Aberdeenshire · Scotland
Remedial sealant & repairs in Hillside, Aberdeenshire
Removing failed, mouldy or leaking sealant and putting it right in Hillside, with a one-year guarantee on every job. Call for a quick quote.
- Movement joints that have split or pulled away
- Caulk or the wrong sealant used in a wet area
- Smears and lumps from a botched reseal
Remedial sealant in Hillside
A joint that keeps letting you down needs more than another bead. Send pictures when you send an email to info@mrmastic.co.uk, and say how long ago it was last done. If you’re dealing with worktop sealant that has shrunk and split and sealant applied over old sealant that has lifted, we can put it right, on expansion joints, leaking tray & enclosure joints and failed movement joints alike.
Bathrooms in smaller places like Hillside work just as hard as those in the cities. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
Every job is covered by our 12-month guarantee, wherever you are in Aberdeenshire.
- Location
- Hillside (DD10)
- Wider area
- Aberdeenshire
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
How to look after the new joints
So the new joints stay in good condition:
- Find out why the sealant failed first
- Don’t point over movement joints
- Report a tray that rocks or a worktop that lifts
- Always have old sealant cut out, not covered
Where we’ve pointed out another fault, have it put right, because the new sealant can’t hold back a problem underneath.
Leaks through failed sealant grow over time. Each use pushes more water behind the bead, into whatever is behind or below. Early action keeps it to a sealant job.
Different surfaces, different methods
Worktops & kitchens
A loose worktop splits its sealant. That needs refixing before resealing, which we’ll point out.
Mouldy bath & shower sealant
Repeat mould generally points to a damp, poorly aired room. Along with resealing, we will mention if the room needs better ventilation.
Your questions about remedial sealant in Hillside
Is Hillside in your area for remedial sealant?
Yes, Hillside is within the area we cover. Our work covers the whole of Scotland. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing, and we’ll give you a clear quote.
Do you work for landlords with property near Montrose station?
Yes. We work for landlords and agents as well as householders, and several properties can be quoted together. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll send you a clear quote.
Can you strip sealant from an acrylic tray safely?
Yes, with care. The old bead is cut and lifted with tools that suit the surface, and the residue is cleaned away. We point out any damage that is already there.
Where do you work from?
Our base is Crawley. We work across South East England, London and Scotland.
Can you match the sealant colour?
In most cases you can choose. We’ll explain which colours are available and agree one before we start.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
How much does remedial sealant cost in Hillside?
Size, access and the old material all affect the cost. Call for a quick quote and we’ll talk you through it.
What sealant do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
Hillside homes and their sealant
Hillside is within about 2 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
In and around Hillside, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
Hillside is about 2 miles north of Montrose, in Aberdeenshire. We carry out remedial sealant for homeowners, landlords and businesses in Hillside. Our area takes in 161 places across Aberdeenshire. Our Dundee page covers work nearby (27 miles or so).
Every address in DD10 is within our area for remedial sealant, from the main roads to the quietest streets. That includes homes and businesses on Scott Crescent, Dickson Avenue and Cruickshank Park and the roads around them. Other places close to Hillside include Montrose (2 miles south), Craigo (2 miles north-west), Ferryden (3 miles south), Marykirk (3 miles north-west) and St Cyrus (3 miles north-east). Within a short drive, we also cover Laurencekirk (6 miles north), Inverbervie (10 miles north-east) and Johnshaven (6 miles north-east).
Around Hillside
Hillside’s nearest station is Montrose station, roughly 2.1 miles south. Well-known places in the area include Stracathro Hospital (5.7 miles north-west) and Montrose Castle (2.5 miles south). Open spaces near Hillside include Duns Dish and St Cyrus National Nature Reserve.
What happens if it’s left?
A failed seal rarely means a new bathroom. When the fittings are sound, stripping and resealing the joints is often enough. If they’re not, we’ll tell you. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Ask us for a quote and we’ll go through it with you.
Why choose Mr Mastic in Hillside
- A choice of colours where the product allows
- ARBOMaster approved applicator
- You choose the colour before work begins
- Anti-fungal sanitary silicone in wet areas
Take a look at our cost guide and customer reviews.
More services for Hillside
What sealant work can’t fix
We won’t take on work that won’t last, so here’s what sealant cannot put right:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Cracks in the fitting rather than the joint
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
If you are not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer.
What we seal
- Failed movement joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Botched or over-sealed joints
- Expansion joints
When to call us in Hillside
Using the wrong product is a common cause: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. Each fails in its own way.
Signs it’s time to call us include:
- Floor or wall movement joints that have failed
- Mould trapped under a layer of silicone
- Beads that never stuck properly
- A second bead peeling off the first
If you let a flat or house near Montrose station, botched sealant from a previous quick fix is easier to strip out between tenants.
What to look for in a quote
- How much experience the applicator has
- How long the guarantee is
- What happens if they find a problem under the old sealant
- Whether VAT is included
What happens on the day
When we arrive, we start by going over the job with you. Surfaces next to the work are protected before any work begins. The work normally takes a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere like Hillside may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- We tool the joint and tell you about anything else that needs attention.
Before we arrive
- Tell us about any previous sealing or DIY attempts
- Tell us about any water getting in
- On commercial sites, let us know about site rules
Getting a quote
Asking for a quote is easy: let us know what needs doing and where. A few pictures by email make the job easier to understand.
Related advice
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.