Surrey · England
Mastic man in TW19
Our applicators cover all of the TW19 postcode district, which takes in Stanwell, Wraysbury and West Bedfont. Old sealant is always cut out completely, with a one-year guarantee.
Towns and villages in TW19
- Stanwell
- Wraysbury
- West Bedfont
- Stanwell Moor
- Hythe End
- Sunnymeads
- Staines-upon-Thames
- Ashford
- Egham Hythe
- Horton
Our services across TW19
- Floor & skirting joints
- Window & door mastic
- New-build mastic & snagging
- Bathroom & kitchen resealing
- Fire-rated sealant
- Regrouting
- Gutter, fascia & soffit sealing
- Remedial sealant & repairs
- Commercial & hotel sealant
- External & façade joints
- Sand mastic for sash & case windows
- Glazing & conservatory sealant
- All services
Tell us what needs doing and your postcode for a quick quote: call 0345 464 0079 or email us.
Bathroom resealing in TW19: how it works
Homes in TW19 have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. We work on kitchen worktops & upstands, basins & vanity units and baths, and people most often call us about a bead that has pulled away from the tiles and mouldy sealant that has gone black.
Good joint work is mostly preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes two to three hours for a typical bath, depending on how much old sealant there is.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
What affects the price in TW19
Combining jobs into one visit is normally more efficient than separate visits. You will get one clear quote for the whole job.
What you get with us
- Sealant colour chosen to suit
- More than 20 years in sealant work
- Colour agreed with you before work begins
- We leave the area clean and tidy
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that is easy.
Local landmarks in Stanwell
In Stanwell, that means homes and buildings near The Swan Public House, Thomas Knyvett College and Spelthorne College and the streets around them. Also close by are Church of St Mary (within half a mile north-west) and Stanwell Fields CofE Primary School (within half a mile north-east). The nearest railway station is Ashford Surrey station, roughly 1.2 miles south of the centre. Well-known places in the area include Ashford Hospital (0.9 miles south) and Spelthorne Museum (2.1 miles south-west). For a walk, there’s Staines Reservoirs and St Ann's Hill.
Where we work in TW19
TW19 has homes of every age, old and new, with plenty of rented property in places like Staines-upon-Thames, Ashford and Stanwell. Sound sealant and clean grout keep water out and rooms looking cared for.
Hard water across most of the South East leaves limescale on sealant, grout and fittings. Whatever the job in TW19, surfaces are cleaned back properly before new sealant goes in.
Stanwell: If you let a flat or house near Ashford Surrey station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For site and facilities teams at buildings such as Stanwell Fields CofE Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
When something else is needed
New sealant cannot fix everything, and we will tell you before any work starts. Sealant will not put right:
- Water getting in through the grout rather than the sealant
- A tray or bath that’s cracked through
- Tiles that have come away from the wall
How to look after the new joints
After the cure time, these simple habits help:
- Keep bottles off the sealant line
- Squeegee the walls and tray after use
- Use gentle cleaners on the silicone
- Wait for the cure time we give you
Don’t stand bottles along the bead, as they hold water against it. A quick squeegee after showering keeps water from sitting on the joint.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. Any of these means the joint needs attention.
Landlords, agents and businesses in TW19
We work for landlords and agents as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will give you a quote.
Signs you need bathroom resealing
Plenty of failed sealant has been laid over the top of older sealant. New silicone will not bond to old silicone, so it peels, leaks and hides mould behind it.
Keep an eye out for any of the following:
- Lumpy, uneven sealant from a DIY attempt
- Damp behind the bath or under the tray
- Failed sealant on the screen profile
- Mouldy sealant that has gone black
What affects the cost of bathroom resealing
Jobs vary more than people expect. What affects the quote:
- How easy the joints are to reach
- The old material and how stubborn it is
- The product the joint needs
- Any working-time requirements on site
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we will go through it with you.
Helping us quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Whether it’s a home or a business
- Where the property is
- If someone has resealed it before
- How we’d reach the joints
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, call 0345 464 0079 or send us an email.
Questions from TW19
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access.
Is there any odour?
Sometimes, a little. It fades as the sealant cures, and ventilation helps.
What colours of sealant can you use?
White and clear are the most common choices, but other colours can be used to suit tiles and worktops. Let us know your preference when you ask for a quote.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and we’ll quote it together.
Are you insured?
Yes. We’re fully insured.