Highland · Scotland
Floor Joint Sealing in Melness
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homes and businesses in Melness and across Highland. Fully insured, ARBOMaster approved and guaranteed for a year.
- Gaps opening between the floor and skirting
- Threshold joints that have opened or worn
- Failed seals where bathroom floors meet baths and panels
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Vacuum floor joints regularly to stop grit building up
- Check skirting joints after the heating season
- Keep floor cleaning water to a minimum at the edges
- Check the sealant is paintable before decorating
In commercial units, keep pallet trucks and heavy wheels off new joints until they’ve cured. Cone off the area if needed while it cures.
Concrete joints damaged by traffic get worse quickly. Early resealing helps keep the joint intact.
Floor joint sealing for homes and businesses in Melness
A threshold joint has to cope with feet, movement and sometimes water. We seal them with a flexible sealant suited to the floor finishes either side. We work on concrete floor joints, thresholds and skirting boards, and common reasons people get in touch are open joints that fill with dirt and caulk that has cracked where the floor moves.
Around smaller Scottish places like Melness, new homes tend to be single plots or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Melness (IV27)
- Region
- Highland
- Guarantee
- A year, on every job
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026

New homes and floors in Melness
Floors around Highland run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. The joint at the skirting or threshold has to allow for that. Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.
Whether the job is in Melness itself or nearby, the right material for each joint matters as much as a neat finish.
Melness is about 33 miles west of Thurso, in Highland. Our applicators cover floor joint sealing for homes and businesses in Melness and the surrounding area, as part of our work across Highland. Our area takes in 253 places across Highland.
Our applicators cover all of IV27 for floor joint sealing. Streets in the area include Cornhill Road and Joseph Mackay Court, and we cover them all. Other places close to Melness include Tongue (4 miles south), Am Blàran Odhar (7 miles east), Smoo (11 miles west), Diuranais (12 miles west) and Strathy (15 miles east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Near you in Melness
Well-known places in the area include Castle Varrich (3.6 miles south). Not far away are Cnoc an Fhreiceadain and An Dubh-loch.
What affects the cost of floor joint sealing
Your quote is based on your job. We take into account:
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
- The number and length of the joints
- The type of sealant required
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
What to tell us for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Any access issues, like height or stairs
- What’s wrong with the joints now
- Any previous sealing or DIY work
- The type of property
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work and give you a clear quote.
Work for landlords, hotels and businesses
For anyone letting property in or around Melness, several properties can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together, and we are fully insured.
FAQs for Melness
Is Melness in your area for floor joint sealing?
Yes, Melness is within the area we cover. Our work covers the whole of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Is floor joint sealing in Melness guaranteed?
All our work, in Melness and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
How long before the joint can take traffic?
It depends on the product and the conditions. We give you the times for walking, cleaning and traffic when we finish so you can plan.
Will I be able to paint over the new joint?
On joints you want to paint, yes. Silicone does not take paint so mention it when you get a quote.
Can you seal where the floor meets the bath panel?
Yes. The old joint comes out and a flexible silicone replaces it.
Is it messy?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Do you have insurance?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
Nearby places to Melness
Other services in Melness
What sealant work cannot fix
We’ll always be straight with you, so here’s what sealant cannot fix:
- A tiled floor that needs relaying
- Structural movement or subsidence
- Damaged concrete that needs breaking out and repairing
If you are not sure, just send an email to info@mrmastic.co.uk and we’ll give you a straight answer before booking.
Where we work in Melness
- Tiled floors
- Wet room & bathroom floors
- Thresholds
- Skirting boards
- Commercial floors
- Concrete floor joints
How the visit works
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The work itself takes a few hours for most rooms, longer for large commercial floors. Around Melness, distance and access matter more than parking. Let us know how to find you and how to reach the joints.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- We clean and dry the edges of the joint.
- A flexible sealant suited to the floor is applied.
- Finally, we check the work and talk you through aftercare.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Let us know about earlier repairs to the joints
- For indoor joints, keep the area dry beforehand if you can
Get a quote
To get a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Advice
When to call us in Melness
Caulk is the usual filler for skirting. In a joint that moves or gets wet, it splits so the gap reappears.
The problems people generally mention when they call are:
- Caulk that has cracked where the floor moves
- Gaps between floors and kitchen plinths
- Tiled floors with no room to move
- Gaps opening between the floor and skirting
In and around Melness, as anywhere, good floor joint sealing starts with a clean, dry, properly prepared joint.
Questions to ask before you book
- What the quote includes, VAT included or not
- How long to leave it before use
- Which sealant they’ll use, and why
- What happens if the job turns out different
Surface by surface
Wet room and bathroom floors
In a wet room, the floor-to-wall joint is a key line of defence. We reseal it with a flexible silicone suited to wet areas.
Concrete floor joints
We clean concrete joints out thoroughly before sealing. Backing goes in where the depth needs controlling.
