Kent · England
Remedial sealant & repairs in Bekesbourne Hill, Kent
Professional remedial sealant in and around Bekesbourne Hill, with every bit of old sealant taken out first and a one-year guarantee.
- Gaps opening along the back of the worktop
- Black mould underneath the bead
- Repeat leaks from the same joint
How we handle remedial sealant in Bekesbourne Hill
In Bekesbourne Hill, as anywhere, remedial jobs tend to look alike: over-sealed joints, hidden mould, repeat leaks and split movement joints. Each is stripped back and done again properly. If you are dealing with a second bead peeling off the first and movement joints that have split or pulled away, we can put it right, on mouldy bath & shower sealant, leaking tray & enclosure joints and failed movement joints alike.
Somewhere as small as Bekesbourne Hill, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Bekesbourne Hill (CT4)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Bekesbourne Hill homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Bekesbourne station? Then a joint that keeps failing is best fixed properly while the property is empty. Schools such as Bridge and Patrixbourne Church of England Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. In the older streets around Church of St Peter, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Bekesbourne Hill is about 3 miles south-east of Canterbury, in Kent. From the centre of Bekesbourne Hill to the outskirts, remedial sealant is available for homes and businesses alike. Our area takes in 922 places across Kent, from the larger towns to small villages. For nearby work, see our Chelmsford page, about 43 miles away.
Jobs for remedial sealant in CT4 works the same way as everywhere else we cover. Streets in the area include Bekesbourne Hill and Oakleigh Lane. We also cover the places around Bekesbourne Hill: Patrixbourne (1 mile south), Bekesbourne (1 mile south-east), Bridge (1 mile south-west), Littlebourne (2 miles north-east) and Bishopsbourne (2 miles south). Within a short drive, we also cover Ashford (14 miles south-west), Canterbury (3 miles north-west), Margate (13 miles north-east), Dover (11 miles south-east), Folkestone (12 miles south) and Ramsgate (13 miles north-east).
Near you in Bekesbourne Hill
In Bekesbourne Hill, that means homes and buildings near Chequer's Wood and Old Park and St. Anselm's Catholic School and the streets around them. Bekesbourne Hill has its own railway station: Bekesbourne station. Well-known places in the area include Canterbury Roman Museum (2.6 miles north-west) and St Martins Hospital (1.6 miles north-west). The countryside around Bekesbourne Hill includes Blean Woods RSPB Reserve.
Questions from Bekesbourne Hill
Do you cover smaller places like Bekesbourne Hill?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you help a landlord with a rental near Bekesbourne station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.
Are you an approved applicator?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
How long should I leave it?
Most sealants are touch-dry well before they’re fully cured. We will give you the cure time for the product we used before we leave.
Do you offer different sealant colours?
Normally, yes. White, clear and grey are common, and other colours are available for many products, and we’ll agree it with you first.
Can you remove sealant that’s been put over old sealant?
Yes. It’s slower than a standard reseal, because every layer has to come out cleanly, but it’s what makes the new bead last.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Does remedial work come with a guarantee?
Yes. Our one-year guarantee covers the work, and we’re ARBOMaster approved.
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too in Bekesbourne Hill and across Kent. We can quote a run of properties together, and we are fully insured for the work.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
How the job changes by surface
Movement & expansion joints
A sealant stuck to the back of the joint can’t stretch. Backing stops that, letting the sealant flex between the two faces.
Windows & doors
Wrong-coloured or messy mastic can be replaced for appearance too, matched to the frame colour.
Why deal with it now?
Ripping out a bathroom isn’t normally needed. If the bath, tray and tiles are sound, remedial resealing usually puts it right. Where something else has failed, you will hear it from us. Older cottages and farmhouses around Bekesbourne Hill can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
What you get with us
- Anti-fungal sanitary silicone in wet areas
- Any old sealant cut out fully, not covered over
- An ARBOMaster approved applicator
- Neat joints and a tidy finish
What we cannot put right
New sealant can’t fix everything, and we’d rather say so up front. Sealant won’t put right:
- A tray or worktop that needs refixing first
- A leaking trap, valve or supply pipe
- A tray or bath that’s cracked
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
What we seal
- Leaking tray & enclosure joints
- Expansion joints
- Botched or over-sealed joints
- Failed movement joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
What affects the cost of remedial sealant
For a quick quote, just ask. What matters most is:
- Whether the work is at height
- The type of sealant required
- Whether old sealant or filler has to be cut out
- When we can work, for business premises
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
Before you ask for a quote, have a think about:
- Access, such as stairs, a lift or height
- Whether it has been sealed before
- The address or postcode of the job
- What the problem is, such as mould, gaps, leaks or cracking
For a quote, phone 0345 464 0079 or send us an email with the location and a short description of the problem. You’ll have a clear quote before any work starts.
Also near Bekesbourne Hill
What else we do in Bekesbourne Hill
How the visit works
All our tools and materials come with us in the van. After a quick look at the joints together, we protect the area and start. It normally takes a few hours, depending on how many layers have to come out. Somewhere as small as Bekesbourne Hill, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- We finish neatly and point out anything that needs another trade.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Clear the area around the work
- Keep pets and children clear of the area while we work
Get a quote
Every job is quoted individually, so the first step is telling us about yours. Just ring 0345 464 0079 or email us with the details and send pictures if you have them.
Related advice
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.