Kent · England
Remedial Sealant in Bekesbourne
Remedial sealant across Bekesbourne and nearby, with every bit of old sealant taken out first.
- Worktop sealant that has shrunk and split
- Repeat leaks from the same joint
- A second bead peeling off the first
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Remedial sealant for homes and businesses in Bekesbourne
Decorators’ caulk in a shower, bathroom silicone on a window, a rigid filler in a movement joint fails however neatly it’s applied. We take it out and use a sealant made for that joint. We work on failed movement joints, leaking tray & enclosure joints and mouldy bath & shower sealant, and the jobs we see most are caulk or the wrong sealant used in a wet area and thick, messy sealant smeared over tiles.
For a small place like Bekesbourne, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Bekesbourne (CT4)
- Wider area
- Kent
- Cover
- A year, on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Places near Bekesbourne
What else we do in Bekesbourne
Questions from Bekesbourne
Can you do remedial sealant in Bekesbourne?
Yes, Bekesbourne is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or email us with a few details of the job, and we will give you a clear price.
Do you cover smaller places like Bekesbourne?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Where are you based?
Mr Mastic is based in Crawley. We cover Bekesbourne and the rest of Kent, along with the rest of our area.
Are you fully insured?
Yes. Full insurance covers our work.
Will it make a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
My shower still leaks after a reseal. Can you sort it?
Yes. First we check whether the leak is the sealant at all, then the joints are stripped and resealed.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Do you work for hotels and businesses?
Yes. Larger jobs can be planned room by room or area by area.
What affects the cost of remedial sealant
The quote reflects the job in front of us. We take into account:
- How much there is to do
- When we can work, for business premises
- How much old sealant there is and how hard it is to remove
- Whether the work is at height
Every job is a little different, so we quote each one individually. Size, access and the product the joint needs all play a part.
What to tell us for a quote
To make quoting easier, please include:
- Access, such as stairs, a lift or height
- Photos by email, if that is easy
- The type of property
- Where the property is
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
When it isn’t the sealant
Before you book, it’s worth knowing the limits too:
- A tray or bath that’s cracked
- Tiles that have come away from the wall
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think.
Surfaces we seal
- Expansion joints
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Failed movement joints
- Botched or over-sealed joints
How the visit works
On the day, there’s very little for you to do. Show us the job and we will take it from there. The work itself takes a few hours, depending on how many layers have to come out. Somewhere as small as Bekesbourne, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Before we arrive
- Mention any sign-in or site rules at work premises
- Tell us about any water getting in
- Mention any tricky access
Getting a quote
Need a quote? Please ring 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Read more
Landlords, agents and businesses in Bekesbourne
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will quote.
For anyone letting property in or around Bekesbourne, several properties can be quoted together. Send us the addresses and the work at each.
Remedial sealant around Bekesbourne
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Church of St Peter, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For site and facilities teams at buildings such as St. Anselm's Catholic School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Bekesbourne is about 3 miles south-east of Canterbury, in Kent. Whether you are in the middle of Bekesbourne or further out, remedial sealant is available for homes and businesses alike. Bekesbourne is one of 922 towns and villages in Kent where we work for remedial sealant. Our Chelmsford page covers work nearby.
All of CT4 is within our area for remedial sealant, from the main roads to the quietest streets. We cover properties on Aerodrome Road, Lysander Close and Adisham Road and the roads around them. If you are just outside Bekesbourne, we cover Patrixbourne (1 mile west), Bekesbourne Hill (1 mile north-west), Bridge (1 mile south-west), Littlebourne (2 miles north) and Adisham (2 miles south-east). Larger places within reach include Ashford (15 miles south-west), Canterbury (3 miles north-west), Margate (13 miles north-east), Dover (10 miles south-east), Folkestone (12 miles south) and Ramsgate (13 miles north-east).
Local landmarks in Bekesbourne
The nearest railway station is Bekesbourne station, about 0.8 miles north-west of the centre. A little further out are Whitefriars Shopping Centre (3.5 miles north-west) and St Martins Hospital (2.5 miles north-west).
Signs you need remedial sealant in Bekesbourne
All sealant wears out eventually. Mould grows into the silicone, the surface hardens and the bead shrinks. Then the only fix is removal and a new bead.
These are the problems we’re asked about most:
- Kitchen joints letting water behind the worktop
- Black mould underneath the bead
- A shower that leaks however often it’s resealed
- Sealant peeling off a dusty or damp surface
Rented homes near Bekesbourne station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Questions to ask before you book
- Whether the sealant suits the joint
- Is VAT in the price?
- Whether they’re fully insured
- Whether you can choose the colour
How to look after the new joints
After the cure time, these simple habits help:
- Clean sealant with mild products only
- Look for stains below bathrooms now and then
- Ask why a joint failed before redoing it
- Keep movement joints clear of mortar and paint
Keep the room ventilated: run the fan during and after showers, or open a window.
If a joint has failed more than once, stop resealing it. Get the cause found first, otherwise the next attempt will fail too.