Perth and Kinross · Scotland
Gutter, fascia & soffit sealing in Kinfauns, Perth and Kinross
Gutter sealing in Kinfauns from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Damp on an inside wall under a dripping gutter
- Open joints in fascias and soffits
- Rain getting in around a garage door
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Gutter sealing in Kinfauns, done properly
Sealant only bonds to a clean, dry joint. So the old sealant and grime come out first and the joint is dried before the new sealant goes in. If you’re dealing with open joints in fascias and soffits and damp patches inside below a leaking gutter, we can help.
In and around a place like Kinfauns, many buildings face open ground and take the full weather. Outside joints on exposed walls work hard.
Our work is backed for twelve months, in Kinfauns and everywhere else we cover.
- Where
- Kinfauns (PH2)
- Wider area
- Perth and Kinross
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Aftercare tips
Aftercare is simple:
- Deal with a drip before winter
- Check fascia and soffit joints for gaps
- Don’t leave a sagging gutter
- Keep ladders off the guttering
Leave the new sealant to cure as we advise and avoid disturbing it.
Leaking gutter joints get worse over time. The same spot gets soaked every time it rains, which can lead to staining and damp.
Signs you need gutter sealing in Kinfauns
Sealant on fascias and trims weathers like any outdoor joint. It hardens, shrinks and splits over time.
Common reasons people contact us are:
- Garage door frames letting rain in
- Earlier gutter repairs that have peeled off
- Trim joints where the sealant has failed
- Fascia boards with gaps between them
Around Kinfauns, as everywhere, gutter sealing is only as good as the preparation behind it.
What to look for in a quote
- How hidden problems are handled
- How long to leave it before use
- Which sealant they’ll use, and why
- Is the old sealant removed completely?
The process
Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes anything from an hour or two to a few hours. Somewhere like Kinfauns may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First, we find the drip and check the gutter isn’t cracked or sagging.
- Old sealant and dirt are removed from the joint.
- The joint is dried, because sealant will not bond to a wet surface.
- We seal the joint with a sealant made for gutters and outdoor use.
- The run is checked and any debris near the joints is cleared.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Let us know if you’ve seen damp or leaks
- Mention any sign-in or site rules at work premises
How to get a quote
For gutter sealing in Kinfauns, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Read more
Landlords, agents and businesses in Kinfauns
For anyone letting property in or around Kinfauns, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and photos by email help.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Walls and rooflines in Kinfauns
Kinfauns is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that.
Letting a property close to Perth station? Then a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Kinfauns is about 4 miles east of Perth, in Perth and Kinross. From the centre of Kinfauns to the outskirts, we cover gutter sealing for every kind of property, from flats and houses to offices and hotels. Kinfauns is one of 107 places in Perth and Kinross we cover. There’s also a page for Dundee, about 15 miles away.
All of PH2 is covered for gutter sealing, from the main roads to the quietest streets. If you are just outside Kinfauns, we cover Glencarse (2 miles east), St Madoes (2 miles south-east), Tarsappie (3 miles west), Scoonieburn (3 miles west) and Scone (3 miles north-west). Within a short drive, we also cover Perth (4 miles west), Blairgowrie and Rattray (14 miles north), Auchterarder (15 miles south-west), Kinross (12 miles south), Letham (5 miles west) and Tulloch (5 miles north-west).
Landmarks near Kinfauns
The closest station to Kinfauns is Perth station, about 3.4 miles west. A little further out are Perth Museum (3.1 miles west) and Kinfauns Castle (1.1 miles west). Green spaces nearby include Kinnoull Hill.
Questions from Kinfauns
I let a flat near Perth station. Can you help?
Yes, we work for landlords and agents. You can email us at info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before work begins.
Is Kinfauns within the area you cover?
Yes. Kinfauns is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Are you fully insured?
Yes. We are fully insured, and we’ve been doing sealant work for more than 20 years.
How much does gutter sealing cost in Kinfauns?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Do I need to be at home?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
Is it worth trying it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints, and we clear up when we are done.
Do you take out the old sealant first?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Honest limits
New sealant cannot fix everything, and we will tell you before any work starts. Sealant won’t put right:
- Boards that have decayed or split
- A gutter length that has split
- Blocked downpipes
Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before you book.
What we seal
- Soffit joints
- Gutter joints
- Gutter end caps
- Roofline trims
- uPVC fascias
- Garage door frames
Places near Kinfauns
What else we do in Kinfauns
Quotes for gutter sealing in Kinfauns
Call for a quick quote. The main things that affect it are:
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
- The type of sealant required
- How easy the joints are to reach
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What we need to know
Photos by email are helpful but not essential. Please mention:
- Roughly how big the job is
- How we’d reach the joints
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
We quote each job on its own. Simply drop us a line at info@mrmastic.co.uk and describe the job.