Shetland Islands · Scotland
Gutter, fascia & soffit sealing in Vidlin, Shetland Islands
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for homes and businesses in Vidlin and across the Shetland Islands. Fully insured, ARBOMaster approved and guaranteed for a year.
- Fascia boards with gaps between them
- Cracked sealant along roofline trims
- Failed sealant on a garage door frame
How we handle gutter sealing in Vidlin
Our work covers gutter joints and end caps as well as fascias and soffits, along with roofline trims and garage door frames. It’s all about the joints rather than new guttering. If you’re dealing with end caps that drip every time it rains and garage door frames letting rain in, we can put it right, on gutter end caps, uPVC fascias and roofline trims alike.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Outside joints on exposed walls work hard, so they need a sealant that moves with the building.
All of our work is guaranteed for twelve months, in Vidlin and everywhere else we cover.
- Where
- Vidlin (ZE2)
- Region
- Shetland Islands
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What we’re called out for in Vidlin
Leaves and moss hold water in the gutter. Standing water finds the weakest joint and leaks out.
It’s worth asking for a quote if you see:
- Dripping gutter ends
- Old sealant on roofline trims that has split
- Damp patches inside below a leaking gutter
- Quick sealant fixes on gutters that didn’t last
For jobs in and around Vidlin, choosing the right material for each joint is as important as a tidy finish.
What your quote should include
- How much experience the applicator has
- Is the old sealant removed completely?
- What insurance they hold
- Which sealant they’ll use, and why
What the job involves on each surface
Roofline trims
Trim joints are cut out and resealed suited to the material.
Soffit joints
Gaps at soffit joints can let in draughts and insects. We close them with a suitable sealant.
Also in Vidlin
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. Our tips:
- Keep an eye out for wet patches below a joint
- Keep the gutters clear of debris
- Get a dropping gutter looked at quickly
- Watch for drips in a downpour
While checking gutters, glance at the fascia joints too. A small split is quicker to put right.
Early sealing limits how much water hits the wall. If we find a bigger problem, we’ll tell you.
What affects the quote in Vidlin
We do not publish a price list, because no two jobs are the same. The quote depends on:
- The number and length of the joints
- When we can work, for business premises
- Whether the work is at height
- Mould in or behind the old joints
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are unsure, send an email to info@mrmastic.co.uk and we’ll give you an honest view and a quote.
Asking for a quote
There’s no need for technical detail. Just tell us:
- Photos by email, if that is easy
- Where the job is, and your postcode
- What the problem is, such as mould, gaps, leaks or cracking
- How many joints, rooms or windows are involved
Every job is quoted individually. Just email us at info@mrmastic.co.uk with the details and send pictures if you have them.
Walls and rooflines in Vidlin
Vidlin is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on gutter, fascia and roofline joints, especially on the side facing the sea. Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.
In and around Vidlin, as anywhere, good gutter sealing starts with a clean, dry, properly prepared joint.
Vidlin is in the Shetland Islands. If you need gutter sealing in Vidlin, it’s easy to get a quote: please email us at info@mrmastic.co.uk. We cover the Shetland Islands from our Crawley base, Vidlin included. Vidlin is one of 63 towns and villages in the Shetland Islands we cover.
Work in ZE2 is quoted and booked the same way as anywhere else. If you’re just outside Vidlin, we cover Dury (4 miles south), Hamister (4 miles east), Voe (4 miles west), Symbister (4 miles south-east) and Sandwick (4 miles south-east). If you are somewhere remote, a little more planning is needed, so mention it when you ask for a quote.
Around Vidlin
A little further out are The Cabin Museum (1.5 miles south-west). Not far away are Kirkhouse Loch and Setter Hill.
The process
Every visit runs the same way: we check the joints, protect the area around them, do the work and clear up. Most jobs take anything from an hour or two to a few hours. Outside jobs in Vidlin need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We find where the water is coming from and check the gutter is sound.
- The old sealant and dirt are cleaned out of the joint.
- The joint is dried before sealing.
- A gutter sealant is applied to the joint.
- We check the run and clear debris near the joints.
How to prepare
- Tell us if parking is tricky
- Keep children and pets away from the work area
- Let us know about stairs, lifts or work at height
How to get a quote
There’s no standard price list, because every job is different. Instead, we send you a clear quote for your job. To arrange one, send an email to info@mrmastic.co.uk.
Related advice
Vidlin: your questions answered
Does the coastal weather in Vidlin affect outside sealant?
Coastal homes put outside sealant through more weather than inland ones, so preparation and the right sealant matter all the more. It’s worth checking the walls that face the sea first.
Will you come out to Vidlin?
Yes, Vidlin is covered. We work across all of Scotland, islands included, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Where do you work from?
We are a Crawley-based firm. We work across South East England, London and Scotland.
Do I need to be at home?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
What sealant do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.
Can tenants book the work?
Of course. Check with your landlord; we can send the quote to them too.
How do I get a quote for gutter sealing in Vidlin?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You will get a clear quote before any work starts.
Is it OK to seal over old sealant?
No, because it fails. The old sealant always comes out first, so the new sealant bonds properly.
Should I try it myself first?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
What we can’t put right
It helps to know what we cannot do:
- Cracked, split or warped gutter sections
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- Downpipes that are blocked or broken
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly.
What we seal
- uPVC fascias
- Soffit joints
- Gutter joints
- Gutter end caps
- Garage door frames
- Roofline trims