North Lanarkshire · Scotland
Kilsyth Regrouting
Tiled areas in Kilsyth need attention? We remove the old material, prepare the joints and seal them properly.
- Discoloured grout on otherwise sound tiles
- Floor grout that won’t come clean
- Grout that’s cracking and breaking up
Regrouting in Kilsyth, done properly
Stained, crumbling or cracked grout can make a sound bathroom look tired. With regrouting, the tiles stay and only the grout is renewed, so nothing is ripped out. We’re often asked to deal with dirty, worn grout on a tiled floor and grout in a colour the owner wants to change, on kitchen splashbacks, bathroom floors and bathroom wall tiles.
Bathrooms in smaller places like Kilsyth work just as hard as those in the cities. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
Each job carries a 12-month guarantee, large or small.
- Location
- Kilsyth (G65)
- Wider area
- North Lanarkshire
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Surface by surface
Bathroom wall tiles
Splash areas around basins and baths stain first. We can regroute just those areas or the whole wall.
Bathroom floors
Regrouting a floor brightens the whole room. The edges where floor meets wall or bath get silicone.
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Common problems we fix in Kilsyth
A bathroom that stays damp keeps the grout wet, and damp grout is where mould grows. When black spots keep returning, the mould has usually got into the grout.
People generally contact us when they notice something like this:
- Cracked or crumbling grout lines
- Grout washed out of a shower
- Grout in corners that has cracked
- Grout in a colour the owner wants to change
For landlords with property near Croy station, a regrout while the flat is empty is quicker than working around a tenant.
Questions to ask before you book
- Whether VAT is included
- Which sealant they’ll use, and why
- The length of the guarantee
- Are they insured?
Regrouting in Kilsyth: local notes
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
If you live in an older home near Kilsyth Parish Church, walls and floors in older homes can move, and sealant and grout show it first.
Kilsyth is about 3 miles north-west of Cumbernauld, in North Lanarkshire. We carry out regrouting for homes and businesses in Kilsyth. 89 places in North Lanarkshire are on our list, from the larger towns to small villages. Glasgow is on our list too, around 12 miles away.
Every address in G65 is covered for regrouting, from the main roads to the quietest streets. We cover properties on Main Street, Market Street and Station Road and the roads around them. With the A803 and B802 close by, Kilsyth is simple for us to get to. We also cover the places around Kilsyth: Auchinstarry (1 mile south), Croy (1 mile south-east), Queenzieburn (1 mile west), Craigmarloch (2 miles south-east) and Dullatur (2 miles east). We also work in nearby towns such as Motherwell (13 miles south), Cumbernauld (3 miles south-east), Coatbridge (9 miles south), Airdrie (8 miles south), Wishaw (15 miles south) and Bellshill (11 miles south). Kilsyth is one of the larger places we cover in North Lanarkshire.
What’s near Kilsyth
For rail, the closest station is Croy station, about 1.7 miles south-east of the centre. A little further out are Antonine Centre (3.3 miles south-east) and Kilsyth Victoria Cottage Hospital (0.5 miles west). For a walk, there’s Antermony Loch and Bar Hill.
Work for landlords, hotels and businesses
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will quote.
Kilsyth: your questions answered
Will you come out to Kilsyth?
Yes, Kilsyth is covered. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you work for landlords with property near Croy station?
Yes, rental work is part of what we do. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we’ll give you a clear quote.
Can you regrout if a few tiles are loose?
New grout cannot hold loose tiles in place. We check the tiles first and tell you if any are loose or hollow so you know where you stand.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done.
Do you regrout part of a bathroom, like the shower?
Yes, we often do. Shower grout tends to go before the rest, so many people regrout just that part.
Do you reseal at the same time?
In most cases, yes. Corners and edges need flexible silicone, and it makes sense to renew both together.
Should I try DIY first?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Are you fully insured?
Yes, we’re fully insured for domestic and commercial work.
What affects the cost of regrouting
Call for a quick quote. The main things that affect it are:
- Whether there’s mould to deal with
- How easy the joints are to reach
- The old material and how stubborn it is
- The number of rooms or windows
Doing several joints on one visit is usually more efficient than separate visits. You’ll get one clear quote for the whole job.
Helping us quote
You do not need to know the technical terms. It helps if you can tell us:
- Whether it has been sealed before
- Photos by email, if that’s easy
- Access, such as stairs, a lift or height
- What the problem is, such as mould, gaps, leaks or cracking
Every job is quoted individually, so the first step is telling us about yours. Just send an email to info@mrmastic.co.uk with the details and send photos if you have them.
What sealant work can’t fix
It helps to know what we cannot do too:
- Loose tiles, which need refixing first
- Movement in a stud wall or floor
- A leaking shower valve or waste
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer before you book.
Where we work in Kilsyth
- Tiled floors
- Shower walls
- Bathroom floors
- Kitchen splashbacks
- Bathroom wall tiles
- Wet rooms
How the visit works
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes a few hours, or longer for a fully tiled room, depending on how much there is to do. In smaller Scottish places, parking is generally less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
Before we arrive
- Keep children and pets away from the work area
- For indoor joints, keep the area dry beforehand if you can
- Clear the area around the work
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.