Hampshire · England
Floor & skirting joints in Hordle, Hampshire
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homes and businesses in Hordle and across Hampshire. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Grout used at the floor edge instead of sealant
- Skirting caulk that keeps splitting
- Failed joint filler in concrete floors
How we handle floor joint sealing in Hordle
Large tiled floors, and those over underfloor heating, often need movement joints. We can turn a line of grout into a movement joint by replacing it with flexible sealant. We work on wet room & bathroom floors, skirting boards and tiled floors, and common reasons people get in touch are failed joint filler in concrete floors and grout cracking in a straight line across a floor.
If you’ve bought a new home in or near Hordle, the first year or two is a good time to check the sealant. Gaps at skirtings, shower seals pulling away and missing mastic around frames are common snags.
You’re covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Location
- Hordle (SO41)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
When it isn’t the sealant
Before booking, it’s worth knowing the limits:
- Movement too big for a sealant joint
- Concrete repairs beyond the joint
- Leaks from a failed tanking system
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly.
Where we work in Hordle
- Skirting boards
- Commercial floors
- Thresholds
- Concrete floor joints
- Tiled floors
- Wet room & bathroom floors
Other services in Hordle
Leave it or put it right?
Water that gets past a floor joint can damage the floor beneath. Dealing with it early keeps the repair to the joint. Homes in smaller places like Hordle can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
What you get with us
- White, clear, grey or another colour, product permitting
- Old sealant always removed completely
- Anti-fungal sanitary silicone in wet areas
- Tidy, careful work
See our cost guide or our reviews.
Do you need floor joint sealing in Hordle?
Some floors were never given a perimeter gap or movement joint. As it expands, the edges lift or crack, and the sealant or grout breaks.
Common reasons people contact us include:
- Tiled floors with no room to move
- Open gaps along the bottom of skirting boards
- Floor edges that trap water and grime
- Open joints around bathroom floor edges
If you let a flat or house near New Milton station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
What your quote should include
- Who does the work, and how experienced they are
- The length of the guarantee
- Whether you can choose the colour
- Whether they seal over old material or remove it
Landlord and commercial work in Hordle
We also work for property managers and facilities teams in Hordle and across Hampshire. We can quote a run of properties together, and we’re fully insured for the work.
We work for letting agents and landlords as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
Keeping the joints in good condition
A little care helps the new joints last. Our advice:
- Act on grout cracks that run in a straight line
- Lift furniture rather than dragging it across joints
- Keep caulk for dry, still joints only
- Vacuum floor joints regularly to stop grit building up
Keep heavy traffic off resealed concrete joints for the cure time we give you. Cone off the area if needed.
Open skirting gaps let in draughts, dust and sometimes insects. Sealing it keeps the room tidier and the edges sound.
Can I do it myself?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Floor joint sealing around Hordle
Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
For buildings such as Church of All Saints, floor and skirting joints in halls and kitchens wear like any others. For site and facilities teams at buildings such as Hordle CofE (VA) Primary School, entrance and corridor floor joints take a lot of traffic.
Hordle is about 3 miles west of Lymington, in Hampshire. Whether you’re in the middle of Hordle or further out, we cover floor joint sealing for every kind of property, from flats and houses to offices and hotels. Our area takes in 683 places across Hampshire. Our Southampton page covers work nearby.
Jobs for floor joint sealing in SO41 is quoted and booked the same way as anywhere else. Floor joint sealing is available to properties on Yerville Gardens, Acacia Road and Woodlands and the roads around them. Other places close to Hordle include Downton (1 mile south), Leagreen (1 mile south), Ashley (1 mile west), Tiptoe (2 miles north) and New Milton (2 miles west). We also work in nearby towns such as Totton (12 miles north-east), Lymington (3 miles east), Hythe (12 miles north-east), Ringwood (9 miles north-west), Dibden Purlieu (11 miles north-east) and Marchwood (12 miles north-east).
Around Hordle
Typical jobs here are in homes near The Arnewood School and the streets around them. The nearest railway station is New Milton station, about 1.7 miles west. Other landmarks nearby include Sammy Miller Motorcycle Museum (2.4 miles west) and Highcliffe Castle (4.4 miles west). The countryside around Hordle includes Milford on Sea LNR.
How it works
There’s no need to move everything out, just the space around the work. Everything nearby is protected, and the job takes a morning or an afternoon for most homes for a typical job. A visit to Hordle is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- First we check the joint and the floor and agree which sealant suits it.
- Old caulk, grout or sealant is removed from the joint.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- The sealant goes in, chosen for the floor and coloured to suit it.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Mention any tricky access
- Let us know about earlier repairs to the joints
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved and send you a clear quote.
Advice
FAQs for Hordle
Do you cover smaller places like Hordle?
Yes, Hordle is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you cover Hordle for floor joint sealing?
Yes, Hordle is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear quote.
How do I get a quote for floor joint sealing in Hordle?
Size, access and the old material all affect the cost. Ask us for a quote and we’ll talk you through it.
Where are you based?
We’re based in Crawley, and we work across South East England, London and Scotland.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How long does the job take?
A typical job takes a few hours, depending on the length of joint. Your quote will say how long we expect yours to take.
Can you use decorators’ caulk instead?
Because caulk cracks where there’s movement or water. Skirting joints move with the floor, so we use a flexible sealant that stretches.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.