Greater London · England

Fulham Remedial Sealant

Remedial sealant for Fulham and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.

  • Torn expansion joints
  • Beads that never stuck properly
  • A shower that leaks however often it’s resealed

Remedial sealant for Fulham homes and businesses

Remedial sealant in Fulham

Movement and expansion joints fail when the sealant can’t stretch. We cut out the failed sealant and set the depth with backing, before resealing with a flexible product suited to the movement. Typical jobs include sealant applied over old sealant that has lifted and wide, uneven beads that look worse than the old ones, across leaking tray & enclosure joints, mouldy bath & shower sealant and shrunken worktop sealant.

Hard London water leaves limescale on sealant, grout and taps alike. For a bathroom or kitchen in Fulham, getting the joints right keeps water where it belongs and the room looking clean.

The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or send us an email.

Location
Fulham (SW6, W6, W14)
Wider area
Greater London
Guarantee
A year, on every job
Quote
A clear quote up front
Call
0345 464 0079
Updated
26 October 2026
Mr Mastic applicator smiling as he applies silicone to the corner of a bath

What affects the quote in Fulham

Some jobs are bigger than they look, and some smaller. The main factors:

  • Whether old sealant or filler has to be cut out
  • Access and height
  • The product the joint needs
  • The amount of work

Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.

Asking for a quote

What to tell us when you ask for a quote:

  • What the problem is, such as mould, gaps, leaks or cracking
  • Whether it has been sealed before
  • The rough size of the job
  • The type of property

Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, call 0345 464 0079 or email us.

Looking after it afterwards

After the cure time, these simple habits help:

  • Look for stains below bathrooms now and then
  • Report a tray that rocks or a worktop that lifts
  • Act on a lifting corner right away
  • Don’t point over movement joints

Go easy on the new sealant: no scraping, scouring pads or harsh chemicals.

Movement joints that have split let water into the structure, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.

Signs you need remedial sealant in Fulham

Joint depth matters. A bead bonded on three sides, or laid too thick, can’t flex, so it tears when the joint moves. Backing sets the depth and stops that.

The most common problems we see are:

  • Worktop sealant that has shrunk and split
  • Mould trapped under a layer of silicone
  • Movement joints that have split or pulled away
  • Sealant peeling off a dusty or damp surface

For landlords with property near West Brompton station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.

Comparing quotes

  • Who does the work, and how experienced they are
  • How hidden problems are handled
  • How long to leave it before use
  • What insurance they hold

10 questions to ask before you book

Why it’s worth doing now in Fulham

DIY removal often leaves scratches and a film of residue, and the residue left behind stops the next bead bonding. Careful removal is most of a remedial job. In a flat in Fulham, failed sealant seldom stays inside your own four walls: water can reach the neighbours below, and gaps in fire-rated joints affect the whole building.

We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or drop us an email.

Why Fulham clients choose us

  • We agree the colour with you first
  • White, clear, grey or another colour, product permitting
  • Neat joints and a tidy finish
  • Old sealant always removed completely

Take a look at our cost guide and what customers say.

How the job changes by surface

Over-sealed & botched joints

Thick, smeared sealant looks messy and hides problems. Taking it back shows what’s underneath, and then we reseal it neatly.

Windows & doors

Wrong-coloured or messy mastic can be replaced for appearance too, in a colour that suits the frame.

Common questions in Fulham

I let a flat near West Brompton station. Can you help?

Yes, we work for landlords and letting agents. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll send you a clear quote.

Could a tired shower seal in my Fulham flat affect the neighbours below?

Yes, and the first sign is often a stain on the ceiling below. Cutting out the old sealant and laying a new bead early stops it getting that far.

What if resealing won’t fix my leak?

Then we explain what we’ve found. A plumber or fitter may be needed.

Do you cover Fulham?

Yes. We work in Fulham. For a quote, phone 0345 464 0079 or drop us an email.

Is it messy?

No. We work neatly, protect the area around the joints and tidy up afterwards.

Can I add another job to the visit?

Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

How long will it take to strip and reseal the joint?

Allow a few hours for most joints, depending on how much old sealant has to come out. You will know the timing when we quote.

Does someone need to be in?

We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.

What we do, step by step

Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for a typical bath or shower, longer where several layers have been applied. In Fulham, as in most of London, parking needs a little planning. A visitor permit or a nearby bay makes the visit run more smoothly.

  1. We start by checking the joint for movement, leaks and the reason it failed.
  2. All the old sealant comes out, including any layers underneath.
  3. We clean the joint, treat any mould and let it dry.
  4. Where the joint moves, backing and a flexible sealant suited to the movement go in.
  5. The new joint is tooled neatly and we explain anything else we found.

Preparing for the visit

  • Mention any leaks or damp you’ve noticed
  • Tell us if parking is tricky
  • Let us know about stairs, lifts or work at height

Ask for a quote

Every job is quoted individually, so the first step is telling us about yours. Just ring 0345 464 0079 or send us an email with the details, and pictures are welcome.

Get a price

Related advice

Can I do it myself?

Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

Remedial sealant around Fulham

In a London flat, water from a failed bath or shower seal can reach the neighbours below, so tired sealant is best dealt with early. London has hard water, which leaves limescale on sealant, grout and taps.

If you look after a building such as St Johns Walham Green Church of England Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. In the older streets around St. Peter's Church, walls and floors in older homes can move, and sealant and grout show it first.

Fulham is about 2 miles south of Kensington, in Greater London. Anywhere in SW6, we cover remedial sealant for homes and businesses. Fulham is one of 764 towns and villages in Greater London where we work.

We work across SW6, W6 and W14 for remedial sealant and the streets around it. Whether your property is on Lampeter Square, Fulham High Street and Hurlingham Square or a nearby road, we can help. You’ll find Fulham on the A219 and A304, which makes it straightforward to reach with everything needed for remedial sealant. If you are just outside Fulham, we cover West Kensington (1 mile north), North End (1 mile north), Putney (1 mile south-west), Brook Green (1 mile north-west) and Hammersmith (2 miles north-west). We also work in nearby towns such as London (5 miles east), City of Westminster (3 miles north-east), Marylebone (4 miles north-east), St Pancras (5 miles north-east), Shoreditch (6 miles north-east) and Walthamstow (11 miles north-east).

Near you in Fulham

We work in homes and buildings around Parsons Green (park), Fulham Cross Girls' School and Language College and The Cock pub and the streets around them. Also close by are Queensmill School (0.7 miles south-east) and Polish Library POSK in London (1.7 miles north-west). Fulham’s nearest station is West Brompton station, roughly 0.8 miles north-east. Other landmarks nearby include Chelsea Stadium Tour And Museum (0.8 miles east) and Putney Exchange (1.1 miles south). For a walk, there’s Battersea Park Lake and Campden Hill.

Map of Fulham © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job