Highland · Scotland
Melness Regrouting
Regrouting across Melness and nearby, with old sealant always removed completely and a 12-month guarantee.
- Shower grout that has worn away
- Splashback grout that has darkened
- Grout in corners that has cracked
How we handle regrouting in Melness
Changing the grout colour is a simple way to update tiles. You might go from white to grey, or the other way round. Tell us what you have in mind when you ask for a quote. If you have greasy, stained grout behind the hob and grout stained black or orange that won’t clean, we can put it right.
A bathroom in a place like Melness gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
Whatever the size of the job, you get the same 12-month guarantee.
- Location
- Melness (IV27)
- Region
- Highland
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026

Landlords, agents and businesses in Melness
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can go on one quote.
Landlords and agents in Melness can book us as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.
Towns and villages near Melness
What else we do in Melness
Common problems we fix in Melness
A bathroom that stays damp keeps the grout wet, and damp grout is where mould grows. Black marks that come back after cleaning are often in the grout itself.
Look out for these signs:
- Discoloured grout on otherwise sound tiles
- Corners filled with grout instead of silicone
- Grout that is cracking and breaking up
- Floor grout that has worn and darkened
Around Melness, as everywhere, regrouting is only as good as the preparation behind it.
What to look for in a quote
- Whether they’re fully insured
- What guarantee comes with the work
- What product goes in the joint
- Is the old sealant removed completely?
What regrouting looks like in Melness
Melness is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Whether the job is in Melness itself or nearby, the right material for each joint matters as much as a neat finish.
Melness is about 33 miles west of Thurso, in Highland. If you need regrouting in Melness, please drop us a line at info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover Highland. Our Highland coverage runs to 253 places, Melness among them.
Postcode districts we cover here for regrouting: IV27. Regrouting is available to properties on Cornhill Road and Joseph Mackay Court. Close by, we work in Tongue (4 miles south), Am Blàran Odhar (7 miles east), Smoo (11 miles west), Diuranais (12 miles west) and Strathy (15 miles east). If you are somewhere remote, the job takes a little more planning.
Around Melness
Other landmarks nearby include Castle Varrich (3.6 miles south). Not far away are Cnoc an Fhreiceadain and An Dubh-loch.
How to look after the new joints
A little care helps the new joints last. We recommend:
- Rinse the tiles after showering
- Clean with a soft brush, not anything metal
- Use a squeegee on the tiles after showering
- Check the corner silicone every few months
Leave the area unused for as long as we advise, so it can harden properly. From then on, a quick rinse after showering helps and let the room air.
Cracked grout does not stay cracked for long. Water gets behind the tiles, and they can begin to come away and early regrouting can avoid a much bigger job.
Common questions in Melness
What guarantee comes with regrouting in Melness?
Every job comes with our 12-month guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Can you do regrouting in Melness?
Yes. We work across all of Scotland, and Melness is part of that. You can send an email to info@mrmastic.co.uk and tell us what needs doing.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and you will get one quote.
How long will you be here?
Typically it takes a few hours for a shower enclosure, longer for a whole room. Larger jobs naturally take longer.
Are you an approved applicator?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Do I have to be there?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Is it possible to regrout only the shower area?
We can. We’ll look at the rest of the room too and tell you if anything else needs attention.
How the visit works
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. In total, it usually takes a few hours, or longer for a fully tiled room. Around Melness, distance and access matter more than parking. Tell us how to find the property and how to reach the work.
- First we agree what’s being done and flag any loose tiles.
- Grout is raked out without chipping the tiles.
- The joints are cleaned out and vacuumed.
- We grout the joints and wipe the tiles clean.
- Internal corners and edges are resealed.
Getting ready for the visit
- Clear items away from the joints we are working on
- Let us know about stairs, lifts or work at height
- For business premises, tell us about site rules or sign-in
How to get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Read more
What affects the quote in Melness
Call for a quick quote. What matters most is:
- How many areas need sealing
- How much old sealant there is and how hard it is to remove
- The size of the job
- Access and height
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
Photos by email are helpful but not essential. Please mention:
- Photos by email, if that’s easy
- If it’s domestic, commercial or a hotel
- How many joints, rooms or windows are involved
- How we’d reach the joints
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved and give you a clear price.
When it isn’t the sealant
In fairness, there are a few things sealant will not fix:
- Water coming from plumbing rather than grout
- Tiles that are loose or hollow behind
- Waterproofing that has failed below the tiling
If you are not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer.
Surfaces we seal
- Bathroom wall tiles
- Tiled floors
- Wet rooms
- Shower walls
- Kitchen splashbacks
- Bathroom floors
Different surfaces, different methods
Bathroom wall tiles
Grout by the basin and bath tends to mark first. We can do part of a wall or all of it.
Bathroom floors
If floor grout keeps cracking, the floor may be moving. We check the tiles before regrouting.
