Hampshire · England
Ossemsley Remedial Sealant
Remedial sealant across Ossemsley and nearby, with old sealant always removed completely and a 12-month guarantee.
- Repeat leaks from the same joint
- Movement joints that have split or pulled away
- Sealant peeling off a dusty or damp surface
Ossemsley homes and their sealant
Ossemsley is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near New Milton station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak. If you live in an older home near St John, older homes can move a little, which is hard on rigid grout and tired sealant.
Ossemsley is about 2 miles north of New Milton, in Hampshire. Homes, rented property, offices and hotels in Ossemsley can book us for remedial sealant. The work is guaranteed for a year. 683 places in Hampshire are on our list. We also work in Southampton, about 15 miles from Ossemsley.
We work across the BH25 postcode area for remedial sealant and the streets around it. Remedial sealant is available to properties on Green Lane and Ossemsley South Drive and the roads around them. We also cover Bashley (1 mile south-east), Wootton (1 mile north), Tiptoe (2 miles east), Mead End (2 miles east) and Ashley (2 miles south-east). Larger places within reach include Totton (12 miles north-east), Lymington (5 miles east), Hythe (13 miles north-east), Ringwood (7 miles north-west), Barton on Sea (3 miles south) and Dibden Purlieu (12 miles north-east).
Local landmarks in Ossemsley
We work in homes and buildings around The Arnewood School and The Rising Sun pub. The closest station to Ossemsley is New Milton station, roughly 1.7 miles south of the centre. Well-known places in the area include Highcliffe Castle (3.5 miles south-west) and Sammy Miller Motorcycle Museum (1 mile south). Green spaces nearby include Milford on Sea LNR.
How we handle remedial sealant in Ossemsley
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, without scratching tiles, trays or frames. Only then can new sealant bond. We’re often asked to deal with kitchen joints letting water behind the worktop and black mould underneath the bead, on mouldy bath & shower sealant, shrunken worktop sealant and leaking tray & enclosure joints.
Being in a small place like Ossemsley makes no difference to the job itself: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
Our work is backed for twelve months, in Ossemsley and everywhere else we cover.
- Place
- Ossemsley (BH25)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Common questions in Ossemsley
Can you help a landlord with a rental near New Milton station?
Yes, we work for landlords and agents. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Do you cover Ossemsley for remedial sealant?
Yes. We work across London and the South East, and Ossemsley is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Are you ARBOMaster approved?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
How long does remedial resealing take?
The number of joints and layers decides it. We’ll tell you before we start.
Can I choose the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Can you reseal a split movement joint?
Yes. We cut out the failed sealant, fit backing and reseal with a flexible product.
Will the old sealant be removed?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Do you have insurance?
Yes. Full insurance covers our work.
What happens on the day
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours, depending on how many layers have to come out. Somewhere like Ossemsley needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
How to prepare
- Clear items away from the joints we are working on
- Mention any leaks or damp you’ve noticed
- Plan for the work area to be out of bounds to pets and children
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
Advice
Surface by surface
Movement & expansion joints
A sealant stuck to the back of the joint can’t stretch. Backing rod or bond-breaker tape prevents it, letting the sealant flex between the two faces.
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. We strip it, degrease the joint and reseal.
More services for Ossemsley
Honest limits
Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant will not put right:
- Older mastics that may need an asbestos check before removal
- Water damage behind tiles that needs a tiler
- A tray or bath that’s cracked
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think.
Surfaces we seal
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Botched or over-sealed joints
Signs you need remedial sealant in Ossemsley
Joint depth matters. Sealant packed too deep, or stuck to the back of the joint as well as the sides, can’t stretch, so it tears when the joint moves. Backing sets the depth and stops that.
People usually contact us after spotting something like this:
- A second bead peeling off the first
- A shower that leaks however often it’s resealed
- Black mould underneath the bead
- Worktop sealant that has shrunk and split
For site and facilities teams at buildings such as Ballard School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What your quote should include
- What happens if the job turns out different
- How long to leave it before use
- Whether you can choose the colour
- What guarantee comes with the work
Landlords, agents and businesses in Ossemsley
We work for letting agents and landlords as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can go on one quote.
What happens if it’s left?
A failed seal rarely means a new bathroom. If the bath, tray and tiles are sound, remedial resealing normally puts it right. If they’re not, we’ll tell you. In a small place like Ossemsley, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Combining jobs into one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Why book with us
- Sealant colour chosen to suit
- Sanitary silicone with an anti-fungal additive in wet areas
- Approved under the ARBOMaster scheme
- Every job guaranteed for a year
See how sealant jobs are priced and our reviews.
Looking after it afterwards
To keep the joints looking good and working properly:
- Get the cause of a repeat leak found before resealing
- Don’t add new sealant on top of old
- Use a soft cloth, not a scourer, on silicone
- Run the fan after every shower
Leave the new joint to cure fully before it gets wet or moves: follow the cure time we give you.
Movement joints that have split let water into the structure, and the longer it’s left, the more the joint edges break down. A joint with sound edges is far easier to reseal.