Kent · England
Floor & skirting joints in Nash Street, Kent
Floor joint sealing in Nash Street from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Open gaps along the bottom of skirting boards
- Caulk that has cracked where the floor moves
- Threshold joints that have opened or worn
Should I try it myself first?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Floor joint sealing for homes and businesses in Nash Street
Floor joint sealing is mostly about choosing the right product and preparing the joint. Old caulk, grout or failed sealant comes out first, then clean, back and seal the joint. We work on commercial floors, tiled floors and wet room & bathroom floors, and people most often call us about gaps between floors and kitchen plinths and threshold joints that have opened or worn.
For a small place like Nash Street, the journey and access are planned in advance, and the work itself is the same as on any site.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Nash Street (DA13)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Nash Street
Also in Nash Street
Landlords, agents and businesses in Nash Street
For anyone letting property in or around Nash Street, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and pictures by email help.
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
Why act early in Nash Street
Caulk is quick and cheap, but it cracks where the joint moves or gets wet, so the gap reappears. A flexible sealant moves with the floor and keeps the joint sealed. Around Nash Street, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
What you get with us
- Over 20 years’ experience
- Tidy, careful work
- Old sealant always removed completely
- Approved under the ARBOMaster scheme
Take a look at what affects the cost or customer reviews.
Joints and finishes in Nash Street homes
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
Community buildings like Church of St Mildred are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear. Managing a site like Istead Rise Primary School? Then floor and threshold joints in busy corridors wear quickly and are best resealed early. For landlords with property near Meopham station, open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Nash Street is about 3 miles south of Gravesend, in Kent. Homes, rented property, offices and hotels in Nash Street is covered for floor joint sealing. The work is guaranteed for a year. Our Kent coverage runs to 922 places, Nash Street among them. For nearby work, see our London page.
We cover every part of DA13 for floor joint sealing. Nearby, we also carry out floor joint sealing in Round Street (1 mile east), Longfield Hill (1 mile south-west), Meopham (1 mile south), Sole Street (1 mile south-east) and New Barn (1 mile west). Further out, we also cover Maidstone (12 miles south-east), Dartford (7 miles north-west), Sevenoaks (11 miles south-west), Gravesend (3 miles north), Tonbridge (14 miles south) and Northfleet (3 miles north).
Landmarks near Nash Street
We work in homes and buildings around Meopham School and Jeskyns, among other places. Nash Street’s nearest station is Meopham station, about 0.7 miles south of the centre. Other landmarks nearby include Stone Castle (4.7 miles north-west) and Gravesham Community Hospital (3.2 miles north). The countryside around Nash Street includes Sawyers Lake and Gad's Hill.
How we quote for floor joint sealing
Your quote is based on your job. We look at:
- How many areas need sealing
- Which sealant suits the joint
- The size of the job
- When we can work, for business premises
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll go through it with you.
Helping us quote
There’s no need for technical detail. Just tell us:
- If it’s domestic, commercial or a hotel
- The rough size of the job
- What the problem is, such as mould, gaps, leaks or cracking
- If someone has resealed it before
Need a quote? Please ring 0345 464 0079 or email us with a few details. We will explain what we’d do and send you a clear quote before any work starts.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Cone off fresh joints until they’re ready
- Use a well-wrung mop rather than flooding the floor
- Do not fill floor joints with caulk where they move or get wet
- Use furniture pads near skirting
Keep heavy traffic off resealed concrete joints for the cure time we give you. Cone off the area if needed while it cures.
A tiled floor that cracks along a line will keep cracking until it can move. A flexible joint added early helps protect the tiles themselves.
What happens on the day
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it generally takes a few hours for most rooms, longer for large commercial floors. Somewhere like Nash Street needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First we check the joint and the floor and agree which sealant suits it.
- Old caulk, grout or sealant is removed from the joint.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- We tool the joint neatly and tell you when it can be walked on and cleaned.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Tell us if parking is tricky
- Try not to wet indoor joints just before the visit
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email pictures if that’s easy.
Read more
Common questions in Nash Street
Do you cover smaller places like Nash Street?
Yes, Nash Street is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Meopham station?
Yes, we work for letting agents and landlords. You can call 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before work begins.
Can you seal where the floor meets the bath panel?
Yes. These joints get wet every time the floor is cleaned, so a flexible silicone is the right choice.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
How much does floor joint sealing cost in Nash Street?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You’ll get a clear quote before any work starts.
What information do you need?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we will tell you what we are using.
Will the old sealant be removed?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
What sealant work can’t fix
Before you book, it’s worth knowing the limits too:
- Large cracks that need a surveyor
- Subfloor problems that need a flooring contractor
- Leaks from a failed tanking system
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly.
Joints and surfaces we work on
- Thresholds
- Skirting boards
- Wet room & bathroom floors
- Tiled floors
- Concrete floor joints
- Commercial floors