Kent · England
Round Street Remedial Sealant
Problem with your failed sealant joints in Round Street? We remove the old material, prepare the joints and seal them properly.
- Thick, messy sealant smeared over tiles
- Kitchen joints letting water behind the worktop
- Sealant peeling off a dusty or damp surface
About our remedial sealant in Round Street
If a joint fails again and again, something is causing it. A tray that moves, a worktop that is not fixed, the wrong sealant or water getting in elsewhere will defeat even a perfect bead. We look for the cause before we reseal. If you have thick, messy sealant smeared over tiles and worktop sealant that has shrunk and split, we can help, on botched or over-sealed joints, mouldy bath & shower sealant and leaking tray & enclosure joints alike.
Around Round Street, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
All of our work is guaranteed for twelve months, in Round Street and everywhere else we cover.
- Place
- Round Street (DA13)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
How to look after the new joints
Looking after new joints is easy:
- Use a soft cloth, not a scourer, on silicone
- Don’t point over movement joints
- Find out why the sealant failed first
- Keep an eye on the ceiling below the bathroom
Leave the new joint to cure fully before it gets wet or moves: usually around 24 hours, or as long as we advise.
Movement joints that have split let water into the structure, and the longer it’s left, the more the joint edges break down. A joint with sound edges is far easier to reseal.
Also near Round Street
Other services in Round Street
What we can’t put right
To be straight with you, some problems need a different trade:
- Cracks in the fitting rather than the joint
- Plumbing leaks behind walls or under trays
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think.
Surfaces we seal
- Shrunken worktop sealant
- Failed movement joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Expansion joints
- Botched or over-sealed joints
FAQs for Round Street
Do you cover Round Street for remedial sealant?
Yes. Our work covers London and the South East, and Round Street is part of that. You can call 0345 464 0079 or email us and let us know what needs doing, and we will give you a clear price.
I let a flat near Sole Street station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can call 0345 464 0079 or email us with the details for a clear quote.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
Someone sealed over the old bead. Can you fix it?
Yes. It’s slower than a standard reseal, because every layer has to come out cleanly, but it’s what makes the new bead last.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
How long should I leave it?
Most sealants are touch-dry well before they’re fully cured. We’ll give you the cure time for the product we used.
Do you have insurance?
Yes. We are fully insured for every job we do.
Landlords, agents and businesses in Round Street
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will give you a quote.
Landlords and agents in Round Street can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order.
What remedial sealant looks like in Round Street
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For site and facilities teams at buildings such as Cobham Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. Letting a property close to Sole Street station? Then a joint that keeps failing is best fixed properly while the property is empty. In the older streets around St Mary's Room, older homes can move a little, which is hard on rigid grout and tired sealant.
Round Street is about 3 miles south of Gravesend, in Kent. Wherever you are in the DA13 postcode area, we cover remedial sealant for homes and businesses. Our area takes in 922 places across Kent, from the larger towns to small villages. We also work in London, around 22 miles away.
Jobs for remedial sealant in DA13 is quoted and booked the same way as anywhere else. We also cover Sole Street (1 mile south), Gold Street (1 mile south-east), Nash Street (1 mile west), Meopham (1 mile south-west) and Henley Street (1 mile south-east). Within a short drive, we also cover Maidstone (11 miles south-east), Dartford (8 miles north-west), Sevenoaks (11 miles south-west), Gravesend (3 miles north), Tonbridge (14 miles south) and Northfleet (3 miles north-west).
Around Round Street
We work in homes and buildings around The Railway Inn, Jeskyns and Meopham School. The closest station to Round Street is Sole Street station, about 0.6 miles south of the centre. Nearby you will also find Gravesham Museum (3.5 miles north) and Gravesham Community Hospital (3.6 miles north). Not far away are Gad's Hill and Ranscombe Farm.
Can I do it myself?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Leave it or put it right?
Spraying mould remover on a sealed-over joint doesn’t reach what’s underneath. The layers have to come out, so the joint can be treated and resealed. In a small place like Round Street, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
Why us?
- Approved under the ARBOMaster scheme
- We leave the area clean and tidy
- A 12-month guarantee on all work
- Anti-fungal silicone where joints get wet
What the job involves on each surface
Leaking trays & enclosures
When failed joints are the cause, they’re all cut out and renewed, tray edges and screen profiles included.
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. Once it’s all removed, the joint is treated.
What happens on the day
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a few hours, depending on how many layers have to come out. In a small place like Round Street, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you’re told about anything else we found.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Mention if the joints have been sealed before
- Try not to wet indoor joints just before the visit
Getting a quote
Want a quote for remedial sealant? Please ring 0345 464 0079 or email us with a few details. You will know what we plan to do, and what it will cost, before any work begins.