Greater London · England
Mastic man in TW14
Mastic and sealant work for homes and businesses across TW14, covering Feltham, Bedfont and Hatton. Clear quotes before we start and a one-year guarantee.
Where we work in TW14
Sealant work we offer in TW14
- Regrouting
- Bathroom & kitchen resealing
- Commercial & hotel sealant
- Gutter, fascia & soffit sealing
- Floor & skirting joints
- Glazing & conservatory sealant
- Window & door mastic
- External & façade joints
- Fire-rated sealant
- Sand mastic for sash & case windows
- Remedial sealant & repairs
- New-build mastic & snagging
- See all services
Tell us what needs doing and your postcode and we’ll give you a clear price: call 0345 464 0079 or email us.
Districts next door
Elsewhere in Greater London
All places in Greater London
Areas we cover
Bathroom resealing in TW14: how it works
Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. We work on basins & vanity units, kitchen worktops & upstands and sinks & splashbacks, and common reasons people get in touch are damp behind the bath or under the tray and shrunken sealant along the back of a worktop.
When we arrive, we start by going over the job with you. Surfaces next to the work are protected before any work begins. Most jobs take two to three hours for a typical bath, depending on how much old sealant there is.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
What you’ll pay
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
What you get with us
- White, clear, grey or another colour, product permitting
- We agree the colour with you first
- Full insurance on every job
- Quality sealants from Arbo and Everbuild
Ask for a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. When it suits you, call 0345 464 0079 or send us an email.
Local landmarks in Feltham
We work in homes and buildings around Moon On The Square pub, Christ Church and Rivers Academy West London. You will also find St Lawrence Catholic Primary School (within half a mile south-east) and Hounslow Heath (1.2 miles north-east). Feltham has its own railway station: Feltham station. Other landmarks nearby include Hounslow Hospital (2.3 miles north-east) and Kempton Steam Museum (1.6 miles south). The countryside around Feltham includes Richmond Hill and Pevensey Road Nature Reserve.
Where we work in TW14
Our bathroom resealing work across TW14 covers homes, rentals and businesses, in Feltham, Bedfont and Hatton and well beyond. The method is the same everywhere: old material cut out, joints cleaned and dried, and a fresh finish laid.
From Victorian terraces to post-war new towns and modern estates, homes across the South East and London cover every era. Each needs the right sealant for its age and materials.
Feltham: If you live in an older home near Christ Church, older homes can move a little, which is hard on rigid grout and tired sealant. Feltham is in London, so parking needs planning: let us know about parking bays, permits or a driveway.
Leave it or put it right?
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Skip those steps and even the best silicone fails early.
Questions to ask before you book
- Which colour the sealant will be
- Which sealant they’ll use, and why
- How the joint is cleaned and prepared
- What happens if the job turns out different
Signs you need bathroom resealing
Plenty of failed sealant has been laid over the top of older sealant. Fresh silicone cannot grip the old bead underneath, so it lifts, lets water in and traps mould underneath.
It’s worth asking for a quote if you see:
- Damp behind the bath or under the tray
- Sealant that has split, shrunk or peeled away
- Water getting behind the kitchen upstand
- Failed sealant on the screen profile
When something else is needed
It helps to know what we cannot do too:
- A leaking waste, trap or valve
- A cracked shower tray or bath (that needs repair or replacement)
- Loose or hollow tiles, or failed tanking behind them
Looking after it afterwards
After the cure time, these simple habits help:
- Check the joints every few months for splits or lifting
- Run the extractor fan during and after every shower
- Avoid abrasive pads on the sealant
- Dry worktop joints after washing up
Keep water off the new bead until it has cured, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Your questions about bathroom resealing in TW14
How long does a bath or shower reseal take?
A single bath or shower takes about a couple of hours, including cutting out the old sealant. A full bathroom and kitchen can take most of a day.
Do I need to be at home?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Can mouldy silicone be sorted out?
Yes. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
Can I add another job to the visit?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Do you remove the old sealant?
Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
Do you work in TW14?
Yes. We cover TW14 and the rest of Greater London. To book, call 0345 464 0079 or send us an email.