Orkney Islands · Scotland
New Build Mastic in Rackwick
We cover Rackwick for plot mastic for developers and snagging failed sealant in new homes. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Worktop and upstand sealant coming away
- Cracks appearing as a new home settles
- Shower seals failing in the first year or two
Your questions about new build mastic in Rackwick
Do you cover Rackwick for new build mastic?
Yes, Rackwick is within the area we cover. Our work covers the whole of Scotland. You can send an email to info@mrmastic.co.uk and tell us what needs doing.
Is new build mastic in Rackwick guaranteed?
All our work, in Rackwick and everywhere else, comes with a 12-month guarantee. We’re also fully insured and ARBOMaster approved.
Is there any odour?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Where is Mr Mastic based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Will it make a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
When is the best time to reseal in a new build?
Any seal that’s leaking should be redone straight away. Cosmetic gaps can wait until the first year or two of movement has passed.
How long will you be here?
Most jobs take anything from a few hours to several days, depending on the number of plots. We’ll confirm how long when we quote.
Do you work for letting agents?
Yes, often. We can quote for several properties at once, and between tenancies is a good time for the work.
How we handle new build mastic in Rackwick
We carry out plot mastic and second-fix sealing for builders, and snagging reseals for new-home owners. In both, preparation makes the difference. We’re often asked to deal with leaking shower tray seals in a new home and frame joints opening as the plaster dries, across skirting & floors, bathrooms & en suites and kitchens.
For a place like Rackwick, the journey and access are planned in advance. Inside work goes ahead in any weather; outside mastic needs a dry day.
All our work comes with our 12-month guarantee.
- Where
- Rackwick (KW17)
- Region
- Orkney Islands
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
New build mastic in Rackwick: local notes
Rackwick is within about 1 mile of the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so it’s worth checking at snagging. Island jobs need planning around ferries and the weather, so give us as much notice as you can.
For jobs in and around Rackwick, choosing the right material for each joint is as important as a tidy finish. Around Rackwick, as everywhere, new build mastic is only as good as the preparation behind it.
Rackwick is about 24 miles north of Kirkwall, in the Orkney Islands. Our applicators cover new build mastic for homes and businesses in Rackwick and the surrounding area, as part of our work across the Orkney Islands. Our area takes in 51 places across the Orkney Islands.
Here we cover the KW17 postcode area for new build mastic. Neighbouring places we cover for new build mastic include Pierowall (1 mile south), Brinian (14 miles south), Broughtown (14 miles east), Evie (16 miles south) and Lady (16 miles east). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Around Rackwick
Other landmarks nearby include Noltland Castle (1.3 miles south-west). The countryside around Rackwick includes Couters Hill and North Hill RSPB reserve.
What affects the quote in Rackwick
For a quick quote, just ask. The main things that affect it are:
- How many areas need sealing
- Whether old sealant or filler has to be cut out
- Any mould that needs treating
- Whether the work is at height
What you pay reflects the work, not a rough estimate. That is why we ask about the job first and give you a clear quote before any work starts.
Asking for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Where the property is
- The type of property
- The problem you’ve noticed
- Roughly how big the job is
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work.
How it works
At the end, we look at the finished work together. The visit itself normally takes a few hours for most snagging lists, longer for a run of plots, depending on how much there is to do. Outdoor work around Rackwick depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- Each joint is checked for movement before we start.
- We remove the failed sealant and clean the joints.
- Joints are dried and primed where the product calls for it.
- New sealant goes in, with baths filled first so they’re at their heaviest.
- We check every joint and leave you with the cure times.
Preparing for the visit
- Tell us if parking is tricky
- Let us know about earlier repairs to the joints
- Mention any leaks or damp you’ve noticed
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, email us at info@mrmastic.co.uk.
Advice
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Keep pictures and emails about snagging items
- Use the extractor fan every time you shower
- Resist patching a failed seal with a tube from the DIY shop
- Wait for the cure time before using a resealed shower
Do not stand on the bath edge or the lip of the tray while the sealant cures. Report any movement in a bath or tray.
If a shower tray or bath seal splits in the first year, look for movement. Getting it resealed properly, and any movement checked, stops it recurring.
What sealant work can’t fix
Sealant is not the answer to every problem, and we’ll tell you before we start. Sealant will not put right:
- Baths and trays that move too much for sealant to cope with
- Plumbing faults behind the sealant
- Cracking that points to a structural problem
If you’re not sure, just send an email to info@mrmastic.co.uk and we’ll give you a straight answer.
Joints and surfaces we work on
- Windows & doors
- Show homes
- Bathrooms & en suites
- Skirting & floors
- Kitchens
- Plot handovers
Towns and villages near Rackwick
Other services in Rackwick
Leave it or put it right?
A quick bead over the top of the old sealant can look fine at first, but it won’t bond to the old layer. Taking it all out and starting again is the only way to get a lasting seal. Around Rackwick, water from a failed joint in an older stone home can soak into timber and plaster.
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before any work starts, so you know where you stand.
Why book with us
- ARBOMaster approved applicator
- Colour agreed with you before any work starts
- Experience in homes, commercial sites and hotels
- Every job guaranteed for a year
Read our cost guide and our reviews.
Different surfaces, different methods
Kitchens
Sink joints are wet all the time. We use a sealant suited to kitchens suited to the job.
Windows and doors
A draught at a new window can be a missed or failed joint. We look at the joints and reseal where needed.