Hampshire · England
Remedial sealant & repairs in Mead End, Hampshire
Problem with your failed sealant joints in Mead End? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Mould trapped under a layer of silicone
- Movement joints that have split or pulled away
- Sealant applied over old sealant that has lifted
About our remedial sealant in Mead End
The wrong product in the wrong joint fails however neatly it’s applied. Out it comes, and in goes a sealant suited to the job. Typical jobs include repeat leaks from the same joint and decorators’ caulk around a bath or shower, across leaking tray & enclosure joints, expansion joints and failed movement joints.
In a village or hamlet like Mead End, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
A 12-month guarantee comes as standard.
- Place
- Mead End (SO41)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
More services for Mead End
Why it’s worth doing now in Mead End
Another bead over the top will not fix a failed joint. It doesn’t grip the old layer, leaving the leak in place and one more layer to cut out later. In a small place like Mead End, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. We give a clear quote before work begins, so you know where you stand.
Why us?
- We never seal over old sealant
- Arbo and Everbuild products
- Anti-fungal silicone where joints get wet
- Sealant colour chosen to suit
Take a look at what affects the cost or what customers say.
Bathrooms and kitchens in Mead End
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Homes close to St Andrew include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant. For landlords with property near Sway station, a joint that keeps failing is best fixed properly while the property is empty.
Mead End is about 4 miles north-west of Lymington, in Hampshire. For remedial sealant in and around Mead End, please ring 0345 464 0079 or drop us an email for a quick quote. We’re based in Crawley and cover Hampshire, Mead End included. Mead End is one of 683 places in Hampshire we cover for remedial sealant. Our Southampton page covers work nearby (14 miles or so).
Every address in SO41 is within our area for remedial sealant, from the main roads to the quietest streets. If you need remedial sealant at a property on Marley Mount and Boundway or a nearby road, we can help. We also cover Tiptoe (1 mile south), Sway (1 mile east), Bashley (1 mile south-west), Ashley (2 miles south) and Wootton (2 miles west). Further out, we also cover Totton (11 miles north-east), Lymington (4 miles south-east), Hythe (11 miles north-east), Ringwood (8 miles north-west), Barton on Sea (3 miles south-west) and Dibden Purlieu (11 miles north-east).
Landmarks near Mead End
In Mead End, that means homes and buildings near The Plough Public House. Mead End’s nearest station is Sway station, about 0.9 miles east of the centre. A little further out are Lymington New Forest Hospital (3.8 miles east) and Sammy Miller Motorcycle Museum (2.2 miles south-west). Not far away are Milford on Sea LNR.
Your questions about remedial sealant in Mead End
Can you do remedial sealant in Mead End?
Yes, Mead End is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or email us with a few details of the job.
Is Mead End within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you offer different sealant colours?
Yes. White, clear and grey are common, and other colours are available, and we will agree it with you first.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
How long does the work take?
Allow a few hours for a typical bath or shower, longer where several layers have been applied. You will know the timing when we quote.
Can tenants book the work?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Where are you based?
Mr Mastic is based in Crawley. Our applicators cover Mead End, along with the rest of our area.
Can I add another job to the visit?
Yes. More than one area can go on one quote.
When it is not the sealant
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Older mastics that may need an asbestos check before removal
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Failed tanking or loose tiles behind the sealant
If you are not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Surfaces we seal
- Failed movement joints
- Leaking tray & enclosure joints
- Expansion joints
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
What happens on the day
We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes a few hours for a typical bath or shower, longer where several layers have been applied. In a small place like Mead End, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
Preparing for the visit
- Clear items away from the joints we’re working on
- Let us know about parking restrictions
- Mention if the joints have been sealed before
Ask for a quote
There’s no standard price list. Instead, we give you a clear quote for your job. To get started, phone 0345 464 0079 or send us an email.
Read more
When to call us in Mead End
Some joints fail because water is reaching them from behind. A slow leak behind the tiles soaks the joint from the back, so the silicone goes mouldy or lets go.
People normally contact us after spotting one of these:
- Wide, uneven beads that look worse than the old ones
- Worktop sealant that has shrunk and split
- Decorators’ caulk around a bath or shower
- Sealant that came away because the surface wasn’t prepared
For site and facilities teams at buildings such as Tiptoe Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Comparing quotes
- Who turns up on the day
- Which sealant they’ll use, and why
- How long to leave it before use
- How hidden problems are handled
What the job involves on each surface
Worktops & kitchens
Shrunken worktop sealant leaves a gap that lets water into the back edge. It’s cut out, degreased and resealed.
Leaking trays & enclosures
When failed joints are the cause, they’re all cut out and renewed, tray edges and screen profiles included.
For landlords and businesses
Letting agents often deal with us directly. Tell us the address, the job and how access works.
Housing providers, facilities teams and property managers book us too in Mead End and across Hampshire. We can quote a run of properties together.