West Sussex · England
Regrouting in Kingston Gorse, West Sussex
Tiled areas in Kingston Gorse need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Floor grout that will not come clean
- Grout stained black or orange that will not clean
- Grout in corners that has cracked
How we handle regrouting in Kingston Gorse
Grout is the filler between your tiles, while sealant goes where tiles meet a bath, tray or worktop. When grout cracks or washes out, water can get in behind the tiles. Our job is to rake it out and put new grout in, then reseal the corners and edges. If you’re dealing with shower grout that has worn away and a grout colour that no longer suits the room, we can put it right, on shower walls, bathroom wall tiles and tiled floors alike.
In a village or hamlet like Kingston Gorse, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
All of our work is guaranteed for twelve months, in Kingston Gorse and everywhere else we cover.
- Where
- Kingston Gorse (BN16)
- Region
- West Sussex
- Cover
- A year, on every job
- Price
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Kingston Gorse questions
I let a flat near Goring-By-Sea station. Can you help?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we’ll send you a clear quote.
Do you cover smaller places like Kingston Gorse?
Yes. Kingston Gorse is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Are you insured?
Yes. We’re fully insured.
What information do you need?
The location, the problem and the rough size of the job. If you can, email a few photos.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises. Working times can be discussed when we quote.
Do I have to be there?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Is it possible to regrout only the shower area?
Yes. We’ll look at the rest of the room too and let you know if more needs doing.
Nearby places to Kingston Gorse
More services for Kingston Gorse
What affects the quote in Kingston Gorse
Your quote is based on your job. We take into account:
- The amount of work
- How many areas need sealing
- The old material and how stubborn it is
- Which sealant suits the joint
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we’ll go through it with you.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- If someone has resealed it before
- Where the job is, and your postcode
- How we’d reach the joints
- A few pictures by email, if you can
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you’re ready, phone 0345 464 0079 or email us.
What we cannot put right
We will not take on work that will not last, so here’s what sealant cannot put right:
- A floor or wall that keeps moving
- Tiles that are loose or hollow behind
- Water coming from plumbing rather than grout
If in doubt, phone 0345 464 0079 or send us an email and we will say what we think.
Surfaces we seal
- Bathroom wall tiles
- Tiled floors
- Bathroom floors
- Kitchen splashbacks
- Shower walls
- Wet rooms
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Looking after it afterwards
After the cure time, these simple habits help:
- Clean grout with a mild bathroom cleaner
- Avoid neat bleach and strong acid descalers on grout
- Use a squeegee on the tiles after showering
- Have loose tiles looked at early
Give the new grout the time we tell you before using the shower, so it can harden properly. After that, rinse the tiles after showering and keep the room ventilated.
Grout that stays dark after cleaning is starting to fail. At this point it’s a simple regrout, before the joints open up.
Regrouting around Kingston Gorse
Kingston Gorse is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as St Andrew's Church, walls and floors in older homes can move, and sealant and grout show it first. For landlords with property near Goring-By-Sea station, stained grout drags a rental down, and regrouting between lets puts that right.
Kingston Gorse is about 3 miles south-west of Worthing, in West Sussex. Whether you’re in the middle of Kingston Gorse or further out, regrouting is available for homes and businesses alike, from flats and houses to offices and hotels. 371 places in West Sussex are on our list, from the larger towns to small villages. You can also see our page for Brighton, about 14 miles away.
Jobs for regrouting in BN16 works the same way as everywhere else we cover. Regrouting is available to properties on Middle Way, Gorse Avenue and Sea Lane. If you are just outside Kingston Gorse, we cover West Kingston (1 mile west), Ferring (1 mile north-east), Angmering-on-Sea (1 mile west), East Preston (1 mile north-west) and Hangleton (1 mile north). Within a short drive, we also cover Worthing (3 miles north-east), Bognor Regis (10 miles west), Chichester (14 miles west), Selsey (15 miles west), Littlehampton (3 miles west) and Shoreham-by-Sea (9 miles east).
Local landmarks in Kingston Gorse
Around Kingston Gorse, our work takes us to homes and buildings near Chatsmore Catholic High School and the streets around them. The nearest railway station is Goring-By-Sea station, about 1.5 miles north-east. A little further out are Zachary Merton Hospital (1.8 miles west) and Rustington Museum (2 miles west). For a walk, there’s Highdown Hill.
Common problems we fix in Kingston Gorse
Harsh cleaners and scrubbing wear grout away. Bleach and acidic limescale removers can attack it over time, until the joints are rough and low.
Any of these means the joints need attention:
- Corners filled with grout instead of silicone
- Shower grout that has worn away
- Cracked or crumbling grout lines
- Discoloured grout on otherwise sound tiles
If you look after a building such as Ferring CofE Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
What to look for in a quote
- Are they insured?
- Whether all the old sealant comes out first
- What preparation is included
- The length of the guarantee
Different surfaces, different methods
Wet rooms
In a wet room, the whole floor gets wet, so good grout is important. We check the tiles first.
Bathroom floors
Cracked floor grout can point to movement underneath. We look for loose tiles first.
How the visit works
We keep the work tidy and contained to the joints we’re treating. Expect the work to take a few hours, or longer for a fully tiled room, and we explain the cure time before we leave. In a small place like Kingston Gorse, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We check the tiles are sound and flag any that are loose or hollow.
- The old grout comes out to a consistent depth, without damaging the tiles.
- We vacuum the joints and clean out the dust.
- We fill the joints with new grout, then clean the tiles.
- We reseal the internal corners and edges with silicone.
How to prepare
- Let us know about stairs, lifts or work at height
- Let us know about parking restrictions
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we will talk you through the work.