West Sussex · England
Floor Joint Sealing in Elmer
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for Elmer, backed by a 12-month guarantee. Ask us for a quote.
- Floor edges that trap water and grime
- Cracked caulk along skirting in bathrooms and kitchens
- Open joints around bathroom floor edges
How we handle floor joint sealing in Elmer
Tiled floors can crack along the grout when there’s no room for movement. We can turn a line of grout into a movement joint by replacing it with flexible sealant in a matching colour. If you are dealing with failed joint filler in concrete floors and gaps opening between the floor and skirting, we can put it right, on thresholds, skirting boards and wet room & bathroom floors alike.
In and around Elmer, floors range from older timber boards to tiles and newer finishes, each moving in its own way. Skirting and threshold joints need a sealant that suits the floor.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Location
- Elmer (PO22)
- Region
- West Sussex
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
For landlords and businesses
Letting agents often deal with us directly. Tell us the address, the job and how access works.
For anyone letting property in or around Elmer, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
Your questions about floor joint sealing in Elmer
Will you come out to Elmer?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Elmer in your area for floor joint sealing?
Yes, Elmer is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.
Do I need to be at home?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Is caulk good enough for skirting?
Caulk is fine for dry joints that do not move, but it cracks where there’s movement or water. For most floor joints, we use a flexible sealant.
Will the old sealant be removed?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.
Where are you based?
We work from Crawley. We cover Elmer and the rest of West Sussex.
Do you offer different sealant colours?
We help you choose a colour that suits. The product needed can limit the range.
How to look after the new joints
Simple care keeps the joints in good condition. We recommend:
- Sweep along the edges of the floor
- Cone off fresh joints until they’re ready
- Use a well-wrung mop rather than flooding the floor
- Walk round the room once a year and look at the edges
In commercial units, keep pallet trucks and heavy wheels off new joints until they’ve cured. Cone off the area if needed.
Open skirting gaps let in draughts, dust and sometimes insects. Sealing it early keeps the room cleaner and the edges sound.
How it works
On the day, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before any work begins. Most jobs take a morning or an afternoon for most homes. Parking around Elmer is normally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- The room is cleared along the joints so we can reach them.
- Old material is removed from the joint.
- Edges are cleaned and dried.
- A flexible sealant suited to the floor is applied.
- Finally, we check the work and talk you through aftercare.
Before we arrive
- Keep children and pets away from the work area
- Let us know if you’ve seen damp or leaks
- Let us know about parking restrictions
Getting a quote
There’s no standard price list. Instead, we send you a clear quote for your job. To get started, ring 0345 464 0079 or send us an email.
Related advice
Nearby places to Elmer
More services for Elmer
New homes and floors in Elmer
Across West Sussex, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
For landlords with property near Ford station, open skirting and floor joints collect dirt and water, so seal them while the property is empty. If you look after a building such as Bishop Tufnell CofE Primary School, entrance and corridor floor joints take a lot of traffic.
Elmer is about 3 miles east of Bognor Regis, in West Sussex. For floor joint sealing in and around Elmer, please call 0345 464 0079 or email us for a quick quote. We cover West Sussex from our Crawley base, Elmer included. Our West Sussex coverage runs to 371 places, and Elmer is one of them. There’s also a page for Portsmouth, roughly 20 miles from Elmer.
All of PO22 is within our area for floor joint sealing. Streets in the area include Elmer Road, Ancton Lane and East Avenue, all of which we cover. Neighbouring places we cover for floor joint sealing include Middleton-on-Sea (1 mile west), Bilsham (1 mile north), Atherington (1 mile north-east), Flansham (2 miles north-west) and Horsemere Green (2 miles north-east). Larger places within reach include Worthing (9 miles east), Bognor Regis (3 miles west), Chichester (8 miles north-west), Selsey (9 miles south-west), Littlehampton (4 miles east) and Shoreham-by-Sea (15 miles east).
Around Elmer
We work in homes and buildings around Felpham Community College and the streets around them. Elmer’s nearest station is Ford station, about 2.9 miles north-east of the centre. Nearby you will also find Bognor Regis Museum (3.1 miles west) and Bognor Regis War Memorial Hospital (2.9 miles west).
When to call us in Elmer
A new floor or screed shrinks and settles as it dries. Gaps at the edges appear in the first year or so.
Common reasons people contact us are:
- Tiled floors with no room to move
- Failed seals where bathroom floors meet baths and panels
- Worn sealant at door thresholds
- Grout used at the floor edge instead of sealant
Community buildings like St Nicholas Church are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear.
Questions to ask before booking
- Are they insured?
- Whether the sealant suits the joint
- Is the old sealant removed completely?
- Who does the work, and how experienced they are
What happens if it’s left?
Open joints along wet floors let water into the subfloor and behind skirting. Sealing them now keeps the problem at the surface. In a smaller place like Elmer, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why choose Mr Mastic in Elmer
- 4.9 on Google from 180+ five-star reviews
- Full insurance on every job
- Homes, businesses and hotels
- More than 20 years in sealant work
Take a look at what affects the cost and customer reviews.
What affects the quote in Elmer
Your quote is based on your job. We take into account:
- Any mould that needs treating
- The product the joint needs
- The amount of work
- How many areas need sealing
Combining jobs into one visit normally makes better use of the time than several visits. We will give you a clear price for the lot.
What to tell us for a quote
Photos help, but a description is a good start. Try to tell us:
- A few photos by email, if you can
- The type of property
- What’s wrong with the joints now
- If someone has resealed it before
To get a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. You’ll have a clear quote before work begins.
What sealant work can’t fix
In fairness, there are a few things sealant won’t fix:
- Cracked or broken concrete slabs
- Leaks from a failed tanking system
- Loose, hollow or cracked tiles, which need a tiler
Not sure which it is? You can call 0345 464 0079 or send us an email and we will tell you honestly before booking.
Joints and surfaces we work on
- Skirting boards
- Tiled floors
- Thresholds
- Concrete floor joints
- Wet room & bathroom floors
- Commercial floors