Argyll and Bute · Scotland
Regrouting in Kingarth, Argyll and Bute
Raking out old, cracked or stained grout and regrouting tiled walls and floors for Kingarth, backed by a 12-month guarantee. Call for a quick quote.
- Old grout in a dated colour
- Corners filled with grout instead of silicone
- Grout washed out of a shower
Work for landlords, hotels and businesses
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Regrouting in Kingarth
Most regrouting jobs include resealing too. Grout is for the joints between tiles, but internal corners and edges flex, so they need flexible silicone instead. Renewing both together means nothing is left half-done. Typical jobs include shower grout that has worn away and stained grout that cleaning won’t shift, across shower walls, kitchen splashbacks and bathroom floors.
Being further from a city does not change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. The journey and access are simply planned in advance.
Big or small, you get the same one-year guarantee in Kingarth and across Argyll and Bute.
- Where
- Kingarth (PA20)
- Region
- Argyll and Bute
- Guarantee
- One year on every job
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
When something else is needed
A few problems are outside what sealant work can do:
- Tiles that have come away from the wall
- A structure that flexes behind the tiles
- Damaged tiles that need replacing
If you are not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer.
Where we work in Kingarth
- Tiled floors
- Wet rooms
- Bathroom floors
- Kitchen splashbacks
- Shower walls
- Bathroom wall tiles
Kingarth homes and their sealant
Kingarth is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out.
For jobs in and around Kingarth, choosing the right material for each joint is as important as a tidy finish. Around Kingarth, as everywhere, regrouting is only as good as the preparation behind it.
Kingarth is about 13 miles north-west of Saltcoats, in Argyll and Bute. Every kind of property in Kingarth can book us for regrouting. The work is guaranteed for a year. Kingarth is one of 118 places in Argyll and Bute where we work for regrouting. For nearby work, see our Glasgow page, about 30 miles away.
Every address in PA20 is covered for regrouting, from the main roads to the quietest streets. If you’re just outside Kingarth, we cover Millport (4 miles east), Rothesay (5 miles north), Craigmore (6 miles north), Ardbeg (6 miles north) and Fairlie (7 miles east). Further out, we also cover Dunoon (14 miles north), Sandbank (15 miles north) and Innellan (9 miles north). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Local landmarks in Kingarth
Nearby you’ll also find Kelspoke Castle (1.4 miles south) and Lady Margaret Hospital (4.2 miles east). Green spaces nearby include Loch Quien.
Why act early in Kingarth
Regrouting won’t help where tiles have come away. We’ll tell you before we start so you know what’s involved. On sound tiles, regrouting avoids the upheaval of a retile. In a place like Kingarth, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
Leaving a failed joint usually makes the job bigger, not smaller. If you are not sure whether it needs doing, email us at info@mrmastic.co.uk for an honest opinion and a quote.
Why choose Mr Mastic in Kingarth
- Neat joints and a tidy finish
- 20+ years of sealant experience
- Any old sealant cut out fully, not covered over
- Quality sealants from Arbo and Everbuild
Take a look at how sealant jobs are priced and our reviews.
What affects the cost of regrouting
Your quote is based on your job. We take into account:
- Whether there’s mould to deal with
- Working hours on commercial sites
- The old material and how stubborn it is
- The product the joint needs
Doing several joints on one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will give you a clear price for the lot.
What to tell us for a quote
Before you ask for a quote, have a think about:
- A few pictures by email, if you can
- What’s wrong with the joints now
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
For a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. We’ll give you a clear price before any work starts.
Common questions in Kingarth
Is Kingarth in your area for regrouting?
Yes, Kingarth is within the area we cover. We work across all of Scotland. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing, and we will give you a clear price.
Is there a guarantee on regrouting in Kingarth?
Every job comes with our 12-month guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Is it possible to regrout only the shower area?
We can. We will check the other tiled areas as well and let you know if more needs doing.
How long does the job take?
A typical job takes anything from a few hours to a full day, depending on the area, including the preparation. Your quote will say how long we expect yours to take.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status.
Can new sealant go over the old?
No. New silicone will not bond to old silicone, and it traps any mould or water underneath. It all has to come out first.
How long should I wait before showering?
You’ll get a clear time from us before we go. Both the grout and the silicone need time to cure before the shower is used.
Could my grout be a different colour after regrouting?
It can. Because the old grout is raked out, the new colour goes all the way into the joint, not just the surface.
The process
When we arrive, we start by going over the job with you. We protect the surfaces around the joints before any work begins. Most jobs take a few hours, or longer for a fully tiled room. For a place like Kingarth, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First, we check for loose or hollow tiles and point out any we find.
- We rake out the old grout to an even depth, taking care of the tile edges.
- We vacuum the joints and clean out the dust.
- We fill the joints with new grout, then clean the tiles.
- The corners and edges get new silicone, because grout there would crack.
Getting ready for the visit
- Clear items away from the joints we’re working on
- Keep pets and children clear of the area while we work
- For business premises, tell us about site rules or sign-in
Getting a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. Whenever you are ready, drop us a line at info@mrmastic.co.uk.
Related advice
What else we do in Kingarth
Surface by surface
Bathroom wall tiles
Whole bathroom walls can be regrouted in one visit or more, depending on size. You can change the colour at the same time.
Corners and edges
We reseal edges at the same time as regrouting, so everything is renewed at once.
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.