Greater London · England
Mastic man in IG4
Based in IG4? Our applicators cover Redbridge and every street in between, inside and out.
Where we work in IG4
Services in IG4
- Remedial sealant & repairs
- External & façade joints
- Commercial & hotel sealant
- Fire-rated sealant
- New-build mastic & snagging
- Glazing & conservatory sealant
- Gutter, fascia & soffit sealing
- Floor & skirting joints
- Regrouting
- Bathroom & kitchen resealing
- Window & door mastic
- Sand mastic for sash & case windows
- All services
Tell us what needs doing and your postcode for a quick quote: ring 0345 464 0079 or drop us an email.
Nearby postcode districts
More in Greater London
Towns and villages in Greater London
Every area we cover
Bathroom resealing in IG4: how it works
A reseal only lasts if the joint is properly prepared. The old sealant is removed to the last smear, after which the joint is degreased and any mould treated. New silicone goes on only when the joint is fully dry. We are often asked to deal with a bead that has pulled away from the tiles and gaps where the bath or tray has moved, on basins & vanity units, sinks & splashbacks and wet rooms.
We work through the job in order: protect, prepare, seal, tidy. Typically it takes two to three hours for a typical bath, depending on how much old sealant there is and we leave things clean and tidy.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- The joint is left to dry, and baths are filled with water first.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- Finally we tidy up and explain the cure time before we leave.
How we quote
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Why clients in IG4 choose us
- Old sealant always removed completely
- Neat joints and a tidy finish
- A 12-month guarantee on all work
- Anti-fungal silicone where joints get wet
How to get a quote
Every job is quoted individually. Simply ring 0345 464 0079 or send us an email and describe the job and send pictures if you have them.
Local landmarks in Redbridge
We work in homes and buildings around Church of St Andrew, Redbridge Primary School and Valentines High School and the streets around them. The nearest railway station is Ilford station, roughly 1.4 miles south-east. Nearby you will also find Wanstead Hospital (1.2 miles north-west) and Redbridge Museum (1.6 miles south-east). Not far away are Pole Hill and Hollow Pond.
Bathrooms and kitchens across IG4
In IG4, bathroom resealing takes in flats, houses, rentals and businesses, in Redbridge and well beyond. Wherever the job is, all the old material comes out before anything new goes in.
From Victorian terraces to post-war new towns and modern estates, homes across the South East and London cover every era. The right sealant depends on the age and materials of the building.
Redbridge: As a London address, Redbridge can be tricky for parking: let us know about parking bays, permits or a driveway. If you look after a building such as Redbridge Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Why deal with it now?
Bleach and mould sprays may lighten black marks for a while, but mould that has grown into the sealant tends to return. The lasting answer is to remove the bead and start again.
Questions to ask before booking
- Which colour the sealant will be
- What the quote includes, VAT included or not
- What insurance they hold
- The length of the guarantee
Common problems we fix in IG4
Not every tube in the shop is meant for a shower. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.
The problems people usually mention when they call include:
- New sealant laid over old sealant that is now lifting
- Lumpy, uneven sealant from a DIY attempt
- Leaking joints on a shower screen
- Leaks into the floor or ceiling below
Aftercare tips
So the new joints stay in good condition:
- Move toiletries away from the joint
- Avoid abrasive pads on the sealant
- Check the joints every few months for splits or lifting
- Squeegee the walls and tray after use
Treat the new bead gently when you clean: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
There’s no need to wait for a full refurbishment. Sealant is a maintenance item, like the paint on a window frame, and renewing it as soon as it fails protects everything around it.
Landlords, agents and businesses in IG4
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
IG4 questions
Can you get rid of the black mould in my sealant?
Yes, we can. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
Is it messy?
We keep the work tidy. We protect what’s around the joints, and we clear up when we are done.
Will there be a smell?
That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.
What does bathroom resealing cost?
Size, access and the old material all affect the cost. Call for a quick quote.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint.
What do you put in the joint?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
Can you work on commercial sites?
Yes, regularly. We can plan bigger jobs in stages.