West Sussex · England
Bilsham Regrouting
Specialist regrouting for Bilsham: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Shower grout that has worn away
- Old grout in a dated colour
- Cracked grout along the bath or tray
The process
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes anything from a few hours to a full day, depending on the area, depending on the amount of work. Somewhere as small as Bilsham, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We check the tiles are sound and flag any that are loose or hollow.
- Old grout is raked out to a consistent depth without chipping the tiles.
- The joints are vacuumed and cleaned.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- We reseal the internal corners and edges with silicone.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Tell us about any previous sealing or DIY attempts
- Move anything stored near the joints
How to get a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved.
Related advice
About our regrouting in Bilsham
We regroute showers, bathroom walls and floors, splashbacks and wet rooms. It can be a full room, or just the area that has failed. Either way, tiled areas in Bilsham are handled the same careful way. We are often asked to deal with discoloured grout on otherwise sound tiles and grout that stays dark however much it’s cleaned, across bathroom wall tiles, shower walls and bathroom floors.
Homes around Bilsham are mostly houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
Every job comes with a one-year guarantee.
- Where
- Bilsham (BN18)
- Wider area
- West Sussex
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Places near Bilsham
More services for Bilsham
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
What happens if it’s left?
With regrouting, your tiles stay where they are. Retiling is a much bigger job: stripping, making good, new tiles and new grout, and often a few days without a shower. When the tiles are fine, it’s the sensible first step. Around Bilsham, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or drop us an email and we will talk you through it.
Why book with us
- Over 20 years’ experience
- Neat joints and a tidy finish
- Sanitary silicone with an anti-fungal additive in wet areas
- Quality sealants from Arbo and Everbuild
See what affects the cost and customer reviews.
Do you need regrouting in Bilsham?
Grout is porous, so it soaks up water, soap and dirt. Given time, it discolours and begins to break down and showers that get daily use suffer most.
Any of these means the joints need attention:
- Grout stained black or orange that will not clean
- Gaps where the shower grout has gone
- Kitchen splashback grout stained by grease
- A grout colour that no longer suits the room
Schools such as Yapton CE Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Questions to ask before you book
- How long the guarantee is
- What the cure time is
- Is VAT in the price?
- Are they insured?
What affects the cost of regrouting
Some jobs are bigger than they look, and some smaller. The main factors:
- When we can work, for business premises
- The size of the job
- Whether there’s mould to deal with
- Whether old sealant or filler has to be cut out
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before any work starts.
Asking for a quote
When you call or email, these details help:
- A few pictures by email, if you can
- Whether it has been sealed before
- If it’s domestic, commercial or a hotel
- What’s wrong with the joints now
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. Whenever you are ready, call 0345 464 0079 or email us.
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we are fully insured for the work.
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can go on one quote.
Surface by surface
Bathroom wall tiles
Tiles away from the shower stay drier but still stain and crack. New grout freshens them up.
Wet rooms
Wet rooms have water across the floor, so sound grout really matters. We check for loose tiles before starting.
Bathrooms and kitchens in Bilsham
Bilsham is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Barnham station, clean grout and fresh sealant between tenancies make a bathroom look cared for again. In the older streets around Bilsham Chapel, older homes can move a little, which is hard on rigid grout and tired sealant.
Bilsham is about 3 miles north-east of Bognor Regis, in West Sussex. Every kind of property in Bilsham is covered for regrouting, old or new, large or small. The work is guaranteed for a year. 371 places in West Sussex are on our list, from the larger towns to small villages. For nearby work, see our Portsmouth page (20 miles or so).
Postcode districts we cover here for regrouting: BN18. Neighbouring places we cover for regrouting include Yapton (1 mile north), Flansham (1 mile west), Barnham (2 miles north-west), West Barnham (2 miles north-west) and Lidsey (2 miles west). Larger places within reach include Worthing (10 miles east), Bognor Regis (3 miles south-west), Chichester (7 miles west), Selsey (9 miles south-west), Littlehampton (4 miles east) and Shoreham-by-Sea (15 miles east).
Local landmarks in Bilsham
Locally, jobs take us to homes and businesses close to Felpham Community College. Bilsham’s nearest station is Barnham station, about 1.8 miles north-west of the centre. A little further out are Bognor Regis Museum (3.3 miles south-west) and Bognor Regis War Memorial Hospital (2.8 miles south-west). Green spaces nearby include WWT Arundel.
Common questions in Bilsham
Can you do regrouting in Bilsham?
Yes. We work across London and the South East, and Bilsham is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job.
Will you come out to Bilsham?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you seal over the old sealant?
No, it won’t last. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us, and we’re fully insured.
Where are you based?
We’re based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Do you grout the corners?
Internal corners and edges are sealed with flexible silicone. Grout in those joints cracks as the building moves.
How soon can the shower be used after regrouting?
We give you a time before we leave. It depends on the grout and the sealant used so please stick to it.