Greater London · England
Regrouting in Silvertown
Regrouting for Silvertown, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Old grout in a dated colour
- Greasy, stained grout behind the hob
- Stained grout that cleaning won’t shift
What we do, step by step
We bring everything the job needs with us. Once we’ve agreed what’s being done, the area is protected and the work begins. It normally takes a few hours for a shower enclosure, longer for a whole room. In Silvertown, as in most of London, parking needs a little planning. A visitor permit or a nearby bay makes the visit run more smoothly.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- The new grout goes in, then the tile faces are cleaned.
- We renew the silicone at the corners and edges.
Getting ready for the visit
- Let us know about parking restrictions
- Mention if the joints have been sealed before
- Let us know if you’ve seen damp or leaks
Getting a quote
Every job is quoted individually, so start by telling us what you need. Just phone 0345 464 0079 or email us with the details, and pictures are welcome.
Read more
About our regrouting in Silvertown
Grout is the filler between your tiles, while sealant goes where tiles meet a bath, tray or worktop. Once grout starts to crack or wash away, water can get in behind the tiles. We rake it out and replace it and renew the silicone at the edges. If you have grout that makes sound tiles look old and stained grout that cleaning won’t shift, we can help, on tiled floors, wet rooms and shower walls alike.
Hard London water leaves limescale on sealant, grout and taps alike. In Silvertown, regrouting is as much about a room looking cared for as about keeping water out.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Place
- Silvertown (E16, SE10, SE7)
- Region
- Greater London
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Regrouting around Silvertown
London’s water is hard, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in. London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, which is why it’s worth fixing early.
Schools such as Britannia Village Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Rented homes near Custom House station change hands often, and a regrout while the flat is empty is quicker than working around a tenant. Silvertown is in London, so parking needs planning: let us know about parking bays, permits or a driveway.
Silvertown is about 1 mile south of Canning Town, in Greater London. We provide regrouting to homes and businesses in Silvertown, as part of our work across Greater London. Our Greater London coverage runs to 764 places, Silvertown among them.
All of E16, SE10 and SE7 is within our area for regrouting. You will find streets such as Booth Road, Thames Road and Knights Road, and we cover them all. Nearby, we also carry out regrouting in West Silvertown (1 mile north-west), Custom House (1 mile north), Royal Docks (1 mile north-east), Canning Town (1 mile north) and Limmo Peninsula (1 mile north-west). Within a short drive, we also cover London (5 miles west), City of Westminster (8 miles west), Marylebone (8 miles west), Kensington (10 miles west), St Pancras (7 miles west) and Shoreditch (5 miles west).
What’s near Silvertown
Locally, jobs take us to homes and businesses close to Anchor & Hope pub, Thames Barrier Park and The Royal Docks Community School. The closest station to Silvertown is Custom House station, roughly 0.7 miles north of the centre. Nearby you’ll also find Charlton Athletic Museum (1 mile south) and Gallions Reach Shopping Park (2.3 miles east). Open spaces near Silvertown include Tower Hill and Gilbert's Pit.
Places near Silvertown
Also in Silvertown
Landlord and commercial work in Silvertown
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
Letting agents and landlords in Silvertown can book us as well as householders. Resealing between tenancies keeps a property looking cared for before the next move-in.
Silvertown: your questions answered
I let a flat near Custom House station. Can you help?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can be quoted together. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Could a tired shower seal in my Silvertown flat affect the neighbours below?
Yes, it can. Water that gets past failed sealant or cracked grout can run under the bath or tray and show up on the ceiling below. Replacing the sealant and grout before that happens is much less trouble than repairing a neighbour’s ceiling.
Do you reseal at the same time?
Normally, yes. The corners and edges should be silicone, and it makes sense to renew both together.
Can new sealant go over the old?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we’re using and why.
How much does regrouting cost in Silvertown?
Size, access and the old material all affect the cost. Call for a quick quote and we will talk you through it.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Can you regrout just the shower?
Yes. Many jobs are just the shower walls, or the area where the grout has gone.
Surface by surface
Kitchen splashbacks
A splashback can be regrouted without touching the worktop. The worktop edge is finished with silicone.
Bathroom floors
New floor grout makes a big difference to how a bathroom looks. Floor-to-wall and bath joints are sealed, not grouted.
When something else is needed
We will not take on work that won’t last, so these are the limits:
- Failed tanking or waterproofing under the tiles
- Movement in a stud wall or floor
- Damaged tiles that need replacing
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly before you book.
What we seal
- Kitchen splashbacks
- Shower walls
- Bathroom floors
- Tiled floors
- Wet rooms
- Bathroom wall tiles
What happens if it’s left?
Colouring the surface of old grout is a quick cosmetic fix. They will not fill gaps or keep water out and stains often come back through. Raking out and regrouting replaces the grout itself. In London conversions, one flat’s bathroom is often above another flat’s ceiling, and a slow leak from a failed seal can end up in the flat below. Putting it right early is much less trouble for homes in Silvertown.
What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before we start.
What you get with us
- Arbo and Everbuild products
- Fully insured
- One-year guarantee on every job
- 20+ years of sealant experience
Read how sealant jobs are priced and customer reviews.
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Quotes for regrouting in Silvertown
Every job gets its own quote. This is what makes a difference:
- Any mould that needs treating
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
- The product the joint needs
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Asking for a quote
Photos help, but a description is a good start. Try to tell us:
- If someone has resealed it before
- How we’d reach the joints
- Roughly how big the job is
- Where the property is
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand.