Kent · England
Round Street Bathroom Resealing
Professional bathroom resealing in and around Round Street, with every bit of old sealant taken out first and a one-year guarantee.
- Water escaping at the shower enclosure
- Damp behind the bath or under the tray
- Shrunken sealant along the back of a worktop
Bathroom resealing in Round Street: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For landlords with property near Sole Street station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. In the older streets around St Mary's Room, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Round Street is about 3 miles south of Gravesend, in Kent. Round Street gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. 922 places in Kent are on our list. London is on our list too, around 22 miles away.
Here we cover the DA13 postcode area for bathroom resealing. Close by, we work in Sole Street (1 mile south), Gold Street (1 mile south-east), Nash Street (1 mile west), Meopham (1 mile south-west) and Henley Street (1 mile south-east). Within a short drive, we also cover Maidstone (11 miles south-east), Dartford (8 miles north-west), Sevenoaks (11 miles south-west), Gravesend (3 miles north), Tonbridge (14 miles south) and Northfleet (3 miles north-west).
Local landmarks in Round Street
Typical jobs here are in homes near The Railway Inn, Jeskyns and Meopham School, among other places. For rail, the closest station is Sole Street station, about 0.6 miles south. A little further out are Gravesham Museum (3.5 miles north) and Gravesham Community Hospital (3.6 miles north). Not far away are Gad's Hill and Ranscombe Farm.
Bathroom resealing in Round Street, done properly
Across Round Street, the joints we reseal are the ones that fail in any home: bath edges, tray joints, basin backs and kitchen upstands. Every joint is cut out, cleaned and left dry before it’s resealed. We work on baths, kitchen worktops & upstands and sinks & splashbacks, and people most often call us about smears of silicone across the tiles and water escaping at the shower enclosure.
For a small place like Round Street, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
We stand behind the work with a 12-month guarantee, so you are not left on your own once the job is done.
- Location
- Round Street (DA13)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Price
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Why act early in Round Street
The difference in a professional reseal is mostly what you don’t see: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Without that preparation, the new bead won’t last. In a small place like Round Street, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- One-year guarantee on every job
- White, clear, grey or coloured to suit, where the product allows
- Over 20 years’ experience
- Anti-fungal silicone where joints get wet
Read what affects the cost and our reviews.
What affects the quote in Round Street
Every job gets its own quote. These are the things that affect it:
- The product the joint needs
- Whether there’s mould to deal with
- Working hours on commercial sites
- The amount of work
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What to tell us for a quote
To make quoting easier, let us know:
- Whether it’s a home or a business
- The problem you’ve noticed
- Where the job is, and your postcode
- Any access issues, like height or stairs
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that’s easy.
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Wipe the sealant dry after showering
- Check the joints every few months for splits or lifting
- Never pick at the silicone with a blade
- Wait for the cure time we give you
Give the silicone time to cure before it gets wet, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.
What we’re called out for in Round Street
Not every tube in the shop is meant for a shower. Decorators’ caulk and all-purpose sealants are not made for constant wetting, so they stain, crack or go mouldy before long. A bathroom joint needs anti-fungal sanitary silicone.
Most people get in touch when they notice something like this:
- A reseal done over the top of the old bead
- A joint torn by a bath that flexes
- Failed sealant on the screen profile
- Lumpy, uneven sealant from a DIY attempt
For site and facilities teams at buildings such as Cobham Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Comparing quotes
- What preparation is included
- Whether you can choose the colour
- Is the old sealant removed completely?
- What product goes in the joint
What the job involves on each surface
Wet rooms
Wet room floors move slightly as they’re used, so the internal corners need silicone rather than grout. Cracked grout in a corner can be cut out and replaced with silicone.
Sinks & splashbacks
Water getting under the rim of an inset sink can soak the worktop. We reseal the visible edge of the sink where it has failed.
Work for landlords, hotels and businesses
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
How the visit works
All our tools and materials come with us in the van. After a quick look at the joints together, we protect the area and start. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere as small as Round Street, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We clear away and tell you when it can get wet, usually after around 24 hours.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Let us know about stairs, lifts or work at height
- Move anything stored near the joints
Getting a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Related advice
Nearby places to Round Street
Also in Round Street
FAQs for Round Street
Will you come out to Round Street?
Yes, Round Street is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you do bathroom resealing in Round Street?
Yes. We work across London and the South East, and Round Street is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing, and we will give you a clear quote.
Where are you based?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.
Can I choose the colour of the sealant?
We can use white, clear or a colour to suit. On a worktop we colour-match where the joint shows.
Can new silicone go straight over the old?
No. New silicone will not bond to old silicone, so it lifts and traps water and mould underneath. We always take the old sealant out completely.
Can you reseal around my kitchen sink and worktop?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
Do you remove the old sealant?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.