Highland · Scotland
Window & door mastic in Melness, Highland
Window mastic in Melness from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Gaps between the frame and the inside reveal
- A bead that doesn’t match the frame
- Gaps where the sill meets the wall
Leave it or put it right?
Redecorating is a good moment to renew the mastic. Fresh joints finish the job neatly, and it’s easier while the walls are being worked on anyway. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we will explain the quote if you ask.
Why us?
- Tidy, careful work
- ARBOMaster approved applicator
- Over 20 years’ experience
- Arbo and Everbuild products
Read our cost guide or our reviews.
Window mastic in Melness
Behind a thin line of old mastic there’s sometimes a deep void. Packing it solid with sealant gives a joint that can’t flex, so we fit backing rod to set the right depth. That way the new bead bonds to the frame and the wall only. We work on uPVC windows, patio & French doors and window sills, and common reasons people get in touch are hard, cracked sealant around windows and old mastic that has gone black or come away.
Mastic can only go onto a dry joint, so outside work in Melness depends on the weather. Tell us about access to all the windows and doors, upstairs included.
You’re covered for a year from the day we finish. If there’s a problem with it, please send an email to info@mrmastic.co.uk.
- Where
- Melness (IV27)
- Wider area
- Highland
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What happens on the day
You do not need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the job takes anything from an hour or two to a full day, depending on how many frames there are in most cases. For a place like Melness, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First, we go round the frames with you and agree the list.
- The old mastic is cut out and scraped back to clean surfaces.
- Deep gaps get closed-cell backing rod to set the depth.
- The new sealant goes on in white, brown, anthracite grey, black or clear to suit.
- Every joint is tooled smooth and checked before we leave.
Before we arrive
- Let us know about earlier repairs to the joints
- Tell us about access, such as stairs, a lift or high-level joints
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
We quote each job on its own, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details and send photos if you have them.
Advice
Frames and glazing around Melness
Melness is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on the mastic around window and door frames, especially on the side facing the sea. The west of Scotland is wetter than the east, which means the mastic around window and door frames has to cope with a lot of rain.
For jobs in and around Melness, choosing the right material for each joint is as important as a tidy finish. Around Melness, as everywhere, window mastic is only as good as the preparation behind it.
Melness is about 33 miles west of Thurso, in Highland. From the centre of Melness to the outskirts, window mastic is available for homes and businesses alike, from flats and houses to offices and hotels. We cover 253 towns and villages across Highland, large and small.
Every address in IV27 is covered for window mastic. Whether your property is on Cornhill Road and Joseph Mackay Court or anywhere close by, we can help. We also cover the places around Melness: Tongue (4 miles south), Am Blàran Odhar (7 miles east), Smoo (11 miles west), Diuranais (12 miles west) and Strathy (15 miles east). Island and remote addresses take a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.
Near you in Melness
Nearby you will also find Castle Varrich (3.6 miles south). The countryside around Melness includes Cnoc an Fhreiceadain and An Dubh-loch.
Keeping the joints in good condition
How long the joints last depends on use and care. We suggest:
- Don’t paint over the silicone
- Repaint timber before it’s bare
- Don’t use solvent cleaners on the joint
- Make sure the drainage slots aren’t blocked
Most silicone sealants won’t take paint, so if you’re planning to paint the frames or walls, tell us beforehand. We can use a paintable sealant where that matters.
A failed joint lets water into the wall a little at a time. Often the first sign is a damp patch inside or flaking paint on the reveal. Early resealing stops it reaching that point.
Landlord and commercial work in Melness
If you manage several properties in or around Melness, several properties can be quoted together. Send us the addresses and the work at each.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
What we can’t put right
To be straight with you, there are a few things sealant will not fix:
- A frame that has rotted at the joint
- Draughts through the window seals rather than the frame
- Damp coming through the wall itself rather than the frame joint
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
What we seal
- Composite doors
- Patio & French doors
- Window sills
- Aluminium frames
- Timber windows & doors
- uPVC windows
Surface by surface
uPVC windows
Plastic frames move a lot between a hot afternoon and a cold night, so the joint needs a low-modulus sealant that stays flexible. We match white, brown, anthracite grey and black frames.
Composite doors
Composite doors are normally hung in an uPVC-type frame, so its perimeter joint is sealed much like a window. The bead is colour-matched to the frame.
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Also near Melness
Also in Melness
Common questions in Melness
Can you do window mastic in Melness?
Yes, Melness is within the area we cover. Our work covers the whole of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we will give you a clear quote.
Is Melness within the area you cover?
Yes. Melness is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
What information do you need?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
How much does window mastic cost in Melness?
It depends on the job, so we quote each one individually. For a quick quote, send an email to info@mrmastic.co.uk and tell us what needs doing and where.
Can you do several jobs on one visit?
Yes. Several rooms, windows or areas can go on one quote.
Will you leave a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Will new mastic stop draughts?
Often, yes. Air often gets in between the frame and the wall, and resealing inside and out closes it.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.