Highland · Scotland
Strathy Floor Joint Sealing
Floor joints in Strathy need attention? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Grout cracking in a straight line across a floor
- Grout used at the floor edge instead of sealant
- Failed seals where bathroom floors meet baths and panels
Floor joint sealing in Strathy, done properly
Large tiled floors, and those over underfloor heating, often need movement joints. We can turn a line of grout into a movement joint by replacing it with flexible sealant. If you are dealing with caulk that has cracked where the floor moves and grout cracking in a straight line across a floor, we can put it right.
New homes in smaller Scottish places are often single plots, self-builds or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.
All our work comes with our one-year guarantee, wherever you are in Highland.
- Location
- Strathy (KW14)
- Wider area
- Highland
- Cover
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Strathy: your questions answered
Do you cover smaller places like Strathy?
Yes, Strathy is covered. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you cover Strathy for floor joint sealing?
Yes. Our work covers the whole of Scotland, and Strathy is part of that. Just email us at info@mrmastic.co.uk with a few details of the job, and we will send you a clear quote.
Do you seal kitchen plinths to the floor?
Yes. These joints get wet every time the floor is cleaned, so a flexible silicone is the right choice.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Can you add a movement joint to a tiled floor?
Usually, yes. Straight cracks in grout often show where a movement joint was needed. We replace that grout with a flexible joint.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Will I be able to paint over the new joint?
Where the skirting will be painted, we can use a flexible sealant that takes paint. Silicone is not made to be painted, so it’s kept for wet areas and unpainted joints.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints, and we clear up when we’re done.
How the visit works
You don’t need to clear the whole room or building, only the area right around the joints. We protect the rest, and the work takes a morning or an afternoon for most homes for a typical job. For a place like Strathy, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We start by checking the floor, the joint and what traffic it takes.
- Any old caulk, grout or sealant is raked or cut out.
- We vacuum out the joint and add backing where the depth needs setting.
- The chosen sealant goes in, coloured to suit the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Preparing for the visit
- Tell us if parking is tricky
- Mention any tricky access
- Move anything stored near the joints
How to get a quote
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, send an email to info@mrmastic.co.uk.
Advice
Landlord and commercial work in Strathy
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
How the job changes by surface
Thresholds
A threshold is where floors and frames meet. A flexible sealant suits both floor finishes.
Concrete floor joints
We clean concrete joints out thoroughly before sealing first. Backing goes in where the depth needs controlling.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. Our tips:
- Keep caulk for dry, still joints only
- Do not slide heavy items over sealed joints
- Keep dirt out of the joints
- Use a well-wrung mop rather than flooding the floor
Lift furniture rather than sliding it over sealed joints. Dragging can tear the bead before it has fully cured.
Concrete joints damaged by traffic get worse quickly. Early resealing helps keep the joint intact and the surface smoother.
Also near Strathy
What else we do in Strathy
How we quote for floor joint sealing
The quote reflects the job in front of us. We look at:
- Mould in or behind the old joints
- Any working-time requirements on site
- The amount of work
- Access and height
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, email us at info@mrmastic.co.uk for an honest opinion and a quote.
What we need to know
When you contact us, these details help:
- A few pictures by email, if you can
- Any previous sealing or DIY work
- Whether it’s a home or a business
- Access, such as stairs, a lift or height
To get a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Can I do it myself?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
When to call us in Strathy
When a tiled floor has no movement joints, the grout takes the strain. Cracks often run straight along a line of joints, where a flexible joint should have been.
Most people get in touch after spotting something like this:
- Gaps opening between the floor and skirting
- Floor edges that trap water and grime
- Threshold joints that have opened or worn
- Rigid edge joints in tiled floors
In and around Strathy, as anywhere, good floor joint sealing starts with a clean, dry, properly prepared joint.
What your quote should include
- What preparation is included
- Whether you can choose the colour
- Whether the sealant suits the joint
- How hidden problems are handled
New homes and floors in Strathy
Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up. Across Highland, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
Whether the job is in Strathy itself or nearby, the right material for each joint matters as much as a neat finish.
Strathy is about 17 miles west of Thurso, in Highland. Jobs in Strathy get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. We cover 253 towns and villages across Highland, large and small.
Work in KW14 is quoted and booked the same way as anywhere else. Nearby, we also carry out floor joint sealing in Portskerra (3 miles east), Melvich (3 miles east), Reay (8 miles east), Am Blàran Odhar (8 miles west) and Forss (13 miles east). Island and remote addresses take a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.
Local landmarks in Strathy
Green spaces nearby include Lochan Ealach.