Brighton and Hove · England
Whitehawk Floor Joint Sealing
Floor joints in Whitehawk need attention? We cut out the old, prepare the joints and apply the right sealant.
- Skirting that has pulled away from the floor
- Gaps between floors and kitchen plinths
- Cracked caulk along skirting in bathrooms and kitchens
About our floor joint sealing in Whitehawk
Wet-area floor joints keep water out of the gap behind skirting and plinths. We seal them with a flexible, water-resistant sealant. We work on commercial floors, tiled floors and skirting boards, and the jobs we see most are skirting caulk that keeps splitting and gaps at thresholds between rooms.
If you’ve bought a new home in or near Whitehawk, the first year or two is a good time to check the sealant. Common snags include open skirting joints, lifting shower seals and gaps around frames.
There’s a 12-month guarantee on every job, whatever its size.
- Place
- Whitehawk (BN2)
- Wider area
- Brighton and Hove
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What we’re called out for in Whitehawk
Floors and walls move a little with the seasons. In winter, with the heating on, timber dries and gaps open.
The most common problems we see are:
- Grout used at the floor edge instead of sealant
- Failed joint filler in concrete floors
- Caulk that has cracked where the floor moves
- Open gaps along the bottom of skirting boards
Rented homes near Brighton station change hands often, and gaps at skirtings and thresholds are worth sealing between tenancies.
Before you book anyone
- The length of the guarantee
- How much experience the applicator has
- How hidden problems are handled
- How the colour is chosen
What the job involves on each surface
Skirting boards
If the skirting is painted, a paintable flexible sealant works well. Where water is involved, silicone is the better choice.
Commercial floors
Commercial floors take more traffic than most homes. We talk through the traffic and choose a sealant suited to it.
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Mark off resealed joints in warehouses
- Keep floor cleaning water to a minimum at the edges
- Don’t fill floor joints with caulk where they move or get wet
- Act on grout cracks that run in a straight line
Keep off the joint for the time we give you. Light foot traffic is generally fine sooner than wet cleaning or wheels so we will give you each time.
In wet areas, an open floor joint lets water reach the subfloor. Resealing early keeps it out.
What we do, step by step
We keep the work tidy and contained to the area we’re working on. Expect the work to take a few hours for most rooms, longer for large commercial floors, and we explain the cure time before we leave. A visit to Whitehawk is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- The room is cleared along the joints so we can reach them.
- Old material is removed from the joint.
- Edges are cleaned and dried.
- A flexible sealant suited to the floor is applied and tooled.
- Finally, we check the work and talk you through aftercare.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Keep pets and children clear of the area while we work
- For indoor joints, keep the area dry beforehand if you can
Get a quote
We do not publish a price list, because every job is different. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or drop us an email.
Read more
When it isn’t the sealant
In fairness, some problems need a different trade:
- Loose, hollow or cracked tiles, which need a tiler
- Damaged concrete that needs breaking out and repairing
- Structural movement or subsidence
If in doubt, phone 0345 464 0079 or email us and we will say what we think before booking.
Where we work in Whitehawk
- Skirting boards
- Thresholds
- Concrete floor joints
- Commercial floors
- Wet room & bathroom floors
- Tiled floors
Also near Whitehawk
Also in Whitehawk
Should I try it myself first?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Whitehawk: your questions answered
Is Whitehawk within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you cover Whitehawk for floor joint sealing?
Yes, Whitehawk is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.
Can new sealant go over the old?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. The old sealant has to come out completely.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we’ll explain our choice.
Do you have insurance?
Yes. Full insurance covers our work.
Can sealant along the skirting be painted?
Where the skirting will be painted, we can use a flexible sealant that takes paint. Silicone isn’t made to be painted, so it’s kept for wet areas and unpainted joints.
Do you seal warehouse floor joints?
Yes. Concrete floor joints in warehouses and units are part of our work. We’ll talk through the traffic and choose a sealant suited to it.
Can you match the sealant colour?
Normally, yes. Sealants come in white, clear, grey and other colours, and we will agree it with you first.
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
New homes and floors in Whitehawk
Floors around Brighton and Hove run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. The joint at the skirting or threshold has to allow for that.
Community buildings like St Cuthman's are part of the picture too: floor and skirting joints in halls and kitchens wear like any others. If you look after a building such as City Academy Whitehawk, entrance and corridor floor joints take a lot of traffic.
Whitehawk is about 1 mile south-east of Brighton, in Brighton and Hove. Whitehawk gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Whitehawk is one of 30 places in Brighton and Hove we cover.
We work across the BN2 postcode area for floor joint sealing and the streets around it. Streets in the area include Peel Road, Manor Road and Craven Road. We also cover Kemptown (1 mile south-west), Hanover (1 mile west), Carlton Hill (1 mile west), Bevendean (1 mile north) and Brighton (1 mile north-west). Further out, we also cover Brighton and Hove (4 miles west), Hove (3 miles west), Aldrington (4 miles west), Withdean (3 miles north-west), Hangleton (5 miles north-west) and Patcham (3 miles north-west).
What’s near Whitehawk
Around Whitehawk, our work takes us to homes and buildings near St Mary's Hall, Whitehawk Hill and Longhill High School. For rail, the closest station is Brighton station, roughly 1.6 miles west. Well-known places in the area include Brighton Motor Museum (0.7 miles south-west) and Royal Sussex County Hospital (0.6 miles south-west). Open spaces near Whitehawk include Newmarket Hill and Whitehawk Hill.