Hampshire · England
Gutter, fascia & soffit sealing in Hordle, Hampshire
Gutter and fascia joints in Hordle need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Damp on an inside wall under a dripping gutter
- Trim joints where the sealant has failed
- Garage door frames letting rain in
Work for landlords, hotels and businesses
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
If you manage several properties in or around Hordle, jobs at different addresses can be quoted together. Send us the addresses and the work at each.
Gutter sealing in Hordle, done properly
Open fascia and soffit joints spoil the roofline and can let weather in. They’re sealed in a matching colour where possible. Common call-outs are for open joints in fascias and soffits and old sealant on roofline trims that has split, on soffit joints, roofline trims and garage door frames.
In a smaller place like Hordle, some homes face open ground, and walls and rooflines facing the weather take the worst of it. Joints on those sides are normally the first to go.
We stand behind the work with a 12-month guarantee, so you’re not left on your own once the job is done.
- Where
- Hordle (SO41)
- Region
- Hampshire
- Cover
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Hordle buildings and the weather
Hordle is within about 2 miles of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. With historic houses such as Highcliffe Castle (about 4.4 miles west) nearby, there’s older building stock in the area around Hordle as well as newer homes. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.
Letting a property close to New Milton station? Then a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. In the older streets around Church of All Saints, the joints between older walls, newer extensions and the roofline need a sealant that can move. Schools such as Hordle CofE (VA) Primary School are buildings too, and its movement joints, gutters and trims need looking after like any other building’s.
Hordle is about 3 miles west of Lymington, in Hampshire. Jobs in Hordle get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Our area takes in 683 places across Hampshire. You can also see our page for Southampton, about 15 miles away.
All of SO41 is covered for gutter sealing. Streets in the area include Yerville Gardens, Acacia Road and Woodlands. Neighbouring places we cover for gutter sealing include Downton (1 mile south), Leagreen (1 mile south), Ashley (1 mile west), Tiptoe (2 miles north) and New Milton (2 miles west). We also work in nearby towns such as Totton (12 miles north-east), Lymington (3 miles east), Hythe (12 miles north-east), Ringwood (9 miles north-west), Dibden Purlieu (11 miles north-east) and Marchwood (12 miles north-east).
What’s near Hordle
In Hordle, that means homes and buildings near The Arnewood School. The closest station to Hordle is New Milton station, about 1.7 miles west. Other landmarks nearby include Sammy Miller Motorcycle Museum (2.4 miles west) and Highcliffe Castle (4.4 miles west). For a walk, there’s Milford on Sea LNR.
How to look after the new joints
Good habits help new joints last longer. A few tips:
- Keep downpipes clear
- Keep the gutters clear of debris
- Watch the wall under the gutters for staining
- Check the gutters during heavy rain
Keep downpipes clear so the gutter can drain. A blocked pipe backs water up to the joints.
Early sealing limits how much water hits the wall. If we find a bigger problem, we’ll tell you.
Why deal with it now?
Replacing guttering is a much bigger job than sealing joints. If the gutter is sound and the drip is a joint, resealing is the sensible fix. If it has failed, we will tell you. In a smaller place like Hordle, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we will go through it with you.
Why choose Mr Mastic in Hordle
- Colour picked to suit the job
- Full insurance on every job
- Homes, businesses and hotels
- We leave the area clean and tidy
What the job involves on each surface
Gutter end caps
End caps are resealed where they meet the gutter, after cleaning and drying.
uPVC fascias
Our work is the joints, not new fascias. Damaged boards need replacing by an installer.
What we do, step by step
Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes anything from an hour or two to a few hours and we leave things clean and tidy. Parking around Hordle is normally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- First we trace the drip and check the gutter is not damaged.
- The old sealant and dirt are cleaned out of the joint.
- We dry the joint so the new sealant can bond.
- A gutter sealant is applied to the joint.
- We check the run and clear debris near the joints.
How to prepare
- For business premises, tell us about site rules or sign-in
- Move anything stored near the joints
- Mention any tricky access
Get a quote
Want a quote for gutter sealing? Please call 0345 464 0079 or drop us an email with a few details. We will explain what we’d do and give you a clear price before work begins.
Read more
Also in Hordle
When it isn’t the sealant
Before you book, it’s worth knowing the limits:
- Sagging gutters or broken brackets
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- Blocked downpipes
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think.
Where we work in Hordle
- Gutter joints
- uPVC fascias
- Soffit joints
- Garage door frames
- Gutter end caps
- Roofline trims
Quotes for gutter sealing in Hordle
Your quote is based on your job. We look at:
- The number of rooms or windows
- The size of the job
- Mould in or behind the old joints
- When we can work, for business premises
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Helping us quote
To make quoting easier, let us know:
- Any previous sealing or DIY work
- How we’d reach the joints
- A few photos by email, if you can
- How many joints, rooms or windows are involved
For gutter sealing in Hordle, phone 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
FAQs for Hordle
Does living near the coast affect gutter sealing in Hordle?
Coastal weather is harder on outside sealant: there’s more wind-driven rain and, closer to the shore, salt in the air. Choosing the right sealant for the frame and wall, laid at the right depth, helps it last.
Will you come out to Hordle?
Yes, Hordle is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is it OK to seal over old sealant?
No, it won’t last. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you do not need to watch us work.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is it messy?
We keep the work tidy. Nearby surfaces are protected.
Is it possible to stop a gutter joint dripping with sealant?
Yes, as long as the gutter itself is in good order. We clean and dry the joint before sealing so the sealant bonds.
How long does gutter sealing take?
Typically it takes a few hours, depending on the number of joints and the access. Larger jobs naturally take longer.