Kent · England
Round Street Floor Joint Sealing
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homes and businesses in Round Street and across Kent. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Gaps between floors and kitchen plinths
- Grout used at the floor edge instead of sealant
- Grout cracking in a straight line across a floor
How we handle floor joint sealing in Round Street
We seal floor joints in homes, offices and commercial buildings across Round Street. We start by checking the floor type and the joint, because the right sealant depends on both. If you have gaps at thresholds between rooms and open joints that fill with dirt, we can help.
Somewhere as small as Round Street, new homes tend to be conversions, self-builds or a few houses rather than an estate. Each still needs its sealant and floor joints finished properly.
We stand behind the work with a one-year guarantee, so you are covered after we have gone.
- Where
- Round Street (DA13)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What we cannot put right
Sealant is not the answer to every problem, and we’d rather say so up front. It will not solve:
- Cracked or broken concrete slabs
- Water getting under the tiles from elsewhere
- Large cracks that need a surveyor
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think before you book.
What we seal
- Concrete floor joints
- Wet room & bathroom floors
- Thresholds
- Commercial floors
- Tiled floors
- Skirting boards
Questions from Round Street
Do you work for landlords with property near Sole Street station?
Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Is Round Street in your area for floor joint sealing?
Yes. Our work covers London and the South East, and Round Street is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll send you a clear quote.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Can you seal where the floor meets the bath panel?
Yes. Where a floor meets a bath panel, kitchen plinth or skirting in a wet area, we use a flexible silicone so water cannot get into the gap.
Can you quote for more than one area?
Yes, we can. More than one area can go on one quote.
Why not just use caulk?
Caulk works on still, dry joints, but it cracks where there’s movement or water. We use a flexible sealant for most skirting and floor joints.
Do you use a paintable sealant?
It depends on the sealant, so let us know first. We use a paintable flexible sealant on joints you plan to paint.
When can I walk on the floor?
That varies with the sealant and the room. Before we leave, we tell you when it can be walked on, mopped and driven over.
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Check the sealant is paintable before decorating
- Vacuum floor joints regularly to stop grit building up
- Have a cracking tiled floor checked before tiles break
- Keep caulk for dry, still joints only
Avoid flooding the floor when you clean. Keeping the edges drier helps the sealant last longer.
A gap under the skirting collects dust and lets draughts through. Sealing it early keeps the room cleaner.
Floor joint sealing around Round Street
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
If you let a flat or house near Sole Street station, gaps at skirtings and thresholds are worth sealing between tenancies. Managing a site like Cobham Primary School? Then floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. For buildings such as St Mary's Room, floor and skirting joints in halls and kitchens wear like any others.
Round Street is about 3 miles south of Gravesend, in Kent. Our applicators cover floor joint sealing for homes and businesses in Round Street and the surrounding area. 922 places in Kent are on our list, large and small. You can also see our page for London, roughly 22 miles from Round Street.
Jobs for floor joint sealing in DA13 is quoted and booked the same way as anywhere else. If you’re just outside Round Street, we cover Sole Street (1 mile south), Gold Street (1 mile south-east), Nash Street (1 mile west), Meopham (1 mile south-west) and Henley Street (1 mile south-east). We also work in nearby towns such as Maidstone (11 miles south-east), Dartford (8 miles north-west), Sevenoaks (11 miles south-west), Gravesend (3 miles north), Tonbridge (14 miles south) and Northfleet (3 miles north-west).
Near you in Round Street
We work in homes and buildings around The Railway Inn, Jeskyns and Meopham School and the streets around them. The closest station to Round Street is Sole Street station, about 0.6 miles south. Well-known places in the area include Gravesham Museum (3.5 miles north) and Gravesham Community Hospital (3.6 miles north). For a walk, there’s Gad's Hill and Ranscombe Farm.
Can I do it myself?
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
What affects the quote in Round Street
Call for a quick quote. The main things that affect it are:
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
- Which sealant suits the joint
- How many areas need sealing
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or email us and we will talk you through it.
Helping us quote
Before you ask for a quote, have a think about:
- Roughly how big the job is
- Whether it’s a home or a business
- Whether it has been sealed before
- What’s wrong with the joints now
Want a quote for floor joint sealing? Please phone 0345 464 0079 or send us an email with a few details. We will explain what we’d do and send you a clear quote before any work starts.
How it works
At the end, we look at the finished work together and explain the cure time. The work normally takes a few hours, depending on the length of joint, depending on the size of the job. Somewhere as small as Round Street, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We clear the edges of the floor so the joints are easy to reach.
- We take out the cracked caulk, grout or old sealant.
- We clean and dry the edges of the joint.
- We apply a flexible sealant suited to the floor and smooth it.
- We check the joints and explain the aftercare.
Getting ready for the visit
- Mention any sign-in or site rules at work premises
- Keep pets and children clear of the area while we work
- Mention any tricky access
Get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, call 0345 464 0079 or drop us an email.
Related advice
Landlords, agents and businesses in Round Street
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
For anyone letting property in or around Round Street, several properties can go on one quote. Send us the addresses and the work at each, and pictures by email help.
Surface by surface
Commercial floors
In commercial buildings, we can plan floor joint work around opening hours. Out-of-hours working can be arranged where it’s needed.
Thresholds
Where a tiled floor meets timber or carpet, the joint takes movement from both sides. We bridge them with a flexible bead.