Kent · England
Remedial Sealant in Holborough
Removing failed, mouldy or leaking sealant and putting it right for Holborough, backed by a one-year guarantee. Ask us for a quote.
- A shower that leaks however often it’s resealed
- Worktop sealant that has shrunk and split
- Floor or wall movement joints that have failed
How we handle remedial sealant in Holborough
The wrong product in the wrong joint will not last, however tidy it looks. We take it out and use a sealant made for that joint. Typical jobs include over-sealed joints coming away and wide, uneven beads that look worse than the old ones, on mouldy bath & shower sealant, leaking tray & enclosure joints and expansion joints.
Homes around Holborough range from older cottages to more recent houses. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
All of our work is guaranteed for twelve months, in Holborough and everywhere else we cover.
- Location
- Holborough (ME6, ME1, ME19)
- Region
- Kent
- Cover
- A year, on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
How to look after the new joints
A little care helps the new joints last. We recommend:
- Keep movement joints clear of mortar and paint
- Run the fan after every shower
- Act on a lifting corner straight away
- Never seal over old silicone
Give the new sealant its full cure time: follow the cure time we give you.
Warning signs: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Each one is worth getting looked at.
What the job involves on each surface
Leaking trays & enclosures
Repeat shower leaks often come from a tray that flexes or an enclosure sealed in the wrong place. We check both before we reseal.
Movement & expansion joints
Joints filled with mortar, grout or rigid filler cannot move. We rake that out where it can be removed and seal with a flexible product.
Common problems we fix in Holborough
Water from somewhere else can ruin a good seal. A leaking valve, a failed waste or cracked grout feeds water behind the bead, and the sealant lifts or goes mouldy from underneath.
These are the problems we’re asked about most:
- Over-sealed joints coming away
- Decorators’ caulk around a bath or shower
- Black mould underneath the bead
- Sealant peeling off a dusty or damp surface
Homes close to Church of the New Jerusalem include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Comparing quotes
- Whether they’re fully insured
- Who turns up on the day
- What preparation is included
- How the colour is chosen
What happens on the day
On the day, we look over the joints with you first. Surfaces next to the work are protected before any work starts. The work generally takes a few hours, depending on how many layers have to come out. In a smaller place like Holborough, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We start by checking the joint for movement, leaks and the reason it failed.
- All the old sealant comes out, including any layers underneath.
- We clean the joint, treat any mould and let it dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- Let us know if you’ve seen damp or leaks
- For business premises, tell us about site rules or sign-in
Get a quote
There’s no standard price list, because every job is different. Instead, we give you a clear quote for your job. To get started, call 0345 464 0079 or email us.
Read more
Quotes for remedial sealant in Holborough
Some jobs are bigger than they look, and some smaller. The main factors:
- Working hours on commercial sites
- How many rooms, windows or areas are involved
- How much old sealant there is and how hard it is to remove
- How easy the joints are to reach
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before we start, so you know where you stand.
What to tell us for a quote
What to tell us when you ask for a quote:
- Where the property is
- Whether it has been sealed before
- What’s wrong with the joints now
- The type of property
If you’re in Holborough and need remedial sealant, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before work begins.
Common questions in Holborough
Is Holborough in your area for remedial sealant?
Yes. We work across London and the South East, and Holborough is part of that. You can call 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll give you a clear quote.
Do you cover smaller places like Holborough?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can I choose the sealant colour?
Most of the time, yes. We will explain which colours are available and agree one before any work starts.
Is there any odour?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
Someone sealed over the old bead. Can you fix it?
Yes. We cut out all the layers and clean off the film, before resealing with a single bead.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We will tell you what we are using and why.
How long before the joint can be used?
That depends on the sealant used, so please follow the time we give you when we finish.
Can you reseal a split movement joint?
Yes. Where mortar or filler has been used instead of sealant, it’s removed where it can be, then the joint is sealed properly.
What remedial sealant looks like in Holborough
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
If you look after a building such as Valley Invicta Primary School at Holborough Lakes, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Letting a property close to Snodland station? Then a joint that keeps failing is best fixed properly while the property is empty.
Holborough is about 4 miles west of Chatham, in Kent. Whether you’re in the middle of Holborough or further out, remedial sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Our Kent coverage runs to 922 places, and Holborough is one of them. Our London page covers work nearby, about 26 miles away.
Jobs for remedial sealant in ME6, ME1 and ME19 works the same way as everywhere else we cover. That includes homes and businesses on Lee Road, Byrne Road and Ladds Lane. Neighbouring places we cover for remedial sealant include Snodland (1 mile south-west), Peters Village (1 mile east), Scarborough (1 mile east), Upper Halling (1 mile north-west) and Wouldham (1 mile north-east). Larger places within reach include Maidstone (6 miles south-east), Sittingbourne (13 miles east), Dartford (12 miles north-west), Sevenoaks (12 miles west), Gravesend (7 miles north-west) and Tonbridge (12 miles south-west).
Around Holborough
In Holborough, that means homes and buildings near The Monks Head pub, Holborough Marshes and The Holmesdale School and the streets around them. Holborough’s nearest station is Snodland station, roughly 0.5 miles south. A little further out are St. Catherine's Hospital (4.2 miles north-east) and Leybourne Castle (2.5 miles south-west). For a walk, there’s Blue Bell Hill and Burham Down.
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Towns and villages near Holborough
More services for Holborough
Leave it or put it right?
Another bead over the top will not fix a failed joint. It can’t bond to what’s underneath, leaving the leak in place and one more layer to cut out later. Around Holborough, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
Why us?
- More than 20 years in sealant work
- We never seal over old sealant
- One-year guarantee on every job
- An ARBOMaster approved applicator
Take a look at our cost guide or what customers say.