Kent · England

Remedial sealant & repairs in Patrixbourne, Kent

Our applicators work in Patrixbourne on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.

  • Worktop sealant that has shrunk and split
  • A second bead peeling off the first
  • Dark patches showing through the sealant

Remedial sealant for Patrixbourne homes and businesses

Signs you need remedial sealant in Patrixbourne

Joint depth matters. Sealant packed too deep, or stuck to the back of the joint as well as the sides, can’t stretch, so it tears when the joint moves. Backing rod or bond-breaker tape prevents it.

If you can see any of these, it’s time to have the joints looked at:

  • Wide, uneven beads that look worse than the old ones
  • Mould trapped under a layer of silicone
  • Leaks that keep coming back after resealing
  • Torn expansion joints

Managing a site like Bridge and Patrixbourne Church of England Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

What your quote should include

  • What the quote includes, VAT included or not
  • When the joint can take water or movement
  • Are they insured?
  • Whether they seal over old material or remove it

How to choose a mastic man

Remedial sealant in Patrixbourne

In Patrixbourne, as anywhere, remedial jobs tend to look alike: over-sealed joints, hidden mould, repeat leaks and split movement joints. Each is stripped back and done again properly. If you have mould trapped under a layer of silicone and repeat leaks from the same joint, we can put it right.

For a small place like Patrixbourne, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.

The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.

Location
Patrixbourne (CT4)
Region
Kent
Cover
12 months on all our work
Quotes
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator smiling as he applies silicone to the corner of a bath

Patrixbourne homes and their sealant

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

If you live in an older home near Church of St Mary, walls and floors in older homes can move, and sealant and grout show it first. Letting a property close to Bekesbourne station? Then a joint that keeps failing is best fixed properly while the property is empty.

Patrixbourne is about 3 miles south-east of Canterbury, in Kent. Whether you are in the middle of Patrixbourne or further out, remedial sealant is available for homes and businesses alike, from flats and houses to offices and hotels. 922 places in Kent are on our list, from the larger towns to small villages. We also work in Chelmsford, around 44 miles away.

Jobs for remedial sealant in CT4 works the same way as everywhere else we cover. Whether your property is on The Street, Station Road and St Mary's Road or a nearby road, we can help. If you’re just outside Patrixbourne, we cover Bekesbourne Hill (1 mile north), Bekesbourne (1 mile east), Bridge (1 mile south-west), Bishopsbourne (2 miles south) and Littlebourne (2 miles north-east). Larger places within reach include Ashford (14 miles south-west), Canterbury (3 miles north-west), Margate (14 miles north-east), Dover (11 miles south-east), Folkestone (12 miles south) and Ramsgate (13 miles north-east).

Around Patrixbourne

In Patrixbourne, that means homes and buildings near The Bridge Arms and St. Anselm's Catholic School. The closest station to Patrixbourne is Bekesbourne station, roughly 0.5 miles north of the centre. Other landmarks nearby include Canterbury Roman Museum (2.9 miles north-west) and Canterbury Castle (3 miles north-west). Open spaces near Patrixbourne include Blean Woods RSPB Reserve.

Map of Patrixbourne © OpenStreetMap contributors

What the job involves on each surface

Over-sealed & botched joints

Every layer has to come out, and silicone residue is cleaned off the tiles too. Only a clean joint will take a new bead.

Windows & doors

A frame that keeps leaking may not be the mastic. We check the joint and tell you if it looks to be something else.

How it works

A visit follows a simple pattern: we check the joints, protect the area around them, do the work and tidy away. It generally takes a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere as small as Patrixbourne, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. Surrounding tiles, trays and frames are protected first.
  2. Every layer of failed sealant is stripped out.
  3. The joint is degreased and checked for movement and leaks.
  4. Once dry, a suitable sealant is applied and tooled.
  5. You get the cure time and our view on why the joint failed.

Preparing for the visit

  • Move anything stored near the joints
  • Plan for the work area to be out of bounds to pets and children
  • Where the joints are inside, avoid wetting them before we arrive

Getting a quote

Getting a quote is simple: let us know the job and the location and its rough size. A few pictures by email make the job easier to understand, and we will come back to you with a quote.

Get a price

Advice

What sealant work cannot fix

A few problems are outside what sealant work can do:

  • A bath, tray or worktop that moves until it’s properly fixed
  • A tray or bath that is cracked
  • Older mastics that may need an asbestos check before removal

Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly.

Where we work in Patrixbourne

  • Mouldy bath & shower sealant
  • Expansion joints
  • Failed movement joints
  • Shrunken worktop sealant
  • Botched or over-sealed joints
  • Leaking tray & enclosure joints

How we quote for remedial sealant

We quote each job individually. This is what makes a difference:

  • Whether there’s mould to deal with
  • The old material and how stubborn it is
  • When we can work, for business premises
  • The size of the job

The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before work begins.

Helping us quote

To make quoting easier, let us know:

  • Pictures of the joints, sent by email
  • Where the job is, and your postcode
  • The rough size of the job
  • What’s wrong with the joints now

We quote each job on its own, so the first step is telling us about yours. Simply ring 0345 464 0079 or send us an email and describe the job, and pictures are welcome.

Can I do it myself?

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.

Looking after it afterwards

How long the joints last depends on use and care. Here’s what we suggest:

  • Ask why a joint failed before redoing it
  • Air the bathroom so the sealant can dry
  • Check trays and worktops don’t move
  • Keep bleach and abrasives off the bead

Keep an eye on the joint at first, particularly where the original failure was caused by movement. Should anything change, ring 0345 464 0079 or email us.

A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. Resealing while the edges are sound is simpler.

Patrixbourne questions

Do you cover Patrixbourne for remedial sealant?

Yes, Patrixbourne is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or email us with a few details of the job.

Will you come out to Patrixbourne?

Yes. Patrixbourne is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Should I try DIY first?

Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Do you fix expansion and movement joints?

Yes. If a joint has been filled with mortar or rigid filler, we rake it out where possible, then the joint is sealed properly.

Is there any odour?

There can be a smell while the sealant cures, but it fades. Opening a window helps.

What information do you need?

Tell us what needs doing and where. If we need more, we will ask.

Can you do several jobs on one visit?

Yes. Several rooms, windows or areas can go on one quote.

Does remedial work come with a guarantee?

Yes, with our one-year guarantee. If we’ve pointed out another problem, getting it fixed helps the new joint last.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job