West Sussex · England
Washington Regrouting
Problem with your tiled areas in Washington? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Kitchen splashback grout stained by grease
- Discoloured grout on otherwise sound tiles
- Crumbling grout between the tiles
Signs you need regrouting in Washington
Hard water and soap leave a film on grout and stick to it. The grout beneath can stain and weaken, and at that point, new grout is the better answer.
Look out for these signs:
- Gaps where the shower grout has gone
- Crumbling grout between the tiles
- Floor grout that has worn and darkened
- Grout in corners that has cracked
If you look after a building such as St Mary's CofE Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
What to look for in a quote
- How long to leave it before use
- Whether the sealant suits the joint
- Is the old sealant removed completely?
- What the quote includes, VAT included or not
Regrouting in Washington
A bathroom with good tiles can still look worn if the grout has gone. With regrouting, the tiles stay and only the grout is renewed, so there’s no stripping out and no new tiles to choose. If you are dealing with grout stained black or orange that won’t clean and greasy, stained grout behind the hob, we can put it right, on bathroom floors, tiled floors and shower walls alike.
For a small place like Washington, regrouting is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
Each job carries a 12-month guarantee.
- Location
- Washington (RH20)
- Region
- West Sussex
- Cover
- One year on every job
- Price
- A clear price before we start
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Also near Washington
What else we do in Washington
When it is not the sealant
New sealant cannot fix everything, and we’d rather say so up front. Sealant will not put right:
- A leaking shower valve or waste
- Tiles that have come away from the wall
- Movement in a stud wall or floor
If you are not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Where we work in Washington
- Wet rooms
- Bathroom floors
- Tiled floors
- Shower walls
- Kitchen splashbacks
- Bathroom wall tiles
Bathrooms and kitchens in Washington
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Homes close to The Parish Church of St Mary include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Washington is about 6 miles north of Worthing, in West Sussex. For regrouting in and around Washington, it’s easy to get a quote: please call 0345 464 0079 or email us. We’re based in Crawley and cover West Sussex. 371 places in West Sussex are on our list, from the larger towns to small villages. You can also see our page for Brighton, roughly 13 miles from Washington.
Postcode districts we cover here for regrouting: RH20. If you need regrouting at a property on London Road, The Street and Chanctonbury Close or anywhere close by, we can help. We also cover the places around Washington: Rock (1 mile north), Sullington (1 mile west), Heath Common (2 miles north-west), Storrington (2 miles north-west) and Warminghurst (2 miles north). Larger places within reach include Horsham (12 miles north), Worthing (6 miles south), Bognor Regis (15 miles south-west), Haywards Heath (15 miles north-east), Burgess Hill (13 miles east) and Littlehampton (8 miles south-west).
Around Washington
Locally, jobs take us to homes and businesses close to Rydon Community College, Windlesham House School and The Frankland Arms Public House, among other places. Other landmarks nearby include The Storrington And District Museum (2 miles north-west). Not far away are Chanctonbury Hill.
Should I try it myself first?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
How the visit works
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a few hours, or longer for a fully tiled room. In a small place like Washington, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- Every tile area is checked for hollow or loose tiles first.
- We rake out the grout evenly, protecting the tile edges.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
Preparing for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Keep children and pets away from the work area
- Tell us about any previous sealing or DIY attempts
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Advice
Landlord and commercial work in Washington
We also work for property managers and facilities teams in Washington and across West Sussex. We can quote a run of properties together, and we are fully insured.
We work for landlords and agents as well as householders. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
What happens if it’s left?
Colouring the surface of old grout is a quick cosmetic fix. They don’t fill cracks or stop water and stains often come back through. A proper regrout puts new grout in the joint. Where a wall is exposed, as many are in small places like Washington, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Why book with us
- Tidy, careful work
- Approved under the ARBOMaster scheme
- A 12-month guarantee on all work
- Rated 4.9 stars on Google
Take a look at how sealant jobs are priced or our reviews.
Common questions in Washington
Can you do regrouting in Washington?
Yes. We work across London and the South East, and Washington is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear quote.
Is Washington within the area you cover?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you work on commercial sites?
Yes. Larger jobs can be planned room by room or area by area.
Where are you based?
Our base is Crawley. Our area covers South East England, London and Scotland.
Can new sealant go over the old?
No, because it fails. The old sealant always comes out first.
Do you remove the old sealant?
Yes, always, and completely. New silicone does not stick to old silicone, so the joint is cleaned back first.
What does regrouting cost?
Size, access and the old material all affect the cost. Ask us for a quote.
How long does regrouting take?
Most jobs take anything from a few hours to a full day, depending on the area. We’ll confirm how long when we quote.
How we quote for regrouting
Call for a quick quote. What matters most is:
- How many areas need sealing
- When we can work, for business premises
- The type of sealant required
- The old material and how stubborn it is
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we will go through it with you.
Helping us quote
When you contact us, these details help:
- Pictures of the joints, sent by email
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
- Any previous sealing or DIY work
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand.