Hampshire · England
Remedial Sealant in Hordle
Failed sealant joints in Hordle need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Repeat leaks from the same joint
- Movement joints that have split or pulled away
- Decorators’ caulk around a bath or shower
Hordle homes and their sealant
Hordle is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Church of All Saints, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Rented homes near New Milton station change hands often, and a joint that keeps failing is best fixed properly while the property is empty. Managing a site like Hordle CofE (VA) Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Hordle is about 3 miles west of Lymington, in Hampshire. Homes, rented property, offices and hotels in Hordle is covered for remedial sealant, old or new, large or small. The work is guaranteed for a year. We cover 683 towns and villages across Hampshire, large and small. You can also see our page for Southampton, about 15 miles away.
Jobs for remedial sealant in SO41 is quoted and booked the same way as anywhere else. Remedial sealant is available to properties on Yerville Gardens, Acacia Road and Woodlands and the roads around them. We also cover the places around Hordle: Downton (1 mile south), Leagreen (1 mile south), Ashley (1 mile west), Tiptoe (2 miles north) and New Milton (2 miles west). Further out, we also cover Totton (12 miles north-east), Lymington (3 miles east), Hythe (12 miles north-east), Ringwood (9 miles north-west), Dibden Purlieu (11 miles north-east) and Marchwood (12 miles north-east).
Around Hordle
Around Hordle, our work takes us to homes and buildings near The Arnewood School and the streets around them. For rail, the closest station is New Milton station, roughly 1.7 miles west of the centre. Other landmarks nearby include Sammy Miller Motorcycle Museum (2.4 miles west) and Highcliffe Castle (4.4 miles west). The countryside around Hordle includes Milford on Sea LNR.
Remedial sealant in Hordle
A joint that keeps letting you down needs more than another bead. Send photos when you phone 0345 464 0079 or email us, along with when it was last resealed. If you are dealing with gaps opening along the back of the worktop and dark patches showing through the sealant, we can help, on failed movement joints, shrunken worktop sealant and botched or over-sealed joints alike.
Homes around Hordle range from older cottages to more recent houses. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
There’s a 12-month guarantee on every job, whatever its size.
- Where
- Hordle (SO41)
- Region
- Hampshire
- Cover
- A year, on every job
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
When something else is needed
To be straight with you, some problems need a different trade:
- A leaking trap, valve or supply pipe
- A tray or bath that’s cracked
- Movement from fittings that are not supported
If in doubt, phone 0345 464 0079 or drop us an email and we will say what we think before booking.
What we seal
- Failed movement joints
- Expansion joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
- Shrunken worktop sealant
What affects the quote in Hordle
The quote reflects the job in front of us. We take into account:
- How many rooms, windows or areas are involved
- Whether old sealant or filler has to be cut out
- Access and height
- Any mould that needs treating
The cost depends on how much there is to do, how much old material has to come out and access to the work. We give a clear quote before work begins, so you know where you stand.
Helping us quote
When you call or email, it’s useful to know:
- How many joints, rooms or windows are involved
- How we’d reach the joints
- Where the job is, and your postcode
- Whether it has been sealed before
For a quote, phone 0345 464 0079 or send us an email with the location and a short description of the problem. You will have a clear quote before any work starts.
How the visit works
When we get to you, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. Most jobs then take a few hours, depending on how many layers have to come out. In a smaller place like Hordle, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any sign-in or site rules at work premises
- Keep children and pets away from the work area
Ask for a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work and send you a clear quote.
Read more
Looking after it afterwards
A little care helps the new joints last. Our advice:
- Don’t point over movement joints
- Keep the room well ventilated
- Get the cause of a repeat leak found before resealing
- Check trays and worktops do not move
Go easy on the new sealant: a mild cleaner and a soft cloth, with no blades or scourers.
A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can be quoted together.
FAQs for Hordle
Is Hordle within the area you cover?
Yes. Hordle is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near New Milton station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or email us and tell us about the property, and we will send you a clear quote.
Does remedial work come with a guarantee?
Yes, with our one-year guarantee. If we’ve pointed out another problem, getting it fixed helps the new joint last.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little.
My shower still leaks after a reseal. Can you sort it?
Yes, generally. We check it’s the sealant and not the tray, valve or waste, then strip and reseal the joints.
Can you take off two layers of silicone?
Yes. Each layer is cut out and the residue cleaned off, then the joint is resealed once.
Can you remove old sealant without damaging the bath?
Yes. Residue is removed with a product suited to the surface rather than scraped hard, so the new sealant bonds cleanly.
Do you offer different sealant colours?
Generally, yes. Sealants come in white, clear, grey and other colours for many products, and we will agree it with you first.
What happens if it’s left?
Mould under a bead can’t be reached by cleaning. The layers have to come out, and the joint treated and dried before resealing. In an older home around Hordle, damp from a failed joint can get into timber and plaster, and that is a much bigger job than renewing the sealant.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are not sure whether it needs doing, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
Why Hordle customers choose us
- We agree the colour with you first
- One-year guarantee on every job
- Quality sealants from Arbo and Everbuild
- Approved under the ARBOMaster scheme
See what affects the cost and our reviews.
Other services in Hordle
Should I try it myself first?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.