Brighton and Hove · England
Regrouting in Whitehawk, Brighton and Hove
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Whitehawk and across Brighton and Hove. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Grout washed out of a shower
- Kitchen splashback grout stained by grease
- Corners filled with grout instead of silicone
Regrouting for homes and businesses in Whitehawk
We take the old grout out to a consistent depth, without damaging the edges of the tiles. After vacuuming, new grout goes in and the tiles are wiped clean, with silicone renewed in the corners. If you are dealing with grout in corners that has cracked and stained grout that cleaning won’t shift, we can help, whatever the surface.
Smaller places like Whitehawk still have plenty of bathrooms that work hard every day. Older or newer, every room gets the same approach: all the old material out, the joint cleaned and dried, then new sealant or grout.
There’s a 12-month guarantee on every job, whatever its size.
- Location
- Whitehawk (BN2)
- Wider area
- Brighton and Hove
- Cover
- 12 months on all our work
- Price
- A clear price before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Common questions in Whitehawk
Can you help a landlord with a rental near Brighton station?
Yes. We work for landlords and agents as well as householders. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover smaller places like Whitehawk?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you regrout if a few tiles are loose?
New grout cannot hold loose tiles in place. We check the tiles first and tell you if any are loose or hollow so you know where you stand.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. Our applicators cover Whitehawk, along with the rest of our area.
Can you quote for more than one area?
Yes. Several rooms, windows or areas can go on one quote.
What do you put in the joint?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Do the sealants smell?
Some sealants have a smell while they cure, which fades as it sets. Opening a window helps.
What should I tell you?
A short description and the location, with pictures by email if possible. If we need more, we’ll ask.
What the job involves on each surface
Wet rooms
Wet rooms have water across the floor, so sound grout really matters. We check for loose tiles before starting.
Shower walls
A shower wall is soaked daily, so its grout takes the most punishment. It generally fails first.
Why deal with it now?
Grouting over old grout rarely lasts. A thin skin on top tends to break off. Raking out to a consistent depth gives the new grout something to hold. Homes in smaller places like Whitehawk can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we will explain what it covers.
Why book with us
- We leave the area clean and tidy
- Full insurance on every job
- Any old sealant cut out fully, not covered over
- 20+ years of sealant experience
Read our cost guide or customer reviews.
Towns and villages near Whitehawk
Also in Whitehawk
Honest limits
A few problems are outside what sealant work can do:
- Cracked or broken tiles
- Water coming from plumbing rather than grout
- Failed tanking or waterproofing under the tiles
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.
What we seal
- Bathroom wall tiles
- Bathroom floors
- Shower walls
- Kitchen splashbacks
- Wet rooms
- Tiled floors
What affects the quote in Whitehawk
Some jobs are bigger than they look, and some smaller. The main factors:
- Access and height
- The size of the job
- The product the joint needs
- Whether there’s mould to deal with
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What we need to know
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- If someone has resealed it before
- A few pictures by email, if you can
- The problem you’ve noticed
- Where the job is, and your postcode
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. Whenever you’re ready, call 0345 464 0079 or send us an email.
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Whitehawk homes and their sealant
Whitehawk is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Whitehawk has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
If you let a flat or house near Brighton station, a regrout while the flat is empty is quicker than working around a tenant. For an older house near a landmark such as St Cuthman's, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Whitehawk is about 1 mile south-east of Brighton, in Brighton and Hove. Every kind of property in Whitehawk is covered for regrouting. Every job comes with our one-year guarantee. Whitehawk is one of 30 towns and villages in Brighton and Hove where we work.
Postcode districts we cover here for regrouting: BN2. Streets in the area include Peel Road, Manor Road and Craven Road. Neighbouring places we cover for regrouting include Kemptown (1 mile south-west), Hanover (1 mile west), Carlton Hill (1 mile west), Bevendean (1 mile north) and Brighton (1 mile north-west). Larger places within reach include Brighton and Hove (4 miles west), Hove (3 miles west), Aldrington (4 miles west), Withdean (3 miles north-west), Hangleton (5 miles north-west) and Patcham (3 miles north-west).
Around Whitehawk
Locally, jobs take us to homes and businesses close to St Mary's Hall, Whitehawk Hill and Longhill High School. The nearest railway station is Brighton station, roughly 1.6 miles west of the centre. Well-known places in the area include Brighton Motor Museum (0.7 miles south-west) and Royal Sussex County Hospital (0.6 miles south-west). Green spaces nearby include Newmarket Hill and Whitehawk Hill.
Do you need regrouting in Whitehawk?
Some grout fails because it was mixed or laid badly. Grout that was too wet, not packed in or cleaned off too hard tends to wash out early.
Look out for these signs:
- Good tiles let down by tired grout
- Kitchen splashback grout stained by grease
- Grout stained black or orange that will not clean
- A grout colour that no longer suits the room
Schools such as City Academy Whitehawk are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
What to look for in a quote
- Whether you can choose the colour
- How hidden problems are handled
- What preparation is included
- Whether they seal over old material or remove it
How it works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes anything from a few hours to a full day, depending on the area. Parking around Whitehawk is normally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We check the tiles for any that are hollow or loose.
- We rake out the grout evenly, protecting the tile edges.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- Silicone goes into the corners and along the edges.
Before we arrive
- Clear the area around the work
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
Getting a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved and send you a clear quote.