West Sussex · England

Mastic man in PO22

We cover every part of the PO22 postcode district, which takes in Middleton-on-Sea, Elmer and Felpham. Old sealant is always cut out completely, with a one-year guarantee.

Book a mastic man in PO22

How bathroom resealing works in PO22

Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through. Every trace of the old sealant is taken out and replaced with anti-fungal sanitary silicone. We’re often asked to deal with water escaping at the shower enclosure and mouldy sealant that has gone black, across kitchen worktops & upstands, wet rooms and sinks & splashbacks.

Most of a good job is in the preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a morning or an afternoon for most single baths and showers.

  1. We start by protecting the area and stripping out the old bead, including the film left on the tiles.
  2. Next, the joint is cleaned and any mould is treated.
  3. Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
  4. We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
  5. Finally we tidy up and explain the cure time before we leave.

What you’ll pay

The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first.

Why choose Mr Mastic

  • Every job guaranteed for a year
  • Experience in homes, commercial sites and hotels
  • 180+ five-star Google reviews
  • Anti-fungal sanitary silicone in wet areas

Ask for a quote

Every job is quoted individually, so start by telling us what you need. Just call 0345 464 0079 or email us with the details.

Landmarks near Middleton-on-Sea

We work in homes and buildings around Bishop Tufnell CofE Primary School, Felpham Community College and St Nicholas Church. Middleton-on-Sea’s nearest station is Bognor Regis station, about 2.5 miles west. Other landmarks nearby include Bognor Regis Museum (2.7 miles west) and Tote Copse Castle (4.2 miles north-west).

Where we work in PO22

Homes across PO22 range from older properties to new builds, and in places like Bognor Regis, South Bersted and Middleton-on-Sea there’s plenty of rented property too. Sound sealant and clean grout keep water out and rooms looking cared for.

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings. For any job in PO22, joints are cleaned back properly before anything new goes in. In the coastal parts of PO22, the sea-facing side of a building takes the most weather, and that’s where sealant usually gives up first. Good preparation and the right sealant help it cope.

Middleton-on-Sea: For landlords with property near Bognor Regis station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For site and facilities teams at buildings such as Bishop Tufnell CofE Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.

Quotes for bathroom resealing in PO22

The price is agreed before any work begins. It takes into account:

  • The old material and how stubborn it is
  • How easy the joints are to reach
  • Any working-time requirements on site
  • How many rooms, windows or areas are involved

No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we will explain the quote if you ask.

Helping us quote

What to tell us when you ask for a quote:

  • Roughly how big the job is
  • Any previous sealing or DIY work
  • Access, such as stairs, a lift or height
  • What’s wrong with the joints now

We do not publish a price list, because every job is different. Instead, we send you a clear quote for your job. To arrange one, call 0345 464 0079 or send us an email.

What happens if it’s left?

You do not need a new bathroom because the sealant looks bad. Replacing the joint is generally all it takes. If we find a deeper problem, you’ll hear it from us.

Questions to ask before you book

  • Whether all the old sealant comes out first
  • How the colour is chosen
  • What preparation is included
  • How long to leave it before use

Can I do it myself?

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

Keeping the joints in good condition

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Do not let bottles sit on the bead
  • Clean with a mild bathroom cleaner and a soft cloth
  • Open a window or run the fan so the room dries
  • Look for lifting corners and small gaps now and then

Check the sealant now and then. Small splits and lifting ends are easy to catch early, so if something does not look right, just ring 0345 464 0079 or email us.

Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and replacing it when it fails protects the rest of the room.

When something else is needed

Sealant isn’t the answer to every problem, and we’d rather say so up front. It will not solve:

  • Damage behind the tiles that needs a tiler
  • A tray that rocks until it’s re-bedded
  • Water getting in through the grout rather than the sealant

Questions from PO22

What do you put in the joint?

The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.

Do you work in PO22?

We do. Our applicators work in PO22.

Can landlords and businesses book you?

Yes, often. Several properties can go on one quote.

Can you work on commercial sites?

Yes. We’ve worked for hotels, offices and other businesses.

Can I choose the colour of the sealant?

Most people choose white or clear, but other colours can be used to suit tiles and worktops. Let us know your preference when you ask for a quote.

How long does the new silicone need before I use the shower?

After around 24 hours in most cases. We’ll tell you the cure time for the product we used.

What does bathroom resealing cost?

Every job is different, so each one gets its own quote. To get one, call 0345 464 0079 or email us and let us know what needs doing and where.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job