Kent · England
Remedial sealant & repairs in Nash Street, Kent
Remedial sealant for Nash Street, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Over-sealed joints coming away
- Sealant that came away because the surface wasn’t prepared
- Black mould underneath the bead
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Remedial sealant in Nash Street, done properly
Some sealant jobs are not a simple reseal, because someone has already had a go. Silicone laid over silicone, smears across tiles, the wrong product in a moving joint or mould trapped underneath all need stripping out. If you’re dealing with black mould underneath the bead and sealant peeling off a dusty or damp surface, we can put it right, on failed movement joints, botched or over-sealed joints and mouldy bath & shower sealant alike.
For a small place like Nash Street, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Nash Street (DA13)
- Region
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
What remedial sealant looks like in Nash Street
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For site and facilities teams at buildings such as Istead Rise Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you live in an older home near Church of St Mildred, older homes can move a little, which is hard on rigid grout and tired sealant. For landlords with property near Meopham station, botched sealant from a previous quick fix is easier to strip out between tenants.
Nash Street is about 3 miles south of Gravesend, in Kent. Nash Street gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. 922 places in Kent are on our list. Our London page covers work nearby.
Our applicators cover all of the DA13 postcode area for remedial sealant. Close by, we work in Round Street (1 mile east), Longfield Hill (1 mile south-west), Meopham (1 mile south), Sole Street (1 mile south-east) and New Barn (1 mile west). Further out, we also cover Maidstone (12 miles south-east), Dartford (7 miles north-west), Sevenoaks (11 miles south-west), Gravesend (3 miles north), Tonbridge (14 miles south) and Northfleet (3 miles north).
What’s near Nash Street
Locally, jobs take us to homes and businesses close to Meopham School and Jeskyns and the streets around them. For rail, the closest station is Meopham station, roughly 0.7 miles south of the centre. A little further out are Stone Castle (4.7 miles north-west) and Gravesham Community Hospital (3.2 miles north). The countryside around Nash Street includes Sawyers Lake and Gad's Hill.
How we quote for remedial sealant
We do not publish a price list. The quote depends on:
- Mould in or behind the old joints
- Whether old sealant or filler has to be cut out
- Working hours on commercial sites
- The number and length of the joints
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What we need to know
There’s no need for technical detail. It helps if you can tell us:
- Roughly how big the job is
- Where the property is
- Any previous sealing or DIY work
- Pictures of the joints, sent by email
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Aftercare tips
After the cure time, these simple habits help:
- Run the fan after every shower
- Don’t add new sealant on top of old
- Deal with small splits early
- Keep an eye on the ceiling below the bathroom
Keep the room ventilated: run the fan during and after showers, or open a window.
Signs to act on: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Each one is worth getting looked at.
Work for landlords, hotels and businesses
Landlords and agents in Nash Street can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
In hotels, rooms out of use cost money, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
What sealant work can’t fix
New sealant cannot fix everything, and we’d rather say so up front. It will not solve:
- Plumbing leaks behind walls or under trays
- Water damage behind tiles that needs a tiler
- A cracked shower tray or bath (that needs repair or replacing)
Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly.
Where we work in Nash Street
- Botched or over-sealed joints
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Failed movement joints
- Expansion joints
Nearby places to Nash Street
What else we do in Nash Street
What the job involves on each surface
Over-sealed & botched joints
Every layer has to come out, including the smears and film on surrounding tiles. New sealant needs a fully clean surface.
Worktops & kitchens
Kitchen joints often have grease and cleaning residue deep in them, so we spend extra time cleaning.
What happens on the day
Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and clear up. Most jobs take a few hours, depending on how many layers have to come out. Somewhere as small as Nash Street, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
How to prepare
- Mention any leaks or damp you’ve noticed
- Let us know about earlier repairs to the joints
- Move anything stored near the joints
Ask for a quote
For remedial sealant in Nash Street, call 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.
Related advice
Nash Street: your questions answered
Do you cover smaller places like Nash Street?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Meopham station?
Yes, we work for letting agents and landlords. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear quote.
Do you take out the old sealant first?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Do you have insurance?
Yes. Full insurance covers our work.
How long does the work take?
Longer than a simple reseal, because every layer has to come out. Most jobs take a few hours.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
What if resealing will not fix my leak?
We’ll tell you. If it’s a cracked tray, a failed valve or a leaking waste, resealing will not fix it, so we won’t pretend it will.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.