South Lanarkshire · Scotland
Regrouting in St Leonards, South Lanarkshire
Tiled areas in St Leonards need attention? We cut out the old, prepare the joints and apply the right sealant.
- Dirty, worn grout on a tiled floor
- Old grout in a dated colour
- Grout that makes sound tiles look old
When to call us in St Leonards
Poor ventilation keeps grout damp, and damp grout is where mould grows. When black spots keep returning, the mould has generally got into the grout.
Common reasons people contact us are:
- Splashback grout that has darkened
- Discoloured grout on otherwise sound tiles
- Grout stained black or orange that won’t clean
- Shower grout that has worn away
Rented homes near East Kilbride station change hands often, and clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Comparing quotes
- What preparation is included
- Whether the sealant suits the joint
- Whether they’re fully insured
- What the cure time is
Regrouting in St Leonards
Changing the grout colour is a simple way to update tiles. You might go from white to grey or back again. Tell us what you have in mind when you ask for a quote. We work on kitchen splashbacks, tiled floors and bathroom wall tiles, and people most often call us about a grout colour that no longer suits the room and gaps where the shower grout has gone.
Bathrooms in smaller places like St Leonards work just as hard as those in the cities. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
Whatever the size of the job, you get the same one-year guarantee in St Leonards and across South Lanarkshire.
- Place
- St Leonards (G74, G75)
- Wider area
- South Lanarkshire
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Regrouting in St Leonards: local notes
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Managing a site like Calderglen High School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
St Leonards is about 2 miles east of East Kilbride, in South Lanarkshire. Anywhere in G74, we can carry out regrouting at your property. Our area takes in 139 places across South Lanarkshire. There’s also a page for Glasgow, about 8 miles away.
Every address in G74 and G75 is within our area for regrouting, from the main roads to the quietest streets. Streets in the area include Deveron Road, Spean Avenue and Angus Avenue, all of which we cover. Close by, we work in Birniehill (1 mile south-west), East Mains (1 mile west), The Village (1 mile west), West Mains (1 mile west) and The Murray (1 mile west). Larger places within reach include Hamilton (4 miles east), Cambuslang (4 miles north), Uddingston (5 miles north-east), Blantyre (3 miles north-east), Larkhall (7 miles east) and Carluke (13 miles east).
What’s near St Leonards
Locally, jobs take us to homes and businesses close to Mount Cameron Primary School and The Hay Stook pub and the streets around them. For rail, the closest station is East Kilbride station, about 1.1 miles west of the centre. Well-known places in the area include Hairmyres Hospital (2.6 miles west) and East Kilbride Shopping Centre (0.9 miles west). Green spaces nearby include Cathkin Braes.
How the visit works
You do not need to clear the whole room or building, only the area right around the joints. We protect the rest, and the work takes a few hours, or longer for a fully tiled room for a typical job. Outside jobs in St Leonards need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We check the tiles for any that are hollow or loose.
- We rake out the grout evenly, protecting the tile edges.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
How to prepare
- For business premises, tell us about site rules or sign-in
- Tell us about any water getting in
- Mention any parking rules near the property
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. Whenever you’re ready, drop us a line at info@mrmastic.co.uk.
Advice
For landlords and businesses
In hotels, rooms out of use cost money, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Also near St Leonards
Other services in St Leonards
Your questions about regrouting in St Leonards
Do you cover smaller places like St Leonards?
Yes. St Leonards is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near East Kilbride station?
Yes. We work for landlords and letting agents as well as householders, and several properties can be quoted together. You can send an email to info@mrmastic.co.uk with the details for a clear quote.
Is resealing included with regrouting?
Yes, in most cases. Fresh grout next to old, mouldy silicone would look odd and wouldn’t keep water out.
Will there be a smell?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
Can you regrout if a few tiles are loose?
If tiles are loose, something behind them has usually failed. Grout on its own will not fix that and we will say so before going ahead.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Is the work guaranteed?
Every job comes with our one-year guarantee.
Surface by surface
Wet rooms
In a wet room, the whole floor gets wet, so good grout is important. We check for loose tiles before starting.
Bathroom floors
New floor grout makes a big difference to how a bathroom looks. The edges where floor meets wall or bath get silicone.
Quotes for regrouting in St Leonards
You will get a clear quote before we start. It takes into account:
- The number and length of the joints
- Whether the work is at height
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
What we need to know
When you contact us, these details help:
- Where the property is
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
- How we’d reach the joints
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.
When it is not the sealant
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- Waterproofing that has failed below the tiling
- A floor or wall that keeps moving
- Tiles that are loose or hollow behind
If in doubt, email us at info@mrmastic.co.uk and we will say what we think.
What we seal
- Tiled floors
- Bathroom wall tiles
- Bathroom floors
- Shower walls
- Kitchen splashbacks
- Wet rooms
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.