Greater London · England
Mastic man in WC2H
Our applicators cover all of the WC2H postcode district, including Clare Market, Aldwych and Adelphi. Every joint is properly prepared, with a one-year guarantee.
Towns and villages in WC2H
Sealant work we offer in WC2H
- Remedial sealant & repairs
- Glazing & conservatory sealant
- Window & door mastic
- Fire-rated sealant
- Bathroom & kitchen resealing
- Floor & skirting joints
- Commercial & hotel sealant
- External & façade joints
- Sand mastic for sash & case windows
- Regrouting
- New-build mastic & snagging
- Gutter, fascia & soffit sealing
- All services
Tell us what needs doing and your postcode for a quick quote: phone 0345 464 0079 or send us an email.
Districts next door
Elsewhere in Greater London
Every town in Greater London
Areas we cover
Bathroom resealing in WC2H: how it works
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a neat new joint puts that right in a short visit. Just as important, it closes the gaps water would otherwise get through. We work on basins & vanity units, wet rooms and sinks & splashbacks, and common reasons people get in touch are shrunken sealant along the back of a worktop and damp behind the bath or under the tray.
Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. In total, it usually takes half a day or less for one room, longer when the kitchen is included.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- We let it dry fully and fill the bath with water before sealing.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- Finally we tidy up and explain the cure time before we leave.
Pricing in WC2H
What it costs depends on the amount of work, how much old material has to come out and how easy the joints are to reach. We give a clear quote before we start.
Why clients in WC2H choose us
- Anti-fungal silicone where joints get wet
- Tidy, careful work
- Full insurance on every job
- Every job guaranteed for a year
Ask for a quote
Need a quote? Please phone 0345 464 0079 or send us an email with a few details. We will explain what we’d do and send you a clear quote before work begins.
What’s near Clare Market
In Clare Market, that means homes and buildings near Enon Chapel, St Clement Danes CofE Primary School and Ye Old White Horse pub, among other places. Also close by are Mercers' School (within half a mile north-east), London Nautical School (0.7 miles south-east), LSE Shaw Library (under half a mile south) and Lincoln's Inn Fields (under half a mile north). Clare Market’s nearest station is London Charing Cross station, roughly 0.6 miles south-west. Nearby you will also find St Philip's Hospital (within half a mile north-west) and Montfichet's Tower (0.7 miles east). Not far away are Ludgate Hill and St. James's Park Lake.
Bathroom resealing across WC2H: local notes
From Aldwych, Adelphi and Temple to its smaller places, homes across WC2H have bathrooms and kitchens of every age. Sealant and grout wear out in all of them, whether it’s a family bathroom, a rented flat or a hotel en suite.
The South East is one of the drier parts of the UK, but outdoor sealant still needs a dry day and clean surfaces, so outside work in WC2H is planned around the forecast.
Clare Market: If you let a flat or house near London Charing Cross station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. Managing a site like St Clement Danes CofE Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Looking after it afterwards
After the cure time, these simple habits help:
- Wait for the cure time we give you
- Avoid abrasive pads on the sealant
- Dry the bead with a towel now and then
- Use gentle cleaners on the silicone
Clean the silicone with care: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning generally won’t remove it. Replacing the sealant early keeps the job small.
Should I try it myself first?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
When it isn’t the sealant
Before you book, it’s worth knowing the limits:
- Water getting in through the grout rather than the sealant
- A cracked shower tray or bath (that needs repair or replacement)
- Loose or hollow tiles, or failed tanking behind them
Why deal with it now?
A quick bead over the top of the old one might look better for a while, but it won’t bond. Water creeps under it and mould follows, and the next reseal means two layers to cut out.
Questions to ask before you book
- Who turns up on the day
- How hidden problems are handled
- The length of the guarantee
- Whether all the old sealant comes out first
What affects the cost of bathroom resealing
The quote reflects the job in front of us. We take into account:
- The type of sealant required
- The amount of work
- Whether the work is at height
- Whether old sealant or filler has to be cut out
Combining jobs into one visit normally makes better use of the time than several visits. You’ll get one clear quote for the whole job.
Helping us quote
When you call or email, it’s useful to know:
- Where the job is, and your postcode
- Pictures of the joints, sent by email
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll take it from there.
Questions from WC2H
Do you work for letting agents?
Yes, we do. We work in homes, commercial premises and hotels.
Can I add another job to the visit?
Yes. Several rooms, windows or areas can go on one quote.
How long does it take to reseal a bath or shower?
Allow a morning or an afternoon for most single baths and showers. We will confirm how long your job needs when we quote.
How long before the new sealant can get wet?
Around 24 hours is typical, and we confirm the time for the product used. Using it sooner can damage the bead.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Can tenants book the work?
Yes. Check with your landlord; we can send the quote to them too.
