rod or bond-breaker tape prevents it, so the sealant grips the two sides only.
Why act early in Stalisfield Green
Mould under a bead can’t be reached by cleaning. The layers have to come out. Around Stalisfield Green, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re unsure, ring 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Why Stalisfield Green clients choose us
- Quality sealants from Arbo and Everbuild
- Over 20 years’ experience
- Fully insured
- A 12-month guarantee on all work
Read our cost guide or what customers say.
DIY sealant or a professional job?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
What we do, step by step
You don’t need to clear the whole room or building, only the area right around the joints. Everything nearby is protected, and the job takes a few hours, depending on how many layers have to come out for a typical job. Somewhere as small as Stalisfield Green, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
Getting ready for the visit
- Mention any tricky access
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about earlier repairs to the joints
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.