Aberdeenshire · Scotland
Ferryden Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for Ferryden, backed by a 12-month guarantee. Ask us for a quote.
- Decorators’ caulk around a bath or shower
- Smears and lumps from a botched reseal
- Torn expansion joints
Remedial sealant in Ferryden, done properly
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, without scratching tiles, trays or frames. Only then can new sealant bond. We’re often asked to deal with a second bead peeling off the first and black mould underneath the bead, on botched or over-sealed joints, mouldy bath & shower sealant and shrunken worktop sealant.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are usually the first signs.
Every job is covered by a 12-month guarantee.
- Where
- Ferryden (DD10)
- Region
- Aberdeenshire
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
How the visit works
You don’t need to clear the whole room or building, only the area right around the joints. We protect the rest, and the job takes a few hours for a typical bath or shower, longer where several layers have been applied in most cases. For a place like Ferryden, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- Surrounding tiles, trays and frames are protected first.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Getting ready for the visit
- Clear the area around the work
- Let us know about earlier repairs to the joints
- Mention any leaks or damp you’ve noticed
Ask for a quote
Every job is quoted individually, so the first step is telling us about yours. Simply send an email to info@mrmastic.co.uk and describe the job.
Read more
Places near Ferryden
What else we do in Ferryden
Remedial sealant around Ferryden
Ferryden is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
If you let a flat or house near Montrose station, a joint that keeps failing is best fixed properly while the property is empty. In the older streets around Inchbrayock U.F. Church, older homes can move a little, which is hard on rigid grout and tired sealant.
Ferryden is about 1 mile south of Montrose, in Aberdeenshire. Anywhere in DD10, we cover remedial sealant for homes and businesses. Our Aberdeenshire coverage runs to 161 places, Ferryden among them. There’s also a page for Dundee, roughly 25 miles from Ferryden.
We cover every part of the DD10 postcode area for remedial sealant. Local streets include Usan Road, Mill Lane and Croft Road, all of which we cover. Nearby, we also carry out remedial sealant in Montrose (1 mile north), Kirkton of Craig (1 mile south-west), Hillside (3 miles north), Craigo (5 miles north) and St Cyrus (5 miles north). We also work in nearby towns such as Laurencekirk (9 miles north), Inverbervie (12 miles north-east) and Johnshaven (8 miles north-east).
Around Ferryden
Locally, jobs take us to homes and businesses close to The Quarter Deck pub and the streets around them. The closest station to Ferryden is Montrose station, roughly 0.9 miles north of the centre. A little further out are Montrose Museum (0.6 miles north) and Montrose Castle (0.6 miles north-west). The countryside around Ferryden includes Montrose Basin.
Landlord and commercial work in Ferryden
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
If you manage several properties in or around Ferryden, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.
Surface by surface
Windows & doors
Smeared or badly matched mastic can be cut out and redone neatly, in a colour that suits the frame.
Over-sealed & botched joints
Previous removal attempts can leave scratches or gouges. We work carefully to avoid adding to it, and tell you about any damage we find.
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.
How to look after the new joints
A little care helps the new joints last. Our advice:
- Run the fan after every shower
- Never fill a movement joint with mortar or grout
- Deal with small splits early
- Do not add new sealant on top of old
Ventilation keeps mould away from the new bead: run the fan during and after showers, or open a window.
Don’t keep resealing the same joint. Get the cause found first, otherwise the next attempt will fail too.
What we are called out for in Ferryden
Even good sealant ages. Over the years it shrinks, hardens and gets colonised by mould, faster where ventilation is poor. Then the only fix is removal and a new bead.
The problems people usually mention when they call include:
- Wide, uneven beads that look worse than the old ones
- Repeat leaks from the same joint
- Torn expansion joints
- Sealant that came away because the surface wasn’t prepared
If you look after a building such as Montrose Academy, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- Whether you can choose the colour
- What insurance they hold
- The length of the guarantee
- What preparation is included
What sealant work cannot fix
To be straight with you, some problems need a different trade:
- Failed tanking or loose tiles behind the sealant
- Cracks in the fitting rather than the joint
- A bath, tray or worktop that moves until it’s properly fixed
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think before booking.
Where we work in Ferryden
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Failed movement joints
- Shrunken worktop sealant
- Expansion joints
Questions from Ferryden
Is Ferryden in your area for remedial sealant?
Yes, Ferryden is within the area we cover. Our work covers the whole of Scotland. You can email us at info@mrmastic.co.uk and tell us what needs doing.
Do you cover smaller places like Ferryden?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Is remedial work guaranteed?
Yes, for 12 months. If we’ve pointed out another problem, getting it fixed helps the new joint last.
Can you do several jobs on one visit?
Yes. Several rooms, windows or areas can go on one quote.
When is the sealant fully cured?
Cure times vary by product and the conditions. We tell you how long to leave it before we go.
How do I get a quote for remedial sealant in Ferryden?
It depends on the job, so we quote each one individually. To get one, drop us a line at info@mrmastic.co.uk with a short description of the job.