Greater London · England
Regrouting in Roxbourne, Greater London
Our applicators work in Roxbourne on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly.
- Floor grout that has worn and darkened
- Cracked grout along the bath or tray
- Discoloured grout on otherwise sound tiles
How the visit works
The work is kept neat and contained to the area we are working on, so you can get on with your day. The job generally takes a few hours for a shower enclosure, longer for a whole room, and we tell you how long to leave it before we go. In a London area like Roxbourne, the main things to plan are parking and access: tell us about permits, visitor bays or off-street space, which floor we’re working on and whether there’s a lift.
- We check the tiles for any that are hollow or loose.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
Getting ready for the visit
- Let us know about stairs, lifts or work at height
- Let us know if you’ve seen damp or leaks
- On commercial sites, let us know about site rules
Getting a quote
Need a quote? Please phone 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
Regrouting in Roxbourne, done properly
Before we start, the tiles are checked. If any tiles are loose or sound hollow, we tell you, since new grout cannot fix a problem underneath. With sound tiles, regrouting is a tidy, lasting improvement. We are often asked to deal with cracked grout along the bath or tray and splashback grout that has darkened, on shower walls, bathroom wall tiles and tiled floors.
Much of London’s older housing is Victorian and Edwardian terraces, many of them now split into flats, with bathrooms fitted into whatever space was available. A compact bathroom that steams up every day is hard on silicone and grout, and homes in Roxbourne are no different.
You’re covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or drop us an email.
- Place
- Roxbourne (HA5, HA2, HA4)
- Wider area
- Greater London
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Do you need regrouting in Roxbourne?
Grout that was put in corners cracks because those joints flex. Those joints should be silicone, and if they’re grouted, a crack soon lets water in.
People usually contact us after spotting something like this:
- Cracked or crumbling grout lines
- Floor grout that will not come clean
- Shower grout that has worn away
- Corners filled with grout instead of silicone
Roxbourne is in London, so parking needs planning: tell us about permits, visitor bays or off-street space when you book.
Questions to ask before booking
- What the quote includes, VAT included or not
- How the colour is chosen
- What preparation is included
- How much experience the applicator has
For landlords and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
If you manage several properties in or around Roxbourne, several properties can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
How the job changes by surface
Kitchen splashbacks
Kitchen grout collects grease and food splashes. Once it’s stained, new grout is often the only fix.
Corners and edges
Internal corners move, so they get silicone, not grout.
Also near Roxbourne
What else we do in Roxbourne
Your questions about regrouting in Roxbourne
Can parking be tricky for a visit in Roxbourne?
In much of London, parking needs planning: a visitor permit or a bay close to the door helps a lot, so mention what’s available when you book.
Can you help a landlord with a rental near South Ruislip station?
Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.
Where do you work from?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Do you do commercial work?
Yes. We have worked for hotels, offices and other businesses.
Are you fully insured?
Yes. We’re fully insured.
Is it OK to seal over old sealant?
No, it won’t last. It may look fine at first, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Do you work in Roxbourne?
We do. Our applicators work in Roxbourne, and the service is the same as everywhere else.
Will regrouting fix loose tiles?
Loose tiles need refixing before regrouting. We will point them out before any grout comes out.
What affects the quote in Roxbourne
The quote reflects the job in front of us. We take into account:
- Mould in or behind the old joints
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
- Which sealant suits the joint
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, call 0345 464 0079 or send us an email and we will give you an honest view and a quote.
Helping us quote
When you contact us, these details help:
- The rough size of the job
- The address or postcode of the job
- If it’s domestic, commercial or a hotel
- What’s wrong with the joints now
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Roxbourne homes and their sealant
London’s water is hard, which leaves limescale on sealant, grout and taps. London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, so tired sealant is best dealt with early.
Schools such as The Moriah Jewish Day School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Letting a property close to South Ruislip station? Then a regrout while the flat is empty is quicker than working around a tenant.
Roxbourne is about 1 mile east of Ruislip, in Greater London. Jobs in Roxbourne get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Across Greater London, we cover 764 places, and Roxbourne is one of them. For nearby work, see our London page.
Every address in HA5, HA2 and HA4 is within our area for regrouting. We cover properties on Kings Road, The Avenue and Torbay Road and the roads around them. Nearby, we also carry out regrouting in Rayners Lane (1 mile east), Eastcote (1 mile north-west), North Harrow (1 mile north-east), South Ruislip (1 mile south) and Pinner (1 mile north). Further out, we also cover London (13 miles south-east), City of Westminster (11 miles south-east), Marylebone (11 miles east), Kensington (9 miles south-east), St Pancras (12 miles east) and Shoreditch (14 miles east).
Around Roxbourne
In Roxbourne, that means homes and buildings near Heathfield School, Pinner High School and Venue 5 pub and the streets around them. For rail, the closest station is South Ruislip station, roughly 1.4 miles south-west of the centre. A little further out are Heath Robinson Museum (1.2 miles north) and St. George's Shopping Centre (1.9 miles east). For a walk, there’s Northala Fields and Islip Manor Meadows.
Looking after it afterwards
Looking after new joints is easy:
- Avoid neat bleach and strong acid descalers on grout
- Use a squeegee on the tiles after showering
- Rinse the tiles after showering
- Clean grout with a mild bathroom cleaner
Have any tile that moves checked straight away. Movement will crack the new grout and lets water in.
Grout that stays dark after cleaning is starting to fail. Regrouting at this stage is straightforward, before the joints open up.