Kent · England
Remedial Sealant in Littlebourne
We cover Littlebourne for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Worktop sealant that has shrunk and split
- Products that weren’t meant for the joint
- A shower that leaks however often it’s resealed
About our remedial sealant in Littlebourne
Not every leak is a sealant leak. A cracked tray, a failed shower valve or a leaking waste can look just the same. When the fault is elsewhere, we say so instead of resealing for the sake of it. If you have sealant that came away because the surface wasn’t prepared and mould trapped under a layer of silicone, we can help, on failed movement joints, mouldy bath & shower sealant and leaking tray & enclosure joints alike.
For a small place like Littlebourne, remedial sealant is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
Every job comes with a 12-month guarantee, wherever you are in Kent.
- Where
- Littlebourne (CT3)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quotes
- A clear price before we start
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Why act early in Littlebourne
Hidden water does the most damage: soaked floorboards, ceiling stains below and blown plaster. Dealing with the joint now is a small job by comparison. Around Littlebourne, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or email us.
Why book with us
- White, clear, grey or another colour, product permitting
- Homes, businesses and hotels
- Anti-fungal sanitary silicone in wet areas
- ARBOMaster approved applicator
Read our cost guide or our reviews.
Common questions in Littlebourne
Will you come out to Littlebourne?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Bekesbourne station?
Yes. We work for landlords and agents as well as homeowners, and several properties can go on one quote. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear price.
What information do you need?
The location, the problem and the rough size of the job. Photos by email help too.
Can failed expansion joints be resealed?
Yes. We cut out the failed sealant, fit backing and reseal with a flexible product.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
How long should I leave it?
Cure times vary by product. Before we leave, we will tell you the cure time.
Is it messy?
No. We protect the surfaces around the joints, and we tidy up before we go.
Can I choose the sealant colour?
In most cases you can choose. We will explain which colours are available.
Littlebourne homes and their sealant
There are hotels and other places to stay in and around Littlebourne. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Managing a site like Littlebourne Church of England Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. In the older streets around Church of St Vincent, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Letting a property close to Bekesbourne station? Then a joint that keeps failing is best fixed properly while the property is empty.
Littlebourne is about 4 miles east of Canterbury, in Kent. Homes, rented property, offices and hotels in Littlebourne can book us for remedial sealant. Every job comes with our 12-month guarantee. Our Kent coverage runs to 922 places, Littlebourne among them. There’s also a page for Chelmsford, about 43 miles away.
Jobs for remedial sealant in CT3 works the same way as everywhere else we cover. Local streets include Church Road, High Street and Jubilee Road, and we cover them all. We also cover Ickham (1 mile east), Wickhambreaux (1 mile north-east), Seaton (1 mile north-east), Bramling (1 mile south-east) and Bekesbourne (2 miles south). Larger places within reach include Canterbury (4 miles west), Margate (12 miles north-east), Dover (11 miles south-east), Folkestone (13 miles south), Ramsgate (12 miles east) and Broadstairs (13 miles north-east).
Local landmarks in Littlebourne
In Littlebourne, that means homes and buildings near The Basket Makers pub, among other places. For rail, the closest station is Bekesbourne station, roughly 1.5 miles south-west. Nearby you will also find Canterbury Castle (3.9 miles west) and Canterbury Roman Museum (3.6 miles west). For a walk, there’s West Blean and Thornden Woods.
How to look after the new joints
To keep the joints looking good and working properly:
- Deal with small splits early
- Air the bathroom so the sealant can dry
- Don’t point over movement joints
- Ask why a joint failed before redoing it
Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.
Mould trapped under over-sealed joints spreads unseen. By the time it shows through, the joint is well past saving.
Places near Littlebourne
More services for Littlebourne
The process
Good joint work is mostly preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere like Littlebourne needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- The right product goes in, with backing where the joint moves.
- The joint is tooled and you are told about anything else we found.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Clear the area around the work
- Keep children and pets away from the work area
Get a quote
There’s no standard price list, because every job is different. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or send us an email.
Read more
Quotes for remedial sealant in Littlebourne
Jobs vary more than people expect. What affects the quote:
- Any mould that needs treating
- How much old sealant there is and how hard it is to remove
- The number of rooms or windows
- How much there is to do
Doing several joints on one visit generally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We will send you a clear quote for the lot.
What we need to know
To help us quote quickly, please include:
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
- How we’d reach the joints
- The rough size of the job
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
For anyone letting property in or around Littlebourne, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and photos by email help.
Honest limits
It helps to know what we cannot do too:
- Plumbing leaks behind walls or under trays
- Sealant in an older building that needs testing for asbestos first
- Water damage behind tiles that needs a tiler
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think before booking.
What we seal
- Botched or over-sealed joints
- Expansion joints
- Failed movement joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Shrunken worktop sealant
How the job changes by surface
Windows & doors
Failed frame mastic is often hard, cracked and in several layers. All of it is cut out and the frame and wall cleaned before backing and resealing.
Leaking trays & enclosures
When failed joints are the cause, they’re all cut out and renewed, including the screen profile and tray edges.