Medway · England
Remedial Sealant in Wouldham
We cover Wouldham for removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Mould trapped under a layer of silicone
- Sealant applied over old sealant that has lifted
- Repeat leaks from the same joint
Different surfaces, different methods
Leaking trays & enclosures
If the tray is cracked, or the leak is from the valve or waste, sealant will not fix it. We say so rather than reseal.
Worktops & kitchens
Kitchen joints often have grease and cleaning residue deep in them, so we spend extra time cleaning.
Remedial sealant in Wouldham, done properly
If a joint fails again and again, something is causing it. A tray that moves, a worktop that isn’t fixed, the wrong sealant or water getting in elsewhere will beat any new bead. We look for the cause before we reseal. Typical jobs include black mould underneath the bead and caulk or the wrong sealant used in a wet area, across shrunken worktop sealant, leaking tray & enclosure joints and botched or over-sealed joints.
In a village or hamlet like Wouldham, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Each job carries a 12-month guarantee.
- Location
- Wouldham (ME1)
- Region
- Medway
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Towns and villages near Wouldham
What else we do in Wouldham
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Deal with small splits early
- Don’t add new sealant on top of old
- Run the fan after every shower
- Report a tray that rocks or a worktop that lifts
Go easy on the new sealant: a mild cleaner and a soft cloth, with no blades or scourers.
Movement joints that have split let water into the structure, and the longer it’s left, the more the joint edges break down. Resealing while the edges are sound is simpler.
When to call us in Wouldham
Using the wrong product is a common cause: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. None of them last.
Most people get in touch after spotting something like this:
- Products that weren’t meant for the joint
- Smears and lumps from a botched reseal
- Sealant applied over old sealant that has lifted
- A shower that leaks however often it’s resealed
In the older streets around Church of All Saints, walls and floors in older homes can move, and sealant and grout show it first.
Before booking anyone
- Which sealant they’ll use, and why
- What happens if the job turns out different
- Which colour the sealant will be
- Whether VAT is included
Why deal with it now?
It’s easy to scratch acrylic, enamel or an uPVC frame cutting out old sealant, and the residue left behind stops the next bead bonding. Careful stripping is where most of our time goes. Where a wall is exposed, as many are in small places like Wouldham, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, call 0345 464 0079 or email us for an honest opinion and a quote.
Why choose Mr Mastic in Wouldham
- Rated 4.9 stars on Google
- Arbo and Everbuild products
- You choose the colour before work begins
- Domestic, commercial and hotel work
Read our cost guide or customer reviews.
Remedial sealant around Wouldham
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Halling station, botched sealant from a previous quick fix is easier to strip out between tenants. Schools such as Halling Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Wouldham is about 3 miles west of Chatham, in Medway. For remedial sealant in and around Wouldham, please call 0345 464 0079 or drop us an email for a quick quote. We cover Medway from our Crawley base, Wouldham included. Wouldham is one of 68 towns and villages in Medway we cover. Our London page covers work nearby.
We cover every part of ME1 for remedial sealant and the streets around it. We cover properties on High Street, Oldfield Drive and Meadow Way and the roads around them. We also cover Peters Village (1 mile south), Halling (1 mile west), Scarborough (1 mile south-east), Holborough (1 mile south-west) and North Halling (1 mile north-west). We also work in nearby towns such as Gillingham (5 miles east), Chatham (3 miles east), Rochester (3 miles north-east), Rainham (6 miles east), Strood (3 miles north) and Luton (4 miles east).
Local landmarks in Wouldham
We work in homes and buildings around Holborough Marshes, The Five Bells pub and The Thomas Aveling School and the streets around them. The nearest railway station is Halling station, roughly 0.6 miles west of the centre. Well-known places in the area include Rochester Castle (3.3 miles north-east) and Pentagon Shopping Centre (3.6 miles north-east). Not far away are Blue Bell Hill and Burham Down.
The process
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours, depending on how many layers have to come out. For a village or hamlet like Wouldham, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you are told about anything else we found.
Getting ready for the visit
- Move anything stored near the joints
- Mention if the joints have been sealed before
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or drop us an email.
Advice
Landlord and commercial work in Wouldham
We also work for property managers and facilities teams. We can quote a run of properties together, and we’re fully insured for the work.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Questions from Wouldham
I let a flat near Halling station. Can you help?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear quote.
Do you cover Wouldham for remedial sealant?
Yes. We work across London and the South East, and Wouldham is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Can old silicone be taken off without scratching the tiles?
Yes. The old bead is cut and lifted with tools that suit the surface, then clean off the residue. Any existing damage is pointed out before work begins.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will tell you what we are using.
Are you ARBOMaster approved?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Do you offer different sealant colours?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
What information do you need?
Tell us what needs doing and where, with pictures by email if possible. We will ask anything else we need to know.
Can you take off two layers of silicone?
Yes. It’s slower than a standard reseal, because every layer has to come out cleanly, but it’s the only way the new joint will last.