West Sussex · England
Regrouting in Elmer
We cover Elmer for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Gaps where the shower grout has gone
- Cracked grout along the bath or tray
- Grout in a colour the owner wants to change
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
Regrouting in Elmer, done properly
Stained, crumbling or cracked grout can make a sound bathroom look tired. Regrouting replaces the grout and keeps the tiles you have, so there’s no stripping out and no new tiles to choose. Typical jobs include old grout in a dated colour and grout washed out of a shower, on bathroom wall tiles, shower walls and kitchen splashbacks.
Even in a smaller place like Elmer, bathrooms and kitchens see heavy daily use. Older or newer, every room gets the same approach: all the old material out, the joint cleaned and dried, then new sealant or grout.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Location
- Elmer (PO22)
- Wider area
- West Sussex
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What else we do in Elmer
Leave it or put it right?
Once grout cracks, water can get behind the tiling. Left alone, that water can loosen tiles or damage the wall, which turns a regrout into a retile. Sorting it early keeps the job simple. In a smaller place like Elmer, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are not sure whether it needs doing, ring 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
Why choose Mr Mastic in Elmer
- 180+ five-star Google reviews
- Anti-fungal silicone where joints get wet
- Tidy, careful work
- Domestic, commercial and hotel work
Take a look at our cost guide or our reviews.
What the job involves on each surface
Shower walls
A shower wall is soaked daily, so its grout takes the most punishment. It usually fails first.
Wet rooms
New grout in a wet room keeps the surface sound. It doesn’t repair failed tanking underneath.
Regrouting around Elmer
Elmer is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
If you let a flat or house near Ford station, stained grout drags a rental down, and regrouting between lets puts that right. Schools such as Bishop Tufnell CofE Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Elmer is about 3 miles east of Bognor Regis, in West Sussex. Homes, rented property, offices and hotels in Elmer is covered for regrouting, old or new, large or small. The work is guaranteed for a year. 371 places in West Sussex are on our list. Portsmouth is on our list too, around 20 miles away.
Jobs for regrouting in PO22 works the same way as everywhere else we cover. That includes homes and businesses on Elmer Road, Ancton Lane and East Avenue and the roads around them. Other places close to Elmer include Middleton-on-Sea (1 mile west), Bilsham (1 mile north), Atherington (1 mile north-east), Flansham (2 miles north-west) and Horsemere Green (2 miles north-east). Further out, we also cover Worthing (9 miles east), Bognor Regis (3 miles west), Chichester (8 miles north-west), Selsey (9 miles south-west), Littlehampton (4 miles east) and Shoreham-by-Sea (15 miles east).
What’s near Elmer
We work in homes and buildings around Felpham Community College and the streets around them. For rail, the closest station is Ford station, roughly 2.9 miles north-east. Other landmarks nearby include Bognor Regis Museum (3.1 miles west) and Bognor Regis War Memorial Hospital (2.9 miles west).
Common questions in Elmer
Can you help a landlord with a rental near Ford station?
Yes. We work for landlords and letting agents as well as homeowners. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Can you do regrouting in Elmer?
Yes, Elmer is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear price.
How long will you be here?
A typical job takes a few hours, or longer for a fully tiled room. We will confirm how long when we quote.
Is the work guaranteed?
Every job comes with our one-year guarantee.
Will there be a smell?
Some sealants have a smell while they cure. Opening a window helps.
Where are you based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
What do you need from me for a quote?
Just the basics: the address or postcode, what’s wrong and any access issues. Then call 0345 464 0079 or send us an email.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
How it works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes anything from a few hours to a full day, depending on the area and we leave things clean and tidy. Parking around Elmer is generally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- First, we check for loose or hollow tiles and point out any we find.
- We rake out the old grout to an even depth, taking care of the tile edges.
- Dust and debris are vacuumed out of every joint.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- The corners and edges get new silicone, because grout there would crack.
Before we arrive
- Mention if the joints have been sealed before
- Mention any parking rules near the property
- Plan for the work area to be out of bounds to pets and children
How to get a quote
We do not publish a price list, because every job is different. Instead, we give you a clear price for your job. To arrange one, call 0345 464 0079 or send us an email.
Read more
Signs you need regrouting in Elmer
A poor original job is a common cause. Grout that was too wet, not packed in or cleaned off too hard can wash out within a few years.
If you can see any of these, it’s time to have the joints looked at:
- Cracked or crumbling grout lines
- Grout in a colour the owner wants to change
- Floor grout that has worn and darkened
- Shower grout that has worn away
Homes close to St Nicholas Church include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
What to look for in a quote
- How the surfaces are prepared before sealing
- How much experience the applicator has
- What the quote includes, VAT included or not
- Whether the sealant suits the joint
What affects the quote in Elmer
We quote each job individually. This is what makes a difference:
- The number and length of the joints
- The product the joint needs
- How easy the joints are to reach
- The number of rooms or windows
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You’ll know the price before we begin.
Helping us quote
To make quoting easier, please include:
- Whether it has been sealed before
- The problem you’ve noticed
- The address or postcode of the job
- A few pictures by email, if you can
For regrouting in Elmer, ring 0345 464 0079 or send us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.