Medway · England

Remedial sealant & repairs in Peters Village, Medway

Our applicators work in Peters Village on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.

  • Kitchen joints letting water behind the worktop
  • Black mould underneath the bead
  • Caulk or the wrong sealant used in a wet area

Remedial sealant in Peters Village

Remedial sealant in Peters Village, done properly

If a joint fails again and again, something is causing it. Movement, the wrong product or a leak from somewhere else will defeat even a perfect bead. Finding that cause comes before any new sealant. We’re often asked to deal with floor or wall movement joints that have failed and a second bead peeling off the first, across expansion joints, failed movement joints and mouldy bath & shower sealant.

Even in a smaller place like Peters Village, bathrooms and kitchens see heavy daily use. Older or newer, every room gets the same approach: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.

All of our work is guaranteed for twelve months.

Place
Peters Village (ME1)
Wider area
Medway
Guarantee
12 months on all our work
Price
A clear quote up front
Telephone
0345 464 0079
Updated
26 October 2026
Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles

Keeping the joints in good condition

Aftercare is simple, and it makes a real difference:

  • Check ceilings under showers for marks
  • Ask why a joint failed before redoing it
  • Always have old sealant cut out, not covered
  • Do not wait for a small gap to become a leak

Keep an eye on the joint at first, especially if movement was the problem. If anything changes, just call 0345 464 0079 or email us.

Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.

Surface by surface

Leaking trays & enclosures

A cracked tray, failed valve or leaking waste needs a different fix. We say so rather than reseal.

Worktops & kitchens

A loose worktop splits its sealant. That needs refixing before resealing, which we’ll point out.

What we’re called out for in Peters Village

Even good sealant ages. Mould grows into the silicone, the surface hardens and the bead shrinks. At that point it has to come out.

Common reasons people contact us include:

  • Products that weren’t meant for the joint
  • Dark patches showing through the sealant
  • Sealant applied over old sealant that has lifted
  • Torn expansion joints

For an older house near a landmark such as St Mary's Church, older homes can move a little, which is hard on rigid grout and tired sealant.

Before you book anyone

  • How hidden problems are handled
  • What guarantee comes with the work
  • Whether the sealant suits the joint
  • Are they insured?

Choosing a sealant specialist

DIY sealant or a professional job?

A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.

If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

What affects the cost of remedial sealant

We quote each job individually. These are the things that affect it:

  • Whether there’s mould to deal with
  • Working hours on commercial sites
  • Whether old sealant or filler has to be cut out
  • Whether the work is at height

A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are not sure whether it needs doing, phone 0345 464 0079 or send us an email for an honest opinion and a quote.

What to tell us for a quote

What to tell us when you ask for a quote:

  • Any access issues, like height or stairs
  • Any previous sealing or DIY work
  • Photos by email, if that’s easy
  • What’s wrong with the joints now

There’s no standard price list. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or email us.

What remedial sealant looks like in Peters Village

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.

Schools such as Halling Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. Letting a property close to Snodland station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.

Peters Village is about 3 miles west of Chatham, in Medway. Jobs in Peters Village get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Peters Village is one of 68 places in Medway where we work for remedial sealant. For nearby work, see our London page.

Work in ME1 is quoted and booked the same way as anywhere else. Local streets include Greystone Square, Burners Walk and Tusk Walk, and we cover them all. Neighbouring places we cover for remedial sealant include Scarborough (1 mile east), Wouldham (1 mile north), Holborough (1 mile west), Burham (1 mile south-east) and Halling (1 mile north-west). Further out, we also cover Gillingham (5 miles north-east), Chatham (3 miles east), Rochester (4 miles north-east), Rainham (6 miles east), Strood (4 miles north) and Luton (4 miles north-east).

What’s near Peters Village

Typical jobs here are in homes near The Five Bells pub, Holborough Marshes and The Holmesdale School. The nearest railway station is Snodland station, roughly 1 mile south-west. Well-known places in the area include Medway megaliths (2.3 miles south-east) and Pentagon Shopping Centre (4 miles north-east). For a walk, there’s Burham Down and Blue Bell Hill.

Map of Peters Village © OpenStreetMap contributors

The process

Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for a typical bath or shower, longer where several layers have been applied. Parking around Peters Village is normally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.

  1. We protect the surfaces around the joint.
  2. Every layer of failed sealant is stripped out.
  3. We clean and degrease the joint and look for signs of movement or water.
  4. New sealant goes in once the joint is dry, and is tooled smooth.
  5. We give you the cure time and explain what caused the failure.

How to prepare

  • Clear items away from the joints we are working on
  • Let us know about parking restrictions
  • Plan for the work area to be out of bounds to pets and children

How to get a quote

For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work and send you a clear quote.

Get a quick quote

Related advice

Why act early in Peters Village

Mould under a bead can’t be reached by cleaning. Removal is the only way to get at it, and the joint treated and dried before resealing. In an older home around Peters Village, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.

A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.

Why book with us

  • Homes, businesses and hotels
  • A choice of colours where the product allows
  • Rated 4.9 stars on Google
  • We are fully insured

Read what affects the cost and what customers say.

Your questions about remedial sealant in Peters Village

Do you cover smaller places like Peters Village?

Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.

Is Peters Village in your area for remedial sealant?

Yes. We work across London and the South East, and Peters Village is part of that. You can ring 0345 464 0079 or email us and tell us what needs doing.

How long will it take to strip and reseal the joint?

Longer than a simple reseal, because every layer has to come out. For most joints, it’s a few hours, and we confirm the time with your quote.

Does remedial work come with a guarantee?

Yes. Every job comes with our 12-month guarantee.

Where is Mr Mastic based?

Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.

Do you remove the old sealant?

Yes. We cut out all the old sealant and clean the joint before applying anything new.

Someone resealed my shower and it’s leaking again. Can you help?

Yes. We check it’s the sealant and not the tray, valve or waste, then strip and reseal the joints.

Someone sealed over the old bead. Can you fix it?

Yes. We cut out all the layers and clean off the film, then the joint is resealed once.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job