Greater London · England

Regrouting in Brockley Hill

Our applicators work in Brockley Hill on raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.

  • Kitchen splashback grout stained by grease
  • A grout colour that no longer suits the room
  • Cracked grout along the bath or tray

Regrouting in Brockley Hill

Regrouting in Brockley Hill

Regrouting is normally paired with resealing. Grout is for the joints between tiles, but corners and edges move, so they’re sealed with silicone rather than grout. Doing both at once leaves the whole area sound. We work on wet rooms, shower walls and bathroom wall tiles, and people most often call us about splashback grout that has darkened and grout that stays dark however much it’s cleaned.

Hard London water leaves limescale on sealant, grout and taps alike. In Brockley Hill, regrouting is as much about a room looking cared for as about keeping water out.

Big or small, it’s backed by our 12-month guarantee in Brockley Hill and across Greater London.

Mr Mastic applicator smiling as he applies silicone to the corner of a bath
Where
Brockley Hill (HA7, HA8, WD6)
Region
Greater London
Guarantee
A year, on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026

Why deal with it now?

Bleach can lighten stained grout for a while, but mould that has got into grout normally comes back. New grout, with silicone in the corners, deals with the cause. Damp from a failed joint spreads quietly in older London brickwork and timber, and once it shows in Brockley Hill, the repair is bigger than a sealant job.

What it costs depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before we start, so you know where you stand.

Why Brockley Hill customers choose us

  • Anti-fungal sanitary silicone in wet areas
  • Every job guaranteed for a year
  • Any old sealant cut out fully, not covered over
  • 20+ years of sealant experience

Take a look at how sealant jobs are priced and our reviews.

Should I try it myself first?

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

How to look after the new joints

How long the joints last depends on use and care. Here’s what we suggest:

  • Use gentle cleaners on grout
  • Wipe or squeegee the shower walls
  • Run the extractor fan during and after a shower
  • Do not ignore a tile that feels loose

Check the corner silicone now and then. It’s the part that moves, so the sealant there will need renewing in time, long before the grout does.

Grout that stays dark after cleaning is starting to fail. Regrouting at this stage is straightforward, before the joints open up.

What happens on the day

You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes anything from a few hours to a full day, depending on the area in most cases. Many London jobs are in flats, so we come ready for stairs, narrow hallways and shared entrances. Mention any building rules, key holders or managing agents when you book.

  1. We agree the area to be regrouted and point out any loose tiles.
  2. We remove the old grout carefully.
  3. The joints are cleaned out and vacuumed.
  4. We grout the joints and wipe the tiles clean.
  5. Internal corners and edges are resealed.

Before we arrive

  • Clear items away from the joints we’re working on
  • Mention any sign-in or site rules at work premises
  • Mention any parking rules near the property

Get a quote

Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved and give you a clear quote.

Get a quick quote

Related advice

Surface by surface

Bathroom floors

Floor grout takes foot traffic as well as water. It wears and darkens over time.

Wet rooms

In a wet room, the whole floor gets wet, so sound grout really matters. We check the tiles first.

What we’re called out for in Brockley Hill

Movement behind the tiles cracks grout. That can be a loose tile, a flexing floor or a stud wall, so we check the tiles before work begins.

People usually contact us when they notice one of these:

  • Shower grout that has worn away
  • Grout in corners that has cracked
  • Splashback grout that has darkened
  • Floor grout that has worn and darkened

Brockley Hill is in London, so parking needs planning: let us know about parking bays, permits or a driveway.

Before you book anyone

  • How the surfaces are prepared before sealing
  • What product goes in the joint
  • What the cure time is
  • Are they insured?

Choosing a sealant specialist

Regrouting in Brockley Hill: local notes

London has hard water, so limescale builds up on sealant, grout and fittings. In a London flat, water from a failed bath or shower seal can reach the neighbours below, so tired sealant is best dealt with early.

For an older house near a landmark such as St Peter, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Letting a property close to Elstree & Borehamwood station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again.

Brockley Hill is about 1 mile north of Stanmore, in Greater London. Anywhere in HA7, we cover regrouting for homes and businesses. 764 places in Greater London are on our list, from the larger towns to small villages. You can also see our page for London, roughly 13 miles from Brockley Hill.

Postcode districts we cover here for regrouting: HA7, HA8 and WD6. If you need regrouting at a property on Wood Lane, Brockley Avenue and Pipers Green Lane or a nearby road, our applicators can take on the job. We also cover the places around Brockley Hill: Stanmore (1 mile south), Bushey Heath (2 miles west), Belmont (2 miles south-west), Harrow Weald (2 miles south-west) and Bushey (3 miles north-west). Larger places within reach include London (13 miles south-east), City of Westminster (10 miles south-east), Marylebone (10 miles south-east), Kensington (10 miles south-east), St Pancras (11 miles south-east) and Shoreditch (12 miles south-east).

Near you in Brockley Hill

We work in homes and buildings around Abercorn Arms Public House, Aylward Primary School and Edgwarebury Park, among other places. The closest station to Brockley Hill is Elstree & Borehamwood station, about 1.8 miles north-east of the centre. Nearby you’ll also find Royal National Orthopaedic Hospital (less than half a mile north-west) and Hilfield Castle (2.2 miles north-west). Not far away are Darland's Lake and Edgware Way Grassland.

Map of Brockley Hill © OpenStreetMap contributors

Honest limits

It helps to know what we cannot do:

  • Leaks from pipes, valves or wastes (a plumber’s job)
  • Tiles that are chipped or split
  • Waterproofing that has failed below the tiling

If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before you book.

Surfaces we seal

  • Kitchen splashbacks
  • Wet rooms
  • Shower walls
  • Bathroom floors
  • Tiled floors
  • Bathroom wall tiles

FAQs for Brockley Hill

Is parking a problem for a job in Brockley Hill?

It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. That way the visit can be planned around it.

Can you help a landlord with a rental near Elstree & Borehamwood station?

Yes, rental work is part of what we do. You can phone 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before work begins.

Do you remove the old sealant?

Yes. All of the old material is cut out and the joint cleaned.

Do you regrout part of a bathroom, like the shower?

Yes. We’ll check the other tiled areas as well and tell you if anything else needs attention.

Should I try DIY first?

You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.

What do you put in the joint?

Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.

What information do you need?

Just the basics: the address or postcode, what’s wrong and any access issues. After that, simply call 0345 464 0079 or drop us an email.

Is there any odour?

Possibly a little. Any smell clears as the sealant cures.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job