West Sussex · England
Regrouting in Ferring, West Sussex
Tiled areas in Ferring need attention? We cut out the old, prepare the joints and apply the right sealant.
- Splashback grout that has darkened
- Cracked or crumbling grout lines
- Grout that makes sound tiles look old
Regrouting in Ferring, done properly
Stained, crumbling or cracked grout can make a sound bathroom look tired. Regrouting replaces the grout and keeps the tiles you have, so nothing is ripped out. We work on wet rooms, bathroom wall tiles and shower walls, and the jobs we see most are floor grout that has worn and darkened and a grout colour that no longer suits the room.
In a smaller place like Ferring, homes are mostly houses and bungalows rather than flats, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
Each job carries a 12-month guarantee, large or small.
- Where
- Ferring (BN12)
- Wider area
- West Sussex
- Cover
- One year on every job
- Quotes
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026

Landlord and commercial work in Ferring
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.
What we do, step by step
On the day, we start by going over the job with you, so you know exactly what we are doing. Surfaces next to the work are protected before work begins. The work normally takes a few hours, or longer for a fully tiled room. A visit to Ferring is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- We grout the joints and wipe the tiles clean.
- We renew the silicone at the corners and edges.
Before we arrive
- Keep pets and children clear of the area while we work
- On commercial sites, let us know about site rules
- Tell us about any previous sealing or DIY attempts
How to get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that is easy.
Related advice
Regrouting in Ferring: local notes
Ferring is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Goring-By-Sea station, stained grout drags a rental down, and regrouting between lets puts that right. If you live in an older home near St Andrew's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Ferring is about 2 miles south-west of Worthing, in West Sussex. We provide regrouting to householders, landlords and businesses in Ferring and nearby. Ferring is one of 371 places in West Sussex we cover for regrouting. For nearby work, see our Brighton page (14 miles or so).
We work across BN12 for regrouting and the streets around it. Streets in the area include Pebble Lane, Ferringham Lane and Grange Park, all of which we cover. Nearby, we also carry out regrouting in Kingston Gorse (1 mile south-west), Hangleton (1 mile north-west), West Kingston (1 mile west), Goring-by-Sea (1 mile east) and Angmering-on-Sea (1 mile west). Within a short drive, we also cover Bognor Regis (10 miles west), Chichester (15 miles west), Littlehampton (4 miles west), Shoreham-by-Sea (8 miles east), Lancing (6 miles east) and Rustington (3 miles west).
Landmarks near Ferring
Typical jobs here are in homes near Durrington Minature Railway and Chatsmore Catholic High School and the streets around them. The nearest railway station is Goring-By-Sea station, roughly 0.9 miles north-east. A little further out are Rustington Museum (2.4 miles west) and Old Castle (2.6 miles north-east). Not far away are Highdown Hill.
How to look after the new joints
To keep the joints looking good and working properly:
- Keep harsh bleach and acid cleaners off the grout
- Run the extractor fan during and after a shower
- Rinse soap off the tiles after each shower
- Wipe or squeegee the shower walls
We will tell you when the area can be used again. Please follow it, and avoid scrubbing the new grout hard for the first few days.
Stains that won’t clean are a sign the grout is breaking down. Regrouting at this stage is straightforward while the tiles are still sound.
Nearby places to Ferring
Also in Ferring
Questions from Ferring
Can you help a landlord with a rental near Goring-By-Sea station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before we start.
Will you come out to Ferring?
Yes, Ferring is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
What do you put in the joint?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Where do you work from?
We’re a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Do you work for hotels and businesses?
Yes. Commercial and hotel work is a large part of what we do. We can talk about working times when we quote.
Do you guarantee regrouting?
Our 12-month guarantee covers every job.
How soon can the shower be used after regrouting?
The wait depends on the materials and how warm the room is. We’ll give you a time to follow at the end of the visit.
DIY sealant or a professional job?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Why act early in Ferring
Grouting over old grout rarely lasts. A thin skin on top tends to break off. Raking out to a consistent depth gives the new grout something to hold. Around Ferring, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote and we’ll talk you through it.
Why book with us
- Tidy, careful work
- An ARBOMaster approved applicator
- Anti-fungal sanitary silicone in wet areas
- Quality sealants from Arbo and Everbuild
Different surfaces, different methods
Bathroom floors
Regrouting a floor brightens the whole room. The edges where floor meets wall or bath get silicone.
Corners and edges
Corners flex as the building moves, so they get silicone, not grout.
Common problems we fix in Ferring
Grout that was put in corners cracks as the bath or tray moves. They need flexible sealant, and if they’re grouted, a crack soon lets water in.
The most common problems we see are:
- Grout that’s cracking and breaking up
- Greasy, stained grout behind the hob
- Discoloured grout on otherwise sound tiles
- Floor grout that won’t come clean
Schools such as Ferring CofE Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Questions to ask before you book
- Whether you can choose the colour
- What the quote includes, VAT included or not
- How much experience the applicator has
- How hidden problems are handled
